Circular connectors | HARTING Technology Group

Product-Finder (2,371 Products)

Series
- Circular connectors 7/8"
  122
- Circular connectors M12
  1487
- Circular connectors M23
  184
- Circular connectors M8
  342
- D-Sub
  6
- Han A^®
  12
- Han D^®
  32
- Han E^®
  31
- Han^® F+B
  28
- Han^® Q
  5
- R 15
  13
- RJ45
  107
- HARAX^®
  19
- har-speed
  4
- preLink^®
  7
Identification
- 2/0
  1
- 7/0
  2
- High Density
  2
- Hybrid
  2
- INOX
  4
- M12-L
  29
- M12-S
  6
- M8-S
  5
- M8-XS
  4
- Magnetics
  18
- Power
  148
- PushPull
  129
- Signal
  136
- Slim Design
  65
- Standard
  6
Element
- Cable assemblies
  1467
- Cable connector
  200
- Connector insert
  2
- Distribution boxes
  77
- Empty housing
  1
- Inserts
  54
- PCB adapter
  139
- PCB connector
  12
- Panel feed through
  106
Specification
- Angled
  73
- Deviating contact configuration
  4
- EtherRail cable (4x 2x AWG 24/7)
  4
- Industrial Ethernet cable (4x 2x AWG 26/7)
  4
- Marking in opposite direction
  4
- Master cable M12, 12-pin
  1
- Master cable M12, 8-pin
  4
- Master cable M16, 14-pin
  5
- Master cable M23, 12-pin
  5
- Master cable M23, 19-pin
  2
- Mating face (A)
  2
- Mating face (B)
  2
- Power over Ethernet (PoE+)
  12
- Pre-assembled on both sides
  727
- Pre-assembled on one side
  748
- Pre-assembled termination shell
  55
- Straight
  250
- Termination shell
  5
- With LED green/yellow
  53
- With conductors
  65
- With faston blades
  2
- With solder termination
  6
- for front mounting
  87
- for rear mounting
  107
- incl. housing
  53
- with conduit
  4
- with integrated transformer
  18
Type of hood/housing
- Bulkhead mounted housing
  24
- Cable to cable housing
  7
- Cover
  6
- Hood
  25
- Panel feed through housing
  5
- Protection cover
  4
- Screw mounted housing
  7
Description of hood/housing
- 11 mm
  1
- 13 mm
  1
- 7 mm
  1
- 9 mm
  1
- Angled
  8
- EMC version
  26
- Front mounting
  12
- Long version
  3
- Rear mounting
  10
- Rotatable
  6
- Straight
  9
- Thermoplastic
  1
- With chain (100 mm)
  2
- With chain (70 mm)
  2
- With fixing cord
  3
- With fixing hole
  7
- With three through holes for fixing screws
  4
- for bulkhead mounted housings
  5
- for cable to cable housing
  5
- for hoods
  4
Type of accessory
- Adapter
  2
- Cable gland
  7
- Cap
  9
- Crimp flange set
  9
- Gender changer
  6
- Housing
  23
- Lock nut
  9
- M12 PushPull adapter
  1
- M12 female-RJ45 panel feed through
  2
- M12-male moving load
  2
- M12-male/female panel feed through
  1
- Panel mounting parts
  1
- Seal
  9
- Set of seals
  4
- Snap ring
  2
- T-splitter
  1
- Termination element
  2
- Y-distributor
  4
- har-speed M12 adapter M12-RJ45
  2
- hexagonal nut
  3
Description of the accessory
- 3-pin
  1
- 4-pin
  6
- 4-pin or 8-pin
  2
- A-coding
  6
- Angled
  2
- B-coding
  2
- Cat. 5
  2
- Cat. 6_A
  4
- D-coding
  6
- D-coding / X-coding
  1
- M10 x 1
  2
- M12 x 1
  1
- M14 x 1
  4
- M16x1.5
  2
- M8 x 0.5
  1
- Metal
  1
- Pg 9
  1
- Screw cap, splice ring, seal
  2
- Shielded
  3
- Spare part
  2
- Straight
  2
- Thermoplastic
  2
- Unshielded
  4
- With PushPull
  3
- X-coding
  4
