DIN 41612 | HARTING Technology Group

Product-Finder (1,244 Products)

Connection type
- Cable to cable
  148
- Extender card
  236
- Mezzanine
  496
- Motherboard to daughtercard
  770
- PCB to cable
  559
Series
- DIN 41612
  1172
- DIN 41626
  1
Number of contacts
- 15
  28
- 16
  13
- 160
  4
- 2
  2
- 20
  58
- 24
  2
- 26
  3
- 3
  2
- 30
  46
- 31
  12
- 32
  198
- 45
  2
- 48
  172
- 64
  173
- 80
  23
- 9
  2
- 96
  137
Number of signal contacts
- 0
  2
- 21
  3
- 24
  35
- 42
  21
- 6
  5
- 60
  23
- 78
  23
Rated current
- ‌ 1 A
  6
- ‌ 15 A
  45
- ‌ 2 A
  636
- ‌ 6 A
  171
Operating current
- ≤ 0.4 A
  1
- ≤ 1.4 A
  5
- ≤ 1.5 A
  7
- ≤ 10 A
  4
- ≤ 2 A
  6
- ≤ 20 A
  8
- ≤ 40 A
  18
Performance level
- 1
  285
- 2
  571
- 3
  74
- AU 30
  10
- AU 50
  21
- NM 30 (S4)
  10
- acc. to IEC 60603-2
  875
Identification
- Type 2B
  24
- Type 2C
  60
- Type 2F
  4
- Type 2Q
  10
- Type 2R
  32
- Type 3B
  12
- Type 3C
  23
- Type 3Q
  24
- Type 3R
  46
- Type B
  55
- Type C
  175
- Type C extended
  1
- Type D
  33
- Type E
  39
- Type F
  111
- Type F9
  2
- Type FM
  2
- Type G
  8
- Type H
  16
- Type H15
  28
- Type H16
  3
- Type H3
  2
- Type M
  38
- Type M invers
  36
- Type M-flat
  23
- Type MH
  16
- Type MH 21+5
  3
- Type MH 24+7
  12
- Type Q
  16
- Type R
  63
- Type R (HE11)
  14
- Type R extended
  3
- Type RM
  3
- har-bus^® 64
  1
- low-profile
  6
Gender
- Female contact
  31
- Female contact for female connectors
  17
- Female contact for male connectors
  7
- Male contact
  10
- Male contact for female connectors
  6
- Male contact for male connectors
  17
Type of contact
- Coaxial contact
  14
- Crimp contact
  48
- PCB solder contact
  12
- Press-in contact
  2
- Screw contact
  1
- Solder contact
  12
Element
- Distributor
  3
- Female connector
  430
- Male connector
  443
Description of the contact
- Angled
  270
- Kinked
  14
- Leading contact
  3
- Straight
  601
- With knurled area
  2
- for cables RG 179 BU, 187 AU
  1
Type of accessory
- Cable clamp
  4
- Code comb
  10
- Coding pin
  9
- Distance fixing bracket
  6
- Fixing bracket
  2
- Fixing brackets
  3
- Fixing brackets A
  4
- Fixing brackets B
  30
- Fixing brackets C
  6
- Fixing brackets R
  2
- Frame
  3
- Identification strip
  2
- Insert for shell housing
  15
- Junction element O
  1
- Locking lever
  9
- Mechanical guiding and first mating ground connection
  1
- Mezzanine Adapter
  4
- Open hood
  3
- Pin shroud
  64
- Protection and fixing strip
  2
- Protection cap
  1
- Protection strip
  1
- Screw
  8
- Shell housing
  22
- Strain relief
  1
Description of the accessory
- 10 mm
  1
- 15 mm
  13
- 17 mm
  1
- 2 x Ø6.5
  1
- 20 mm
  15
- 2x Ø10
  1
- 2x Ø11
  2
- 2x Ø11.5
  1
- 2x Ø12.5
  1
- Bottom (pos. 32)
  2
- Fits female connector sand I element crimp
  2
- For earth termination
  1
- For fixing brackets R
  1
- For fixing of shell housing
  4
- For interface connector I
  1
- For shell housing D20 metal
  1
- Left
  23
- Locking lever for U- and I-element only latchable
  1
- M2.2 x 12
  1
- M2.2 x 8
  1
- M2.2 x 9.5
  1
- M2.5 x 16
  1
- M2.5 x 20
  1
- M2.5 x 26
  1
- M4 x 8
  1
