This product is available upon request. Please contact your local HARTING subsidiary.

Image is for illustration purposes only. Please refer to product description.

MPP-CC-IDC-ix-10p-M-P-STR A-cod AWG28-26

Connectors, IDC termination, Rated current: ‌1.5 A, Contacts: 8, + 2x GND, Copper alloy, PushPull, Material: Polybutylene terephthalate (PBT) / PA66, Degree of protection: IP65 / IP67

Part number: 09 51 121 0001

Please or for a free MyHARTING Account to see all information about product availability and your order.

Technical data & Downloads

Technical data

Go to:

Identification
Version
Technical characteristics
Material properties
Specifications and approvals
Commercial data

Identification

Category Connectors
Series HARTING Mini PushPull
Identification ix Industrial^®
Element Connector sets

Version

Termination method IDC termination
Locking type PushPull
Shielding Fully shielded, 360° shielding contact
Number of contacts 8
Additional contacts + 2x GND
Coding Type A
Pack contents incl. housing, HARTING ix Industrial^®-connector type A, shielding and cable gland

Technical characteristics

Conductor cross-section 0.09 ... 0.14 mm²
Conductor cross-section AWG 28 ... AWG 26
Wire outer diameter ≤1.15 mm
Rated current ‌ 1.5 A
Rated voltage
50 V AC

60 V DC
Contact resistance ≤ 30 mΩ
Shielding resistance ≤ 100 mΩ
Limiting temperature -40 ... +70 °C
Storage temperature -30 ... +60 °C
Insertion force ≤ 25 N
Withdrawal force ≤ 25 N
Mating cycles ≥ 750
Degree of protection acc. to IEC 60529 IP65 / IP67
Cable diameter 4.5 ... 7.5 mm
Test voltage U_r.m.s. 0.5 kV
Transmission characteristics Cat. 6_A Class E_A up to 500 MHz
Data rate
‌ 10 Mbit/s

‌ 100 Mbit/s

‌ 1 Gbit/s

‌ 2.5 Gbit/s

‌ 5 Gbit/s

‌ 10 Gbit/s