- for female inserts
  5
- for front mounting
  14
- for male inserts
  4
- for rear mounting
  9
- with cable clip
  2
- with loop
  6
Type of tool
- Crimping tool
  4
- Dynamometric screwdriver
  7
- Locator
  9
- Pneumatic crimping tool
  1
Description of the tool
- 21 01 100 9020
  1
- 21 01 100 9025
  1
- 4 indent crimp in acc. to MIL 22 520/2-01
  2
- for 0.6 mm data contacts
  1
- for 7/8"
  1
- for M12 Power
  1
- for M12 Slim Design
  1
- for M12 female contacts
  1
- for M12 male contacts
  1
- for M12-L
  1
- for M12-S
  1
- for M23 power contacts
  1
- for M23 signal contacts
  2
- for M8
  2
- for har-speed M12 female contacts
  1
- for har-speed M12 male contacts
  1
- for crimping tool 09 99 000 0890
  1
- for part number 09 99 000 0501
  1
- for part number 09 99 000 0501 and Data- und Power contacts Y-coding
  1
- for part number 09 99 000 0509
  1
- for power contacts
  1
- for single D-Sub standard contacts
  1
- for turned male and female contact
  2
Coding
- A-coding
  783
- B-coding
  103
- D-coding
  512
- K-coding
  18
- L-coding
  78
- P-coding
  6
- S-coding
  18
- X-coding
  181
- Y-coding
  7
Termination method
- Axial screw termination
  1
- Crimp termination
  144
- Han-Quick Lock^® termination
  8
- IDC termination
  2
- M12
  48
- M8
  29
- PCB solder termination
  12
- Reflow soldering termination (SMT)
  38
- Reflow soldering termination (THR)
  102
- Screw termination
  39
- Solder termination
  16
- Wave soldering termination
  11
- HARAX^® connection technology
  70
- preLink^® IDC insulation displacement termination
  6
Number of contacts
- 12
  30
- 17
  6
- 19
  6
- 2
  23
- 21
  2
- 3
  70
- 4
  304
- 5
  100
- 6
  8
- 7
  14
- 8
  113
- 9
  10
Rated current
- ‌ 0.5 A
  43
- ‌ 0.8 A
  12
- ‌ 1 A
  3
- ‌ 1.5 A
  2
- ‌ 10 A
  28
- ‌ 12 A
  38
- ‌ 16 A
  51
- ‌ 2 A
  40
- ‌ 20 A
  12
- ‌ 28 A
  6
- ‌ 3 A
  9
- ‌ 4 A
  211
- ‌ 40 A
  1
- ‌ 6 A
  49
- ‌ 6.5 A
  2
- ‌ 7.5 A
  8
- ‌ 8 A
  20
- ‌ 9 A
  64
Transmission characteristics
- Cat. 5 Class D up to 100 MHz
  534
- Cat. 6_A Class E_A up to 500 MHz
  175
Data rate
- ‌ 1 Gbit/s
  132
- ‌ 10 Gbit/s
  132
- ‌ 10 Mbit/s
  554
- ‌ 100 Mbit/s
  560
- ‌ 2.5 Gbit/s
  126
- ‌ 5 Gbit/s
  126
Operating current
- ≤ 10 A
  33
- ≤ 16 A
  31
- ≤ 2 A
  2
- ≤ 20 A
  2
- ≤ 28 A
  4
- ≤ 8 A
  6
Conductor cross-section
- 0.08 ... 0.22 mm²
  2
- 0.08 ... 0.25 mm²
  15
- 0.08 ... 0.25 mm² Data
  4
- 0.08 ... 0.34 mm²
  2
- 0.08 ... 0.56 mm²
  2
- 0.08 ... 1.5 mm²
  12
- 0.08 ... 2.5 mm²
  1
- 0.08 ... 4 mm²
  2
- 0.09 ... 0.5 mm²
  12
- 0.09 ... 0.56 mm²
  2
- 0.09 ... 0.82 mm²
  2
- 0.13 mm²
  1
- 0.13 ... 0.25 mm²
  4
- 0.13 ... 0.33 mm²
  19
- 0.13 ... 0.82 mm²
  36
- 0.14 mm²
  8
- 0.14 ... 0.34 mm²
  18
- 0.14 ... 0.37 mm²
  12
- 0.14 ... 0.56 mm²
  1
- 0.14 ... 0.75 mm²
  15
- 0.14 ... 1 mm²
  4
- 0.14 ... 2.5 mm²
  6
- 0.14 ... 4 mm²
  13
- 0.1 ... 0.12 mm²
  7
- 0.1 ... 0.14 mm²
  1
- 0.22 ... 0.32 mm²
  7
- 0.25 mm²
  12
- 0.25 ... 0.34 mm²
  4
- 0.25 ... 0.5 mm²
  2
- 0.25 ... 0.52 mm²
  2
- 0.25 ... 1.5 mm²
  4
- 0.33 ... 0.82 mm²
  4
- 0.34 mm²
  10
- 0.34 ... 0.5 mm²
  2
- 0.34 ... 0.75 mm²
  10
- 0.5 mm²
  18
- 0.5 mm² max.