- Multiple fixing
  20
- Narrow
  1
- On pcb without fixing possibility in 19" racks
  2
- Position 1
  1
- Position 32
  1
- R 1
  1
- R 32
  1
- Right
  22
- Short version for a full metal locking lever
  2
- Single fixing
  22
- Standard
  1
- Suitable for shell housing D 20/2
  5
- Suitable for shell housing D 20/2 and D 20/4
  8
- Suitable for shell housing D 20/2 and D 20/4 metallised
  8
- Suitable for shell housing D 20/2 metallised
  3
- The shroud is assembled onto the Interface connector I and is screw fixed onto the pcb or to the rack.
  1
- Top (pos. 2)
  2
- Type 2R
  3
- Type B
  1
- Type C
  2
- Type C, 2C
  1
- Type D
  3
- Type E
  3
- Type F
  6
- Type Q
  1
- Type R
  2
- Type R, 2R
  1
- With 2 contact sockets and ground termination
  2
- With coding
  6
- With ejector handle
  2
- With locking levers
  4
- With locking washer
  1
- With nut
  1
- With nut M 2.5 DIN 562
  2
- With nut M 2.5 DIN EN ISO 4036
  4
- With nut M2.5
  12
- With pin shroud for pcb distance 37.5 mm
  2
- With pin shroud for pcb distance 41 mm
  2
- With shroud coding
  1
- With strain relief
  1
- Without contact elements
  1
- Without ejector handle
  2
- Without locking levers
  5
- Without nut
  5
- for 19" racks according to DIN EN 60297
  19
- for 20 mm shell housing
  2
- for 55 mm height
  2
- for 60 mm height
  2
- for har-modular^® P module
  2
- for har-modular^® T module - male connector
  2
- for angled male connectors
  3
- for female connectors
  8
- for female connectors type 2B
  1
- for female connectors type 2C
  20
- for female connectors type 3B
  1
- for female connectors type 3C
  1
- for female connectors type B
  1
- for female connectors type C
  30
- for female connectors with wrap posts
  2
- for inverse male connectors on pcb’s
  2
- for male connectors
  41
- for male connectors type 2R
  20
- for male connectors type R
  30
- for shell housing 2C, 3C
  2
- for shell housing B
  7
- for shell housing C
  6
- for shell housing D 20
  5
- for shell housing D 20/2
  2
- for shell housing D 20/4
  2
- for type E with press-in pins
  4
- for type F
  2
- for type F "low profile" with press-in pins
  5
- for types D, E, F and interface connectors I
  2
- for types F, H and MH
  2
- with welded coding
  10
Type of tool
- Adapter for height compensation
  1
- Assembly tool
  3
- Base plate
  1
- Bench press
  1
- Bottom tool
  2
- CPM press-in machine
  1
- Crimping head
  4
- Crimping insert
  4
- Crimping machine BK
  1
- Crimping tool
  11
- Guide frame with base plate
  2
- Insert blocks
  6
- Locator
  2
- Pliers
  1
- Pneumatic press
  1
- Press-out tool
  2
- Quick change tool
  1
- Removal tool
  6
- Replacement-tip
  2
- Service case
  1
- Support block
  1
- Termination support
  2
- Top tool
  10
Description of the tool
- 40 kN
  1
- BC
  1
- BC / FC / har-bus^® 64
  1
- BC / FC 1 / har-bus^® 64
  1
- BC / har-bus^® 64
  4
- Crimp die included
  1
- DIN 41612
  5
- FC
  1
- FC 1
  3
- FC 2
  4
- FC 3
  5
- Insertion tool for single male press-in contacts
  1
- Long type for pcb size x = 123.5 ... 668.5 mm
  1
- Narrow
  1
- Only for short posts and PCB thickness < 1.6 mm and without guide frame
