Details
Compared to the standard contact block, the contact block has a weaker return spring. Please observe the installation situation according to the installation instructions.
Technical characteristics
Conductor cross-section
0.5 ... 2.5 mm²
Actuation path
6 mm
Rated current
≥ 0.001 A
Rated current
under laboratory conditions
Rated voltage
≥ 5 V
Rated impulse voltage
4 kV
Conditional short-circuit current
1,000 A
Short-circuit device (recommendation)
SCPD 16 A, Char. C
Overvoltage category
III (protection by low voltage)
Contact resistance
< 20 mΩ
Stripping length
9 mm
Tightening torque
0.8 ... 1 Nm Screw terminal
Operating temperature
-30 ... +85 °C Without light
-30 ... +65 °C with LED lighting
Storage temperature
-50 ... +85 °C
Degree of protection acc. to IEC 60529
IP20
Bounce time
< 10 ms
Material properties
Colour (insert)
Red
Material (contacts)
Copper alloy
Surface (contacts)
Ag over Ni
RoHS
compliant
ELV status
compliant
China RoHS
e
REACH Annex XVII substances
Not contained
REACH ANNEX XIV substances
Not contained
REACH SVHC substances
Not contained
California Proposition 65 substances
Not contained
Fire protection on railway vehicles
EN 45545-2 (2020-08)