  6
- 0.5 ... 2.5 mm²
  23
- 0.75 mm²
  13
- 0.75 ... 1.5 mm²
  23
- 0.75 ... 2.5 mm²
  8
- 1 mm²
  12
- 1 mm² max.
  12
- 1.5 mm²
  29
- 1.5 mm² max.
  17
- 2.5 mm²
  29
- 2.5 mm² max.
  4
- 2.5 ... 4 mm²
  2
- 3 mm²
  2
- 4 mm²
  4
Conductor cross-section
- AWG 12
  6
- AWG 14
  29
- AWG 16
  46
- AWG 18
  20
- AWG 18 ... AWG 16
  17
- AWG 19
  2
- AWG 19 ... AWG 14
  2
- AWG 19 ... AWG 16
  2
- AWG 20
  22
- AWG 20 ... AWG 14
  12
- AWG 20 ... AWG 17
  1
- AWG 21
  5
- AWG 22
  18
- AWG 22 ... AWG 17
  1
- AWG 22 ... AWG 18
  14
- AWG 22 ... AWG 20
  2
- AWG 24
  10
- AWG 24 ... AWG 20
  4
- AWG 24 ... AWG 22
  11
- AWG 26
  9
- AWG 26 ... AWG 17
  2
- AWG 26 ... AWG 18
  51
- AWG 26 ... AWG 20
  1
- AWG 26 ... AWG 22
  49
- AWG 26 ... AWG 23
  4
- AWG 27 ... AWG 26
  8
- AWG 28 ... AWG 20
  14
- AWG 28 ... AWG 23
  15
- AWG 28 ... AWG 23 Data
  4
- AWG 28 ... AWG 24
  2
Gender
- Female
  366
- Male
  297
Shielding
- Shield connection with crimp flange
  28
- Shielded
  403
- Unshielded
  125
Locking type
- ComLock rapid locking
  28
- ComLock-S rapid locking
  5
- PushPull
  102
- Screw locking
  408
Number of cores
- 12
  83
- 13
  11
- 17
  12
- 19
  16
- 2
  80
- 3
  171
- 4
  758
- 5
  135
- 6
  4
- 8
  193
Core structure
- 12x 0.14 mm²
  67
- 12x AWG 18
  16
- 17x AWG 18
  16
- 2x 0.75 mm²
  11
- 2x 1.5 mm²
  11
- 2x 2x AWG 22
  11
- 2x 2x AWG 22/7
  3
- 2x AWG 20 + 8x AWG 24
  12
- 2x AWG 22
  58
- 2x AWG 24
  38
- 3x 0.25 mm²
  121
- 3x 0.34 mm²
  36
- 3x 0.75 mm² + 4x 0.34 mm²
  6
- 3x 0.75 mm² + 8x 0.34 mm²
  6
- 3x 1.5 mm²
  14
- 3x AWG 18 + 16x AWG 22
  28
- 3x AWG 18 + 8x AWG 22
  12
- 4x 0.25 mm²
  120
- 4x 0.34 mm²
  134
- 4x 1.5 mm²
  14
- 4x 2 Twisted Pair
  48
- 4x 2x AWG 24/7
  4
- 4x 2x AWG 26/7
  41
- 4x 6.0 mm²
  70
- 4x AWG 16 + 2x AWG 17
  4
- 4x AWG 22/7
  425
- 5G 2.5 mm²
  11
- 5x 0.25 mm²
  8
- 5x 0.34 mm²
  51
- 5x 1.5 mm²
  44
- 5x 2.5 mm²
  12
- 8x 0.14 mm²
  30
- 8x 0.25 mm²
  37
- 8x AWG 24
  3
- 8x AWG 24/7
  20
- 8x AWG 26/7
  18
- PE
  38
Cable diameter
- 1.9 ... ‌2.5 mm
  1
- 2.5 ... ‌3.5 mm
  1
- 2.5 ... ‌5.1 mm
  1
- 2.9 ... ‌4 mm
  1
- 4 ... ‌5.1 mm
