D-Sub Subminiature D connectors | HARTING Technology Group

Product-Finder (2,934 Products)

Identification
- Filter
  125
- High Density
  142
- IP67
  138
- Mixed
  209
- Standard
  1507
Element
- Connector
  1938
- Filter adapter
  6
- Gender changer
  4
Specification
- Low-profile
  242
- U.S. Footprint
  48
- With front frame
  32
- With rear frame
  96
Type of contact
- Coaxial contact
  28
- Crimp contact
  115
- Pneumatic contact
  8
- Solder contact
  28
Description of the contact
- Angled
  1000
- High-end
  4
- Short version
  15
- Stamped
  1268
- Straight
  966
- Turned
  610
- for cables RG 174 U, 188 AU, 316 U
  8
- for cables RG 178 BU, 196 AU, 404 U
  4
- for cables RG 179 BU, 187 AU
  8
- for cables RG 58 CU, 141 AU
  4
- for cables RG 59
  4
Series of hoods/housings
- D-Sub
  211
- D-Sub InduCom
  133
- D-Sub, IP67
  26
Description of hood/housing
- Cover can be screwed on
  162
- Cover lockable
  29
- Rear mounting
  2
- Suitable for circuit boards
  5
- With integrated cable gland
  20
- With internal earth
  72
- With shielding plate
  5
- Without internal earth
  56
Version
- 40° side entry
  23
- Side entry
  61
- Top entry
  210
- Top/side entry
  63
- Versatile cable entries
  3
Type of accessory
- Cable clamp
  14
- Cable grommet
  1
- Coding element
  192
- Crimp ferrule
  19
- Crimp flange
  26
- Dummy plugs
  2
- Dust protection cover
  12
- Female screw lock
  15
- Fixed latch
  2
- Front seal rubber
  5
- Hex extender
  1
- Hexagonal screw
  2
- Insert
  2
- Knurled screw
  14
- Latch lock bolt
  6
- Locking bolt
  1
- Locking hook
  1
- Locking latch
  1
- Locking screw
  1
- Locking screw, short
  4
- Protection cover
  46
- Screw
  1
- Screw locking
  6
- Slide locking device
  5
- Strain relief clamp
  4
- U-Clip
  2
Description of the accessory
- Antistatic
  10
- Cable installation
  2
- D-Sub 1 ... 4
  23
- D-Sub 5
  15
- Front mounting
  2
- Full metal part
  2
- Grey head / steel, nickel plated
  2
- Rear mounting
  2
- Spare part
  7
- Thread 4-40 UNC
  22
- Thread 4-40 UNC and screw-lock
  1
- Thread 4-40 UNC x 17.5-8.8 with captive washer
  1
- Thread M3
  19
- Thread M3 x 17.5-8.8 with captive washer
  1
- Thread M3/M3
  1
- Thread M3/UNC
  2
- Thread UNC/M3
  4
- Thread UNC/UNC
  6
- Total length 11 mm
  5
- Total length 13 mm
  4
- Total length 13.2 mm
  1
- Total length 18 mm
  1
- Total length 9.9 mm
  2
- UL 94 V0
  10
- With captive washer
  1
- With chain
  8
- With inside thread
  1
- With nut
  3
- With spacing washer
  2
- With thermo-plastic cover
  2
- Without nut
  7
- for black thermoplastic hood
  1
- for cable clamp
  1
- for female connectors
  29
- for hoods/housings
  2
- for male and female connector
  4
- for male connectors
  29
- for metallised hoods
  2
- for panel thickness 1.6 ... 2 mm
  196
- for press-in connectors with grounding-pins or straight solder with grounding-clips
  2
- for use without Hoods/Housings
  2
Type of tool
- Assembly tool
  2
- Bench press
  1
- Bottom tool
  1
- Cabling tool for termination of flat cable
  1
- Crimp die
  23
- Crimping head
  1
- Crimping machine BK
  1
- Crimping tool
  8
- Hexagonal head screwdriver
  1
- Insert
  1
- Insertion / removal tools
  2
- Locator
  6
- Pneumatic crimping tool
  1
- Quick change tool
  2
- Removal tool
  1
Description of the tool
- 09 93 000 5576 + 09 93 000 5476
  1