  2
- Standard type for pcb size x = 123.5 ... 309.5 mm
  1
- Suitable for 09 99 000 0282 and all CPM machines
  1
- To remove single male contacts
  1
- Type 2Q
  1
- Type 2R
  1
- Type 3Q
  1
- Type 3R
  1
- Type B, 2B, 3B, C, 2C, 3C
  1
- Type B, 2B, 3B, C, 2C, 3C, M, F, H
  1
- Type B, 2B, 3B, C, 2C, 3C, M, Q, 2Q, 3Q, R, 2R, 3R, E, F, H, har-bus^® 64
  1
- Type C
  1
- Type E, F, H
  1
- Type F, H
  1
- Type M (24+8)
  1
- Type M (42+6)
  1
- Type M (60+4)
  1
- Type M (78+2)
  1
- Type Q
  1
- Type Q, 2Q
  1
- Type Q, 2Q, 3Q, R, 2R, 3R
  1
- Type R
  1
- Type R, 2R
  1
- Universal
  1
- acc. to DIN 41626
  1
- for 250 bandoliered contacts
  3
- for 500 bandoliered contacts
  1
- for SEK and D-Sub
  1
- for bandoliered contacts
  4
- for coaxial contact
  1
- for contact replacement in male and female connectors
  2
- for contacts BC / har-bus^® 64
  2
- for contacts FC 1, FC 2 and FC 3
  2
- for contacts in the multi module
  1
- for crimping tool and 5 sets inserts, incl. screwdriver for insert change, without contents
  1
- for female connectors of type F
  1
- for female connectors of types B, 2B, 3B, C, 2C, 3C
  1
- for female connectors of types B, 2B, 3B, C, 2C, 3C, F
  1
- for guide frame
  1
- for individual DIN 41612 contacts
  5
- for individual contacts
  4
- for male connectors of types Q, 2Q, 3Q, R, 2R, 3R
  3
- for moulding
  1
- for part number 09 99 000 0620
  2
- for power contacts
  1
- for press-in contacts
  1
- for rear I/O shroud types C, 2C, R, 2R
  1
- for removal tool 09 99 000 0174
  2
- for termination length 13 ... 13.2 mm
  1
- for termination length 4.5 ... 5.3 mm
  1
- for the save press out of connectors
  2
- for type M
  2
- for use with female connectors
  8
- for use with male and female connectors
  1
- for use with male connectors
  9
- incl. removal jacket
  1
Termination method
- Cage-clamp termination
  1
- Crimp termination
  31
- Faston termination
  14
- IDC insulation displacement termination
  2
- Press-in termination
  149
- Reflow soldering termination (THR)
  88
- Solder lug termination
  18
- Wave soldering termination
  531
- Wrap termination
  88
Conductor cross-section
- 0.09 ... 0.25 mm²
  13
- 0.09 ... 0.25 mm² for FC 1 contacts
  1
- 0.09 ... 0.5 mm²
  9
- 0.09 ... 0.5 mm² for BC contacts
  1
- 0.13 mm² for BC contacts
  1
- 0.14 ... 0.56 mm²
  15
- 0.14 ... 0.56 mm² for FC 2 contacts
  1
- 0.14 ... 1.5 mm²
  1
- 0.5 ... 1.5 mm²
  16
- 0.5 ... 1.5 mm² for FC 3 contacts
  1
- 1.5 mm²
  2
- 10 mm²
  3
- 2.5 mm²
  1
- 4 mm²
  2
Conductor cross-section
- AWG 12
  2
- AWG 14
  1
- AWG 16
  2
- AWG 20 ... AWG 16
  12
- AWG 24 ... AWG 28
  10
- AWG 26 ... AWG 13
  1
- AWG 26 ... AWG 20
  12
- AWG 28 ... AWG 20
  6
- AWG 8
  3
Termination length
- 10 mm
  1
- 11.5 mm
  2
- 13 mm
  136
- 13.2 mm
  1
- 16.2 mm
  42
- 17 mm
  51
- 2.5 mm
  40
- 2.7 mm
  1
- 2.9 mm
  69
- 20 mm
  36
- 22 mm
  13
- 3 mm
  78
- 3.2 mm
  2
- 3.5 mm
  3
- 3.6 mm
  5
- 3.7 mm
  18
- 4 mm
  52
- 4.3 mm
  1
- 4.5 mm
  149
- 5 mm
  28
- 5.5 mm
  1
- 6 mm
  4
- 7 mm
  5
- 8 mm
  1
Leading contact on position
- 2
  1
- a1
  22
- a16
  7
- a2
  6
