Connector | HARTING Technology Group

Series

Select a value Reset filter
- HARTING Mini PushPull
  
  6
Identification

Select a value Reset filter
- HARTING ix Industrial^®
  
  6
Element

Select a value Reset filter
- Connector sets
  
  6
Termination method

Select a value Reset filter
- IDC termination
  
  6
Rated current

Select a value Reset filter
- ‌ 1.5 A
  
  6
Number of contacts

Select a value Reset filter
- 8
  
  5
- 10
  
  1
Conductor cross-section

Select a value Reset filter
- 0.09 ... 0.14 mm²
  
  3
- 0.23 ... 0.36 mm²
  
  3
Conductor cross-section [AWG]

Select a value Reset filter
- AWG 24 ... AWG 22
  
  3
- AWG 28 ... AWG 26
  
  3
Transmission characteristics

Select a value Reset filter
- Cat. 6_A Class E_A up to 500 MHz
  
  4
Data rate

Select a value Reset filter
- ‌ 1 Gbit/s
  
  4
- ‌ 10 Gbit/s
  
  4
- ‌ 10 Mbit/s
  
  4
- ‌ 100 Mbit/s
  
  4
- ‌ 2.5 Gbit/s
  
  4
- ‌ 5 Gbit/s
  
  4
further contacts

Select a value Reset filter
- + 2x GND
  
  2
Locking type

Select a value Reset filter
- PushPull
  
  6
Shielding

Select a value Reset filter
- Fully shielded, 360° shielding contact
  
  6
Coding

Select a value Reset filter
- Type A
  
  2
- Type B
  
  2
- Type C
  
  2
Material (insert)

Select a value Reset filter
- Polyamide (PA)
  
  6
Material (hood/housing)

Select a value Reset filter
- Polybutylene terephthalate (PBT) / PA66
  
  6
Cable diameter

Select a value Reset filter
- 4.5 ... 7.5 mm
  
  6
Fire protection on railway vehicles

Select a value Reset filter
- EN 45545-2 (2020-08)
  
  4
Requirement set with Hazard Levels

Select a value Reset filter
- R26
  
  4

6 products (of 6)

1/1

MPP-CC-IDC-ix-8p-M-P-STR B-cod AWG22-24

MPP-CC-IDC-ix-8p-M-P-STR B-cod AWG22-24

Article. No: 09 51 121 0004

IDC termination

Rated current: ‌1.5 A

PdNi ≥ 0.64 µm + Au ≥ 0.05 µm over Ni ≥ 2.6 µm Mating side, Sn ≥ 3 µm over Ni ≥ 1.8 µm Termination side

Material: Polybutylene terephthalate (PBT) / PA66

Add to Wishlist

MPP-CC-IDC-ix-10p-M-P-STR B-cod AWG28-26

MPP-CC-IDC-ix-10p-M-P-STR B-cod AWG28-26

Article. No: 09 51 121 0002

IDC termination

Rated current: ‌1.5 A

PdNi ≥ 0.64 µm + Au ≥ 0.05 µm over Ni ≥ 2.6 µm Mating side, Sn ≥ 3 µm over Ni ≥ 1.8 µm Termination side

Material: Polybutylene terephthalate (PBT) / PA66

Add to Wishlist

MPP-CC-IDC-ix-10p-M-P-STR A-cod AWG28-26

MPP-CC-IDC-ix-10p-M-P-STR A-cod AWG28-26

Article. No: 09 51 121 0001

IDC termination

Rated current: ‌1.5 A

Contacts: 8 + 2x GND

PdNi ≥ 0.64 µm + Au ≥ 0.05 µm over Ni ≥ 2.6 µm Mating side, Sn ≥ 3 µm over Ni ≥ 1.8 µm Termination side

Material: Polybutylene terephthalate (PBT) / PA66

Add to Wishlist

MPP-CC-IDC-ix-8p-M-P-STR A-cod AWG22-24

MPP-CC-IDC-ix-8p-M-P-STR A-cod AWG22-24

Article. No: 09 51 121 0003

IDC termination

Rated current: ‌1.5 A

PdNi ≥ 0.64 µm + Au ≥ 0.05 µm over Ni ≥ 2.6 µm Mating side, Sn ≥ 3 µm over Ni ≥ 1.8 µm Termination side

Material: Polybutylene terephthalate (PBT) / PA66

Add to Wishlist

MPP-CC-IDC-ix-10p-M-P-STR C-cod AWG28-26

MPP-CC-IDC-ix-10p-M-P-STR C-cod AWG28-26

Article. No: 09 51 121 0005

IDC termination

Rated current: ‌1.5 A

PdNi ≥ 0.64 µm + Au ≥ 0.05 µm over Ni ≥ 2.6 µm Mating side, Sn ≥ 3 µm over Ni ≥ 1.8 µm Termination side

Material: Polybutylene terephthalate (PBT) / PA66

Add to Wishlist

MPP-CC-IDC-ix-8p-M-P-STR C-cod AWG22-24

MPP-CC-IDC-ix-8p-M-P-STR C-cod AWG22-24

Article. No: 09 51 121 0006

IDC termination

Rated current: ‌1.5 A

PdNi ≥ 0.64 µm + Au ≥ 0.05 µm over Ni ≥ 2.6 µm Mating side, Sn ≥ 3 µm over Ni ≥ 1.8 µm Termination side

Material: Polybutylene terephthalate (PBT) / PA66

Add to Wishlist

Sort by

Part number - ascending

Part number - descending

Relevance

New products

Series - descending

Identification - descending

Element - descending

Termination method - descending

Rated current - descending

Compare

0

Sort by

Filters

0

Product Videos

Topics & Trends

© HARTING Technology Group

Home Contact Privacy Policy Terms of Use Sales and delivery conditions Cookie policy Imprint