- 4 indent crimp in acc. to MIL 22 520/2-01
  2
- D-Sub
  2
- Narrow
  1
- Suitable for D-Sub
  1
- Suitable for D-Sub and SEK
  1
- acc. to DIN 41626
  1
- for 500 bandoliered D-Sub high density contacts
  1
- for 500 bandoliered standard contacts
  1
- for D-Sub
  2
- for D-Sub hoods (50 contacts)
  1
- for D-Sub hoods (9-37 contacts)
  1
- for D-Sub male
  1
- for D-Sub mixed
  2
- for InduCom hoods with hexagonal screws
  1
- for bandoliered D-Sub standard contacts (500 pieces)
  1
- for coaxial contact
  1
- for coaxial, pneumatic, power and high voltage contacts
  1
- for female contacts
  1
- for flange
  2
- for inner contact die
  1
- for male and female contacts
  1
- for male contacts
  1
- for outer ferrule
  2
- for part number 09 99 000 0503
  2
- for part number 09 99 000 0509
  3
- for power contacts
  1
- for signal contacts
  1
- for single D-Sub high density contacts
  1
- for single D-Sub standard contacts
  3
- for single stamped D-Sub contact
  1
- for termination of insulation displacement connectors
  1
- for turned male and female contact
  2
- for wire end ferrules
  1
Termination method
- Crimp termination
  46
- IDC insulation displacement termination
  48
- Reflow soldering termination (SMT)
  366
- Reflow soldering termination (THR)
  267
- Solder cup termination
  242
- Wave soldering termination
  937
- Wrap termination
  18
Rated current
- ‌ 2 A
  168
- ‌ 5 A
  596
- ‌ 6.5 A
  728
- ‌ 7.2 A
  8
- ‌ 7.5 A
  384
- ‌ 8 A
  8
Number of contacts
- 11
  6
- 13
  15
- 15
  436
- 17
  10
- 2
  8
- 21
  15
- 24
  4
- 25
  411
- 26
  26
- 27
  6
- 3
  10
- 36
  6
- 37
  381
- 43
  2
- 44
  26
- 5
  10
- 50
  92
- 62
  26
- 7
  12
- 78
  26
- 8
  2
- 9
  423
Operating current
- ≤ 10 A
  14
- ≤ 2 A
  28
- ≤ 20 A
  16
- ≤ 30 A
  8
- ≤ 40 A
  15
Conductor cross-section
- 0.05 ... 0.25 mm²
  2
- 0.08 ... 0.21 mm²
  2
- 0.08 ... 0.22 mm²
  1
- 0.09 ... 0.13 mm²
  48
- 0.09 ... 0.25 mm²
  33
- 0.09 ... 0.56 mm²
  3
- 0.09 ... 0.82 mm²
  20
- 0.13 ... 0.33 mm²
  5
- 0.14 ... 0.22 mm²
  12
- 0.14 ... 0.25 mm²
  10
- 0.25 mm²
  20
- 0.25 ... 0.5 mm²
  5
- 0.25 ... 0.52 mm²
  33
- 0.33 ... 0.52 mm²
  2
- 0.33 ... 0.82 mm²
  3
- 0.5 mm²
  155
- 0.5 mm² max.
  20
- 0.5 ... 1 mm²
  8
- 0.5 ... 6 mm²
  1
- 2.5 ... 4 mm²
  16
- 2.5 ... 6 mm²
  8
- 4 ... 6 mm²
  15
Conductor cross-section
- AWG 10 ... AWG 8
  15
- AWG 12 ... AWG 10
  8
- AWG 14 ... AWG 12
  16
- AWG 20
  170
- AWG 20 ... AWG 16
  8
- AWG 20 max.
  5
- AWG 22 ... AWG 18
  3
- AWG 22 ... AWG 20
  2
- AWG 24
  20
- AWG 24 ... AWG 20
  37
- AWG 26 ... AWG 22
  5
- AWG 26 ... AWG 24
  22
- AWG 28 ... AWG 18
  18
- AWG 28 ... AWG 20
  1
- AWG 28 ... AWG 24
  35
- AWG 28 ... AWG 26
  48
- AWG 30 ... AWG 24
  2
Performance level
- 1
  433
- 2
  851
- 3
  775
- AU 50
  6
- NM 30 (S4)
  326
- acc. to CECC 75301-802
  946
Gender
- Female
  1088
- Male
  1225
PCB fixing
- With board locks
  824
- With frame
  43
- Without board locks
  20
Locking type
- Female screw lock Thread 4-40 UNC
  1
- Female screw lock Thread M3
  1
- Fixing flange with feed through hole Ø 3.1 mm
  351
- Fixing flange with fitted screw lock 4-40 UNC
  420
- Fixing flange with fitted screw lock M3
  80
- Fixing flange with thread 4-40 UNC
  621
- Fixing flange with thread M3
  472
- Hexagonal screw Thread 4-40 UNC
  11
- Hexagonal screw Thread M3
  8
- Hexagonal screw with captive washer Thread 4-40 UNC