- a32
  21
- b2
  3
- b32
  3
- z2
  3
- z32
  18
- z4
  3
Contact configuration
- Row a, positions 1, 2, ... , 15, 16
  2
- Row a, positions 1, 2, ... , 31, 32
  8
- Row a, positions 1, 3, ... , 29, 31 and row b, positions 2, 4, ... , 30, 32
  3
- Row d, positions 22, 26, 30 and row z, positions 20, 24, 28, 32
  2
- Row d, positions 6, 10, ... , 26, 30 and row z, positions 4, 8, ... , 28, 32
  28
- Rows a and b, positions 1, 2, ... , 15, 16
  32
- Rows a and b, positions 1, 2, ... , 31, 32
  53
- Rows a and b, positions 1, 2, ... , 9, 10
  36
- Rows a and b, positions 2, 4, ... , 14, 16
  1
- Rows a and b, positions 2, 4, ... , 30, 32
  6
- Rows a and c, positions 1, 2, ... , 15, 16
  26
- Rows a and c, positions 1, 2, ... , 31, 32
  88
- Rows a and c, positions 1, 2, ... , 9, 10
  22
- Rows a and c, positions 1, 3, ... , 29, 31
  2
- Rows a and c, positions 2, 4, ... , 14, 16
  1
- Rows a and c, positions 2, 4, ... , 30, 32
  52
- Rows a, b and c, positions 1, 2, ... , 15, 16
  61
- Rows a, b and c, positions 1, 2, ... , 31, 32
  133
- Rows a, b and c, positions 1, 2, ... , 9, 10
  44
- Rows a, b and c, positions 10, 11, ... , 22, 23
  21
- Rows a, b and c, positions 13, 14, ... , 19, 20
  23
- Rows a, b and c, positions 16 and 17
  5
- Rows a, b and c, positions 4, 5, ... , 28, 29
  23
- Rows a, b and c, positions 7, 8, ... , 25, 26
  23
- Rows a, b, c, d and e, positions 1, 2, ... , 31, 32
  2
- Rows a, c and e, positions 2, 4, ... , 30, 32
  33
- Rows z and b, positions 2, 4, ... , 30, 32
  22
- Rows z and d, positions 2, 4, ... , 30, 32
  21
- Rows z and d, positions 4, 8, ... , 28, 32
  3
- Rows z, b and d, positions 2, 4, 6, 8, 10, 12, 14
  2
- Rows z, b and d, positions 20, 22, 24, 26, 28, 30, 32
  3
- Rows z, b, d and f, positions 2, 4, ... , 30, 32
  7
- Rows z, d and b, positions 2, 4, ... , 14, 16 and row z, positions 20, 24, 28, 32 and row d, positions 22, 26, 30
  10
- Rows z, d and b, positions 2, 4, ... , 30, 32
  47
Contact spacing (termination side)
- 10 mm
  2
- 10.16 mm
  15
- 2.54 mm
  702
- 3.81 mm
  26
- 5.08 mm
  169
- 7.62 mm
  95
Contact rows
- 1
  8
- 2
  168
- 3
  641
- 4
  9
- 5
  4
PCB fixing
- With fixing flange
  835
- With snap-in clip
  99
- Without fixing flange
  41
PCB thickness
- ‌1.6 mm +0.8 ‌
  3
- ‌1.6 mm +2.4 ‌
  34
- ‌1.6 mm ±0.2 ‌
  61
- ‌1.8 mm ±0.5 ‌
  15
- ‌2.6 mm ±0.5 ‌
  15
- ‌2.8 mm +0.2 ‌
  2
- ‌2.8 mm -0.3 ‌
  2
- ‌3.2 mm +0.8 ‌
  2
- ‌3.4 mm +0.2 ‌
  2
- ‌3.4 mm -0.3 ‌
  2
- ‌3.4 mm ±0.5 ‌
  15
- ‌3.8 mm ±0.5 ‌
  5
- ‌4.2 mm ±0.5 ‌
  15
- ‌4.8 mm ±0.5 ‌
  5
- ‌5 mm ±0.5 ‌
  10
- ‌5.6 mm ±0.5 ‌
  5
- ‌5.8 mm ±0.5 ‌
  10
- ‌6.4 mm ±0.5 ‌
  5
- ‌6.6 mm ±0.5 ‌
  10
- ‌7.2 mm ±0.5 ‌
  5
- ‌7.4 mm ±0.5 ‌
  10
- ‌8 mm ±0.5 ‌
  5
- ‌8.2 mm ±0.5 ‌
  5
- ≥1.6 mm
  149
Locking type
- Locking lever
  2
- Locking levers or locking screws
  10
- Locking screw
  10
Coding
- Coding with loss of contacts
  836
- D20 coding
  54
- Flange coding
  3
- Hole coding
  179
- Shroud coding
  101
- Side coding
  121
Strain relief
- With cable clamps
  13
- With cable clamps or cable grommets
  2
- With cable tie
  7
Layer thickness
- ≥ 30 µinch
  20
- ≥ 50 µinch
  21

