Order separately the single wire seal or the hoods/housings for an IP65 performance.
Details
A Han® 1A configuration that only consists of inserts (with or without strain relief, 09 10 000 5300) is an unenclosed connector according to IEC 61984. In this case protection against electric shock must be provided by the installation methods of the user.
Contact inserts must not be coupled or decoupled under electrical load.
Contact inserts must not be powered-up in the un-mated condition.
Contact inserts with screw termination technology (2+PE and 3+PE) only differ in the number of contacts. If both variants are used in one application, the user must prevent incorrect mating! Safety instructions according to VDE 0100-410, Chapter 414.4.3 and EN 60204-1, Chapter 13.4.5 d) must be observed.
Technical characteristics
Conductor cross-section
0,75 ... 1,5 mm²
Rated current
10 A
Rated voltage conductor-earth
230 V
Rated voltage conductor-conductor
400 V
Rated impulse voltage
4 kV
Pollution degree
3
Rated current acc. to UL
10 A AWG 16
Rated voltage acc. to UL
250 V
Insulation resistance
>108 Ω
Tightening torque
0,25 Nm
Limiting temperature
-30 ... +90 °C
Mating cycles
≥ 100
Degree of protection acc. to IEC 60529
IP20
Material properties
Material (insert)
Poliamidă (PA)
Colour (insert)
RAL 9005 (negru de fum)
Material (contacts)
Aliaj de cupru
Surface (contacts)
Placat cu argint
Material (seal)
NBR
Colour (seal)
Negru
Material flammability class acc. to UL 94
V-0
RoHS
compatibil cu excepţie
RoHS exemptions
6(c): Aliaj de cupru cu conținut de plumb de până la 4 % din greutate
ELV status
compatibil cu excepţie
China RoHS
50
REACH Annex XVII substances
Nu este inclus
REACH ANNEX XIV substances
Nu este inclus
REACH SVHC substances
Da
REACH SVHC substances
Plumb
ECHA SCIP number
5dbb3851-b94e-4e88-97a1-571845975242
California Proposition 65 substances
Da
California Proposition 65 substances
Plumb
Fire protection on railway vehicles
EN 45545-2 (2020-08)
Requirement set with Hazard Levels
R22 (HL 1-3)
R23 (HL 1-3)
Specifications and approvals
Specifications
EN 45545-2 Protecţie la incendiu în vehiculele feroviare
IEC 61373 Categoria 1 Clasa B
IEC 60664-1
IEC 61984
UL / CSA
UL 1977 ECBT2.E235076
CSA-C22.2 No. 182.3 ECBT8.E235076
Vă rugăm să contactaţi filiala dvs. locală HARTING pentru informaţii suplimentare.
Approvals
DNV GL
Commercial data
Packaging size
1
Net weight
14.37 g
Country of origin
Germany
European customs tariff number
85366990
GTIN
5713140185739
ETIM
EC000438
eCl@ss
27440205 Contact insert for industrial connectors