Close
Hand crimping tools
Filters
  • Type of tool
    Select a value Reset filter
    • 8-indent crimping tool
      1
    • Assembly tool
      4
    • Crimp die
      1
    • Crimping tool
      3
    • Hand crimping tool
      38
    • Locator
      1
    • Service crimping tool
      1
    • Tool insert
      1
  • Description of the tool
    Select a value Reset filter
    • 4 indent crimp in acc. to MIL 22 520/2-01
      1
    • Angled
      2
    • BC
      1
    • BC / FC / har-bus® 64
      1
    • BC / har-bus® 64
      1
    • Crimp die included
      1
    • FC 1
      2
    • FC 2
      2
    • FC 3
      2
    • HARTING UIC 558: 0.75 ... 1 mm²
      1
    • Han D®, Han E®, DIN 41626, Ferrule, F-SMA, -ST
      1
    • Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224)
      2
    • Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227)
      2
    • Han E®: 0.14 ... 4 mm²
      2
    • Han E®: 0.5 ... 2.5 mm²
      1
    • Han E®: 0.5 ... 4 mm²
      1
    • Han-Yellock®: 0.14 ... 4 mm²
      2
    • Han-Yellock®: 0.5 ... 2.5 mm²
      1
    • Han-Yellock®: 0.5 ... 4 mm²
      1
    • Han® C: 1.5 ... 4 mm²
      3
    • Han® C: 4 ... 10 mm²
      1
    • Han® HsB: 1.5 ... 4 mm²
      1
    • SC, F-SMA F-ST
      2
    • Top part
      1
    • acc. to DIN 41626
      2
    • acc. to DIN 46228
      2
    • for 250 bandoliered contacts
      3
    • for 500 bandoliered D-Sub high density contacts
      1
    • for 500 bandoliered contacts
      1
    • for 500 bandoliered standard contacts
      1
    • for D-Sub
      1
    • for FO connector (glass fibre)
      1
    • for FO connector (plastic fibre)
      1
    • for HARTING RJ Industrial® Gigalink Cat. 6A connectors
      1
    • for HARTING RJ Industrial® Gigalink connectors
      1
    • for HARTING RJ Industrial® PN Compact connector set
      1
    • for HARTING T1 Industrial contacts (AWG 24 ... AWG 22)
      1
    • for HARTING T1 Industrial contacts (AWG 28 ... AWG 26)
      1
    • for HARTING ix Industrial® to assamble the cable strain relief crimping
      1
    • for Han-Fast® Lock single contact
      4
    • for M17 contacts
      1
    • for M23 signal contacts
      1
    • for assembly of D-Sub hoods
      1
    • for coaxial contact
      2
    • for contacts FC 1, FC 2 and FC 3
      1
    • for crimp barrel and crimp flange
      1
    • for following 1 mm POF contacts
      1
    • for in-line cable jack variant
      1
    • for individual DIN 41612 contacts
      6
    • for inner contact die
      1
    • for ix Industrial® assembly tool
      1
    • for outer ferrule
      1
    • for power contacts
      1
    • for signal contacts
      1
    • for single stamped D-Sub contact
      1
    • for turned male and female contacts
      1
    • for wire end ferrules
      4
    • incl. locator
      3
  • Field of application
    Select a value Reset filter
    • Recommended for field use
      1
    • Recommended for production lines
      4
    • for individual, turned male and female contacts
      2
    • up to 1,000 crimping operations per year
      3
    • up to 10,000 crimping operations per year
      1
    • up to 3,000 crimping operations per year
      1
Show all filters
50 products (of 50)
1/2
New products - ascending
Han CRIMP TOOL WITH LOCATOR
Service crimping tool
Han CRIMP TOOL WITH LOCATOR
Article. No: 09 99 000 0021
Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 2.5 mm², Han-Yellock®: 0.5 ... 2.5 mm²
Conductor cross-section: 0.14 ... 2.5 mm²
Add to Wishlist
Han Hand Crimp Tool
Hand crimping tool
Han Hand Crimp Tool
Article. No: 09 99 000 0110
Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han-Yellock®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²
Conductor cross-section: 0.14 ... 4 mm²
Add to Wishlist
Double-Indent Crimping Tool
Crimping tool
Double-Indent Crimping Tool
Article. No: 09 99 000 0888
Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227), Han E®: 0.14 ... 4 mm², Han-Yellock®: 0.14 ... 4 mm², Han® C: 1.5 ... 4 mm²
Add to Wishlist
Crimping Tool Han C 4/6/10 mm2
Hand crimping tool
Crimping Tool Han C 4/6/10 mm2
Article. No: 09 99 000 0377
Han® C: 4 ... 10 mm²
Conductor cross-section: 4 ... 10 mm²
Add to Wishlist
DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.