Subcategories

DIN power connectors

DIN power connectors

All DIN types are for 6 A and 15 A per contact
Contact spacing 5.08 mm

DIN signal connectors

DIN signal connectors

All DIN types are for 2 A per contact
Contact spacing 2.54 mm

Contacts

Contacts

Crimp contacts
Special contacts for the M, M-flat, M inverse and M 0+2 types
High power contacts up to 40 A
Coaxial contacts

Accessories

Accessories

Shell housing
Pin shroud
Locking elements and locking lever
Coding
Further accessories

Tools

Tools

Assembly tools
Removal tools
Crimping tools
...

All Products

DIN-Signal C064MS-3,0C1-2

DIN-Signal C064MS-3,0C1-2

Article. No: 09 03 164 6921

Wave soldering termination

Rated current: ‌2 A

Noble metal over Ni Mating side, Sn over Ni Termination side

Performance level: 2, acc. to IEC 60603-2

Coding: Coding with loss of contacts, Side coding

Add to Wishlist

DIN-Signal C096MS-3,0C1-2-clip

DIN-Signal C096MS-3,0C1-2-clip

Article. No: 09 03 396 6921

Wave soldering termination

Rated current: ‌2 A

Noble metal over Ni Mating side, Sn over Ni Termination side

Performance level: 2, acc. to IEC 60603-2

Coding: Coding with loss of contacts

Add to Wishlist

DIN-Power F048MS-3,0C1-2

DIN-Power F048MS-3,0C1-2

Article. No: 09 06 148 6901

Wave soldering termination

Rated current: ‌6 A

Noble metal over Ni Mating side, Sn over Ni Termination side

Performance level: 2, acc. to IEC 60603-2

Coding: Hole coding, Shroud coding, Coding with loss of contacts, D20 coding

Add to Wishlist

DIN-Signal C096FS-2,9C1-2

Female connector

DIN-Signal C096FS-2,9C1-2

Article. No: 09 03 296 6824

Wave soldering termination

Rated current: ‌2 A

Noble metal over Ni Mating side, Sn over Ni Termination side

Performance level: 2, acc. to IEC 60603-2

Coding: Coding with loss of contacts

Add to Wishlist

DIN-Signal C064FS-2,9C1-2

Female connector

DIN-Signal C064FS-2,9C1-2

Article. No: 09 03 264 6824

Wave soldering termination

Rated current: ‌2 A

Noble metal over Ni Mating side, Sn over Ni Termination side

Performance level: 2, acc. to IEC 60603-2

Coding: Coding with loss of contacts

Add to Wishlist

DIN-Power Flow048FS-4,5C1-2

Female connector

DIN-Power Flow048FS-4,5C1-2

Article. No: 09 06 248 6834

Wave soldering termination

Rated current: ‌6 A

Noble metal over Ni Mating side, Sn over Ni Termination side

Performance level: 2, acc. to IEC 60603-2

Coding: Hole coding, Coding with loss of contacts, Shroud coding

Add to Wishlist

DIN-Signal 2C048FS-2,9C1-2

Female connector

DIN-Signal 2C048FS-2,9C1-2

Article. No: 09 23 248 6824

Wave soldering termination

Rated current: ‌2 A

Noble metal over Ni Mating side, Sn over Ni Termination side

Performance level: 2, acc. to IEC 60603-2

Coding: Coding with loss of contacts

Add to Wishlist

DIN-Power F048FC-B

Female connector

DIN-Power F048FC-B

Article. No: 09 06 248 3201

Crimp termination

Coding: Hole coding, Shroud coding, Coding with loss of contacts

PCB fixing: With fixing flange

Thermoplastic resin, glass-fibre filled

RAL 7032 (pebble grey)

Add to Wishlist

DIN-Signal 2C048MS-1C1-2

DIN-Signal 2C048MS-1C1-2

Article. No: 09 23 148 6921

Wave soldering termination

Rated current: ‌2 A

Noble metal over Ni Mating side, Sn over Ni Termination side

Performance level: 2, acc. to IEC 60603-2

Coding: Coding with loss of contacts

Add to Wishlist

DIN-Signal C096FS-4,5C1-2

Female connector

DIN-Signal C096FS-4,5C1-2

Article. No: 09 03 296 6825

Wave soldering termination