MPP-CC-IDC-ix-10p-M-P-STR A-cod AWG28-26 | HARTING Technology Group

Matching Products

Combinables

Tools

Accessories

Part number: 09 51 121 0001

MPP-CC-IDC-ix-10p-M-P-STR A-cod AWG28-26

Image is for illustration purposes only. Please refer to product description.

Properties Overview

Connectors

Connector sets

IDC termination

Rated current: ‌1.5 A

Contacts: 8 + 2x GND

Copper alloy

PdNi ≥ 0.64 µm + Au ≥ 0.05 µm over Ni ≥ 2.6 µm Mating side, Sn ≥ 3 µm over Ni ≥ 1.8 µm Termination side

PushPull

Material: Polybutylene terephthalate (PBT) / PA66

Degree of protection: IP65 / IP67

Notes

Compare

Free Sample

Part number: 09 51 121 0001

MPP-CC-IDC-ix-10p-M-P-STR A-cod AWG28-26

Notes

Compare

Free Sample

All functionalities, price and availability after sign in.

Combinables

Tools

Accessories

Product Details

Identification

Version

Termination method IDC termination
Shielding Fully shielded, 360° shielding contact
Number of contacts 8
further contacts + 2x GND
Coding Type A
Locking type PushPull
Pack contents incl. housing, HARTING ix Industrial^®-connector type A, shielding and cable gland

Technical characteristics

Conductor cross-section 0.09 ... 0.14 mm²
Conductor cross-section [AWG] AWG 28 ... AWG 26
Wire outer diameter ≤1.2 mm
Rated current ‌ 1.5 A
Rated current 3 A per contact when used with 4 contacts (1,2,6,7)
Rated voltage
‌ 50 V AC

‌ 60 V DC
Transmission characteristics Cat. 6_A Class E_A up to 500 MHz
Data rate
‌ 10 Mbit/s

‌ 100 Mbit/s

‌ 1 Gbit/s

‌ 2.5 Gbit/s

‌ 5 Gbit/s

‌ 10 Gbit/s
Insulation resistance >100 MΩ
Contact resistance ≤ 30 mΩ
Shielding resistance ≤ 100 mΩ
Limiting temperature -40 ... +70 °C
Storage temperature -60 ... +85 °C
Relative humidity
95 % Non-condensing (operation)

95 % Non-condensing (storage/transport)
Mating cycles ≥ 750
Degree of protection acc. to IEC 60529 IP65 / IP67
Cable diameter 4.5 ... 7.5 mm
Test voltage U_r.m.s.
0.5 kV (contact-contact)

0.5 kV (contact-shielding)
Vibration resistance
10-500 Hz, 5 g, 0.35 mm, 2h/axis

5.72 m/s² acc. to IEC 61373 Category 1 Class B
Shock resistance
50 g / 11 ms, 3 shocks / axis and direction

5 g / 30 ms, 5 shocks / axis and direction acc. to IEC 61373 Category 1 Class B

Material properties

Material (insert) Polyamide (PA)
Colour (insert) Black
Material (shielding)
Stainless steel

Ni ≥ 1.6 µm Mating side (shielding)

Sn ≥ 0.9 µm over Ni ≥ 0.9 µm Termination side (shielding)
Material (contacts) Copper alloy
Surface (contacts)
PdNi ≥ 0.64 µm + Au ≥ 0.05 µm over Ni ≥ 2.6 µm Mating side

Sn ≥ 3 µm over Ni ≥ 1.8 µm Termination side
Material (hood/housing) Polybutylene terephthalate (PBT) / PA66
Colour (hood/housing) Black
Material (seal) HNBR / NBR
Colour (seal) Black
Material (locking) Polybutylene terephthalate (PBT)
Colour (locking) Yellow
Material flammability class acc. to UL 94 V-0
RoHS compliant
ELV status compliant
China RoHS e
REACH Annex XVII substances Not contained
REACH ANNEX XIV substances Not contained
REACH SVHC substances Not contained
ECHA SCIP number 5b0b428a-c671-4c90-9b6d-16804ea5737a
California Proposition 65 substances Yes
California Proposition 65 substances Nickel
Fire protection on railway vehicles EN 45545-2 (2020-08)
Requirement set with Hazard Levels R26