Cable connector | HARTING Technology Group

Withdrawal force

Select a value Reset filter
- ≥ 2 N
  
  1
Performance level

Select a value Reset filter
- 2
  
  1
Test voltage U_r.m.s.

Select a value Reset filter
- 0.75 kV
  
  1
Category

Select a value Reset filter
- Connectors
  
  1
Contact spacing (termination side)

Select a value Reset filter
- 2 mm
  
  1
Contact spacing (mating side)

Select a value Reset filter
- 2 mm
  
  1
Contact rows

Select a value Reset filter
- 2
  
  1
Insulation resistance

Select a value Reset filter
- <10¹⁰ Ω
  
  1
Number of contacts

Select a value Reset filter
- 10
  
  1
Rated current

Select a value Reset filter
- ‌ 1.5 A
  
  1
Material flammability class acc. to UL 94

Select a value Reset filter
- V-0
  
  1
Mating cycles

Select a value Reset filter
- ≥ 250
  
  1
Colour (insert)

Select a value Reset filter
- Black
  
  1
Material (insert)

Select a value Reset filter
- Polyester
  
  1
Material (hood/housing)

Select a value Reset filter
- Stainless steel
  
  1
Locking type

Select a value Reset filter
- Snap-in latches
  
  1
Specification

Select a value Reset filter
- Straight
  
  1
Element

Select a value Reset filter
- Male connector
  
  1
Termination method

Select a value Reset filter
- IDC insulation displacement termination
  
  1
Contact resistance

Select a value Reset filter
- ≤ 35 mΩ
  
  1
Material (contacts)

Select a value Reset filter
- Copper alloy
  
  1
Surface (contacts)

Select a value Reset filter
- Au over Ni Mating side
  
  1
Series

Select a value Reset filter
- har-link^®
  
  1
Conductor cross-section

Select a value Reset filter
- 0.05 ... 0.08 mm²
  
  1
Conductor cross-section [AWG]

Select a value Reset filter
- AWG 30 ... AWG 28
  
  1
UL / CSA

Select a value Reset filter
- CSA-C22.2 No. 182.3 ECBT8.E102079
  
  1
- UL 1977 ECBT2.E102079
  
  1
Limiting temperature

Select a value Reset filter
- -55 ... +125 °C
  
  1
Insertion force

Select a value Reset filter
- ≤ 10 N
  
  1