Hand crimping tool
DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.
Article. No: 09 99 000 0501
for turned male and female contacts, 4 indent crimp in acc. to MIL 22 520/2-01
Conductor cross-section: 0.09 ... 0.82 mm²
Add to Wishlist
basic hand crimp tool BC/FC/har-bus64
Hand crimping tool
basic hand crimp tool BC/FC/har-bus64
Article. No: 09 99 000 0620
for individual DIN 41612 contacts, BC / FC / har-bus® 64
Add to Wishlist
SUB-D CRIMP TOOL SINGLE CONTACT
Hand crimping tool
SUB-D CRIMP TOOL SINGLE CONTACT
Article. No: 09 99 000 0175
for single stamped D-Sub contact
Conductor cross-section: 0.09 ... 0.56 mm²
Add to Wishlist
D SUB HD SERVICE CRIMP TOOL
Hand crimping tool
D SUB HD SERVICE CRIMP TOOL
Article. No: 09 99 000 0596
Add to Wishlist
Crimptool Opening
Hand crimping tool
Crimptool Opening
Article. No: 09 99 000 0647
for crimp barrel and crimp flange
Add to Wishlist
DSUB HAND CRIMP TOOL POWER CONTACT
Hand crimping tool
DSUB HAND CRIMP TOOL POWER CONTACT
Article. No: 09 99 000 0509
for power contacts
Conductor cross-section: 0.5 ... 6 mm²
Add to Wishlist
DSUB HAND TOOLS
Hand crimping tool
DSUB HAND TOOLS
Article. No: 09 99 000 0169
for 500 bandoliered standard contacts
Conductor cross-section: 0.09 ... 0.56 mm²
Add to Wishlist
CRIMPING TOOL
Hand crimping tool
CRIMPING TOOL
Article. No: 09 99 000 0120
for 250 bandoliered contacts, FC 3
Conductor cross-section: 0.5 ... 1.5 mm²
Add to Wishlist
Crimping tool for 1mm POF
Crimping tool
Crimping tool for 1mm POF
Article. No: 20 99 000 1035
for following 1 mm POF contacts, Han D®, Han E®, DIN 41626, Ferrule, F-SMA, -ST
Add to Wishlist
DIN-Tool Crimptool Coax M
Hand crimping tool
DIN-Tool Crimptool Coax M
Article. No: 09 99 000 0194
Crimp die included, for coaxial contact, acc. to DIN 41626
Add to Wishlist
GDS A-B/C CRIMPING TOOL ON REEL
Hand crimping tool
GDS A-B/C CRIMPING TOOL ON REEL
Article. No: 09 99 000 0248
for 500 bandoliered contacts, BC / har-bus® 64
Conductor cross-section: 0.09 ... 0.5 mm²
Add to Wishlist
Ferrule Crimp tool 10mm2
Hand crimping tool
Ferrule Crimp tool 10mm2
Article. No: 09 99 000 0374
for wire end ferrules
Conductor cross-section: 10 mm²
Add to Wishlist
DSUB HAND CRIMP TOOL OUTER COAX CONT.
Hand crimping tool
DSUB HAND CRIMP TOOL OUTER COAX CONT.