  31
- Hexagonal screw with captive washer Thread M3
  29
- Knurled screw Thread 4-40 UNC
  57
- Knurled screw Thread M2.6
  1
- Knurled screw Thread M3
  36
- Locking screw Thread 4-40 UNC
  10
- Locking screw Thread M3
  10
- Screw locking
  6
- Spring or slide locking
  40
- With long locking screws Thread 4-40 UNC
  14
- With long locking screws Thread M2.6
  5
- With long locking screws Thread M3
  14
- With premounted threaded inserts Thread 4-40 UNC
  7
- With premounted threaded inserts Thread M3
  5
- With short locking screws Thread 4-40 UNC
  43
- With short locking screws Thread M2.6
  5
- With short locking screws Thread M3
  26
- for knurled screws
  10
Flange height
- 6.5 mm
  28
- 7.3 mm
  35
- 7.5 mm
  16
Filter
- C-filter 1000 pF ±20% @ ≤100 V
  43
- C-filter 3900 pF ±20% @ ≤100 V
  41
- C-filter 47 pF ±20% @ ≤100 V
  41
Material (insert)
- Liquid crystal polymer (LCP)
  366
- Plated steel
  119
- Shell: Plated steel
  726
- Shell: brass, tin plated
  138
- Shell: steel, nickel plated
  763
- Shell: steel, tin plated
  192
- Thermoplastic resin (PCT)
  125
- Thermoplastic resin, glass-fibre filled
  138
- Thermoplastic resin, glass-fibre filled (PBT)
  35
- Thermoplastic resin, glass-fibre filled (PBTP)
  932
- Thermoplastic resin, glass-fibre filled (PCT)
  251
- Thermoplastic resin, glass-fibre filled (PPA)
  16
- Thermoplastic resin, glass-fibre filled (Polyester)
  85
Material (hood/housing)
- Metal
  76
- Polycarbonate / Teflon (PTFE)
  6
- Thermoplastic
  161
- Zinc die-cast
  133
Cable diameter
- 1.5 ... 7.5 mm
  18
- 10.5 ... 12 mm
  4
- 11.5 mm
  17
- 11 ... 14 mm
  3
- 11 ... 15 mm
  2
- 14 mm
  1
- 14 ... 16 mm
  1
- 3.3 ... 8.5 mm
  18
- 3.5 ... 11 mm
  20
- 3.5 ... 8.6 mm
  2
- 3 ... 12.5 mm
  22
- 3 ... 15 mm
  22
- 3 ... 7 mm
  8
- 3 ... 9.5 mm
  14
- 4 ... 10.2 mm
  16
- 4 ... 11 mm
  2
- 4 ... 12 mm
  2
- 4 ... 8 mm
  2
- 4 ... 9 mm
  2
- 5.75 ... 11.6 mm
  4
- 5.75 ... 9 mm
  16
- 5 ... 11 mm
  4
- 5 ... 7 mm
  2
- 5 ... 9 mm
  2
- 6 ... 13 mm
  2
- 6 ... 14 mm
  2
- 6 ... 8 mm
  12
- 7 ... 10 mm
  2
- 8 mm
  1
- 8 ... 10.5 mm
  6
- 9.3 ... 12 mm
  10
- 9 ... 11 mm
  4
- 9 ... 12 mm
  4
- 9 ... 14.5 mm
  2
Size
- D-Sub 1
  706
- D-Sub 2
  638
- D-Sub 3
  568
- D-Sub 4
  515
- D-Sub 5
  193
Inner diameter
- 10 mm
  1
- 10.5 mm
  1
- 11 mm
  1
- 11.5 mm
  1
- 12 mm
  1
- 12.5 mm
  1
- 13 mm
  1
- 13.7 mm
  1
- 14 mm
  1
- 3 mm
  2
- 3.5 mm
  2
- 4 mm
  2
- 4.5 mm
  2
- 5 mm
  3
- 5.5 mm
  3
- 6 mm
  3
- 6.5 mm
  3
- 7 mm
  3
- 7.5 mm
  3
- 8 mm
  3
- 8.5 mm
  3
- 9 mm
  3
- 9.5 mm
  1
Outer diameter
- ‌ 10 mm
  3
- ‌ 10.5 mm
  1
- ‌ 11 mm
  1
- ‌ 11.5 mm
  1
- ‌ 12 mm
  1
- ‌ 12.5 mm
  1
- ‌ 13 mm
  1
- ‌ 13.5 mm
  1
- ‌ 14 mm
  1
- ‌ 15 mm
  2
- ‌ 4 mm
  2
- ‌ 4.5 mm
  2
- ‌ 5 mm
  2
- ‌ 5.5 mm
  2
- ‌ 6 mm
  3
- ‌ 6.5 mm
  3
- ‌ 7 mm
  3
- ‌ 7.5 mm
  3
- ‌ 8 mm
  3
- ‌ 8.5 mm
  3
- ‌ 9 mm
  3
- ‌ 9.5 mm
  3
Wire outer diameter
- ‌ 2.4 mm
  10
- ≤ 1.38 mm
  10
Installation height
- ‌ 3.6 mm
  230
- ‌ 4.1 mm
  20
- ‌ 5.4 mm
  20
- ‌ 6.1 mm
  40
- ‌ 6.2 mm
  256
- ‌ 6.3 mm
  79
- ‌ 6.35 mm
  144
- ‌ 6.5 mm
  8
- ‌ 7.3 mm
  593
- ‌ 7.6 mm
  9
- ‌ 8 mm
  32
- ‌ 8.7 mm
  32
Layer thickness
- ≥ 30 µinch
  326
- ≥ 50 µinch
  6
Coding combination
- 1
  16
- 2
  16
- 3
  16
- 4
  16
- 5
  16
- 6
  16
- 7
  16
- 8
  16
- 9
  8
- 10
  8
- 11
  8
- 12
  8
- 13
  8
- 14
  8
- 15
  8
- 16
  8