  1
- 4.2 ... ‌5.4 mm
  1
- 4.5 ... ‌8.8 mm
  2
- 4.7 ... ‌6 mm
  1
- 5.5 ... ‌7.2 mm
  1
- 5.7 ... ‌8.8 mm
  1
- 6 ... ‌8 mm
  1
- 6 ... ‌9 mm
  1
Cable diameter
- 1.9 ... 3.5 mm
  1
- 2.5 ... 5.1 mm
  4
- 2.9 ... 5.1 mm
  4
- 4.5 ... 8.3 mm
  1
- 4.5 ... 8.8 mm
  29
- 4 ... 11.6 mm
  18
- 4 ... 5.1 mm
  2
- 4 ... 5.5 mm
  12
- 4 ... 8 mm
  24
- 5.7 ... 8.8 mm
  49
- 5.8 ... 13.5 mm
  2
- 5 ... 9.5 mm
  7
- 6.2 ... 6.8 mm
  6
- 6.6 mm ± 0.2 mm
  97
- 6.6 mm ± 0.3 mm
  11
- 6.7 mm ± 0.3 mm
  26
- 6.8 ... 12.5 mm
  2
- 6 ... 8 mm
  8
- 6 ... 9 mm
  13
- 7 ... 8.8 mm
  4
Cable length
- 0.1 m
  2
- 0.2 m
  8
- 0.3 m
  27
- 0.4 m
  6
- 0.5 m
  107
- 0.6 m
  18
- 0.7 m
  3
- 0.8 m
  3
- 1 m
  156
- 1.1 m
  3
- 1.2 m
  2
- 1.3 m
  2
- 1.4 m
  4
- 1.5 m
  135
- 1.6 m
  2
- 1.8 m
  2
- 10 m
  187
- 100 m
  1
- 11 m
  4
- 12 m
  11
- 12.5 m
  2
- 13 m
  6
- 14 m
  4
- 15 m
  43
- 16 m
  2
- 18 m
  4
- 2 m
  150
- 2.5 m
  13
- 2.8 m
  2
- 20 m
  42
- 23 m
  2
- 25 m
  16
- 3 m
  84
- 3.5 m
  7
- 3.6 m
  2
- 30 m
  18
- 35 m
  8
- 4 m
  30
- 4.5 m
  4
- 40 m
  9
- 5 m
  189
- 5.5 m
  2
- 50 m
  5
- 6 m
  28
- 7 m
  14
- 7.5 m
  116
- 70 m
  3
- 8 m
  10
- 9 m
  7
- 90 m
  2
Material (cable)
- Elastomer
  97
- PE
  20
- PUR (polyurethane)
  700
- PVC
  691
- Polyolefin copolymer
  7
Total number of ports
- 4
  33
- 6
  6
- 8
  38
UL / CSA
- CSA-C22.2 CYJV7.E500416
  48
- CSA-C22.2 No. 182.3 CYJV8.E302521
  65
- CSA-C22.2 No. 182.3 ECBT8.E102079
  114
- CSA-C22.2 No. 182.3 ECBT8.E235076
  33
- CSA-C22.2 No. 182.3 PVVA8.E318390
  1
- CSA-C22.2 No. 182.4, No. 233-09 DUXR8.E470046
  5
- UL 1863 DUXR2.E470046
  5
- UL 1977 ECBT2.E102079
  116
- UL 1977 ECBT2.E235076
  141
- UL 2237 PVVA2.E318390
  3
- UL 2238 CYJV.E500416
  48
- UL 2238 CYJV2.E302521
  65
Specifications
- EN 175301-801
  4
- EN 45545-1
  9
- EN 45545-2
  97
- EN 45545-2 R26: HL1, HL2, HL3
  7
- EN 45545-5
  9
- EN 60664-1
  99
- IEC 61076-2-101
  232
- IEC 61076-2-104
  22
- IEC 61076-2-109
  56
- IEC 61076-2-111
  76
- IEC 61076-2-113
  7
- IEC 61076-2-114
  18
- IEC 61984
  99
- UN/ECE-R 118 fire protection for rolling stock
  295