Article. No: 09 99 000 0503
for coaxial contact, acc. to DIN 41626, for outer ferrule
Add to Wishlist
D-Sub DIE OUTER COAX CONTACT
Crimp die
D-Sub DIE OUTER COAX CONTACT
Article. No: 09 99 000 0508
for D-Sub
Add to Wishlist
DIN-Tool Crimpzange FC2
Hand crimping tool
DIN-Tool Crimpzange FC2
Article. No: 09 99 000 0119
for 250 bandoliered contacts, FC 2
Conductor cross-section: 0.14 ... 0.56 mm²
Add to Wishlist
Crimping tool Han-Fast Lock 4-10mm²
Hand crimping tool
Crimping tool Han-Fast Lock 4-10mm²
Article. No: 09 99 000 0831
for Han-Fast® Lock single contact, incl. locator
Conductor cross-section: 4 ... 10 mm²
Add to Wishlist
CRIMPING TOOL FOR POF
Hand crimping tool
CRIMPING TOOL FOR POF
Article. No: 20 99 000 1033
for FO connector (plastic fibre), SC, F-SMA F-ST
Add to Wishlist
Crimping tool for glass fibre
Hand crimping tool
Crimping tool for glass fibre
Article. No: 20 99 000 1031
for FO connector (glass fibre), SC, F-SMA F-ST
Add to Wishlist
Crimping tool Han-Fast Lock 1.5/2.5 mm²
Hand crimping tool
Crimping tool Han-Fast Lock 1.5/2.5 mm²
Article. No: 09 99 000 0876
Angled, for Han-Fast® Lock single contact
Conductor cross-section: 1.5 ... 2.5 mm²
Add to Wishlist
Crimping Tool Han HsB 1.5/2.5/4 mm²
Hand crimping tool
Crimping Tool Han HsB 1.5/2.5/4 mm²
Article. No: 09 99 000 0986
Han® HsB: 1.5 ... 4 mm²
Conductor cross-section: 1.5 ... 4 mm²
Add to Wishlist
Crimping Tool Han-Fast Lock 1.5/2.5mm²
Hand crimping tool
Crimping Tool Han-Fast Lock 1.5/2.5mm²
Article. No: 09 99 000 0881
for Han-Fast® Lock single contact, incl. locator
Conductor cross-section: 1.5 ... 2.5 mm²
Add to Wishlist
Crimping tool Han-Fast Lock 4-10mm² angl
Hand crimping tool
Crimping tool Han-Fast Lock 4-10mm² angl
Article. No: 09 99 000 0877
Angled, for Han-Fast® Lock single contact
Conductor cross-section: 4 ... 10 mm²
Add to Wishlist
DSUB HAND CRIMP TOOL SIGNAL CON.W.P
Hand crimping tool
DSUB HAND CRIMP TOOL SIGNAL CON.W.P
Article. No: 09 99 000 0505
for signal contacts
Add to Wishlist
D SUB HD CR. TOOL F.500 PCS REEL- CS 20
Hand crimping tool
D SUB HD CR. TOOL F.500 PCS REEL- CS 20
Article. No: 09 99 000 0597
for 500 bandoliered D-Sub high density contacts
Add to Wishlist
Ferrule crimp tool 16 / 25qmm
Hand crimping tool
Ferrule crimp tool 16 / 25qmm
Article. No: 09 99 000 0830
for wire end ferrules
Conductor cross-section: 16 ... 25 mm²
Add to Wishlist
Hand crimping tool UIC 558
Hand crimping tool
Hand crimping tool UIC 558
Article. No: 09 99 000 0967
HARTING UIC 558: 0.75 ... 1 mm²
Conductor cross-section: 0.75 ... 1 mm²
Add to Wishlist
1 2
Compare
0
Sort by
Filters
0

Topics & Trends

HARTING contact: HARTING Inc. of N.America  Bowes Road 1370  60123-5538 Elgin  United States
HARTING support: 866-278-0306E-mail address  (For questions regarding products, orders and user accounts)
Website support: E-mail address  (For technical problems regarding the website)
© HARTING Technology Group
Home Contact Privacy Policy Terms of Use Sales and delivery conditions Cookie policy Imprint