Close
Crimping tools
  • Can be processed manually
  • Gas-tight crimp connections
  • Ergonomic design
Filters
  • Category
    Select a value Reset filter
    • Tools
      68
  • Conductor cross-section
    Select a value Reset filter
    • 0.09 ... 0.56 mm²
      2
    • 0.09 ... 0.82 mm²
      2
    • 0.14 ... 1.5 mm²
      1
    • 0.14 ... 2.5 mm²
      1
    • 0.14 ... 4 mm²
      3
    • 0.5 ... 2.5 mm²
      1
    • 0.5 ... 4 mm²
      1
    • 0.5 ... 6 mm²
      1
    • 0.75 ... 1 mm²
      1
    • 1.5 ... 2.5 mm²
      2
    • 1.5 ... 4 mm²
      2
    • 10 mm²
      3
    • 10 ... 240 mm²
      2
    • 10 ... 70 mm²
      2
    • 120 mm²
      1
    • 150 mm²
      1
    • 16 mm²
      2
    • 16 ... 25 mm²
      1
    • 185 mm²
      1
    • 240 mm²
      1
    • 25 mm²
      2
    • 35 mm²
      2
    • 4 ... 10 mm²
      3
    • 50 mm²
      2
    • 70 mm²
      2
    • 95 mm²
      1
  • Series
    Select a value Reset filter
    • Han P®
      1
  • Type of tool
    Select a value Reset filter
    • Battery crimping tool set
      1
    • Battery hydraulic tool
      2
    • Check gauge
      1
    • Crimp die
      19
    • Crimping tool
      2
    • Hand crimping tool
      22
    • Hand hydraulic crimping tool
      2
    • Locator
      17
    • Pneumatic crimping tool
      1
    • Service crimping tool
      1
  • Description of the tool
    Select a value Reset filter
    • 09 93 000 5576 + 09 93 000 5476
      1
    • 4 indent crimp in acc. to MIL 22 520/2-01
      2
    • Angled
      2
    • Crimp die acc. to DIN 46235 with pressing width 10 ... 14 mm
      2
    • Crimp die acc. to DIN 46235 with pressing width 9 mm
      2
    • Crimp die included
      1
    • HARTING UIC 558: 0.75 ... 1 mm²
      1
    • Han D®
      3
    • Han D®, Han E®, DIN 41626, Ferrule, F-SMA, -ST
      1
    • Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224)
      3
    • Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227)
      1
    • Han E®
      4
    • Han E®: 0.14 ... 4 mm²
      1
    • Han E®: 0.5 ... 2.5 mm²
      1
    • Han E®: 0.5 ... 4 mm²
      2
    • Han-Yellock®
      3
    • Han-Yellock®: 0.14 ... 4 mm²
      1
    • Han-Yellock®: 0.5 ... 2.5 mm²
      1
    • Han-Yellock®: 0.5 ... 4 mm²
      1
    • Han® C
      2
    • Han® C: 1.5 ... 4 mm²
      3
    • Han® C: 4 ... 10 mm²
      3
    • Han® HsB: 1.5 ... 4 mm²
      1
    • Han® HsB: 4 ... 10 mm²
      1
    • Han® P
      1
    • Pressing force 120 kN
      2
    • Pressing force 60 kN
      2
    • Relay contacts
      1
    • SC, F-SMA F-ST
      2
    • Spare part
      7
    • acc. to DIN 41626
      2
    • for 120 kN tool
      11
    • for 500 bandoliered D-Sub high density contacts
      1
    • for 500 bandoliered standard contacts
      1
    • for 60 kN tool
      6
    • for D-Sub
      1
    • for FO connector (glass fibre)
      1
    • for FO connector (plastic fibre)
      1
    • for Han-Fast® Lock single contact
      4
    • for coaxial contact
      2
    • for crimp barrel and crimp flange
      1
    • for crimping tool 09 99 000 0888
      3
    • for following 1 mm POF contacts
      1
    • for optional testing
      1
    • for outer ferrule
      1
    • for part number 09 99 000 0377
      2
    • for part number 09 99 000 0509
      1
    • for part number 09 99 000 0990
      4
    • for power contacts
      1
    • for signal contacts
      1
    • for single D-Sub standard contacts
      2
    • for single stamped D-Sub contact
      1
    • for turned male and female contact
      2
    • for wire end ferrules
      2
    • incl. locator
      3
Show all filters
68 products (of 68)
1/3
New products - ascending
Han CRIMP TOOL WITH LOCATOR
Service crimping tool
Han CRIMP TOOL WITH LOCATOR
Article. No: 09 99 000 0021
Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 2.5 mm², Han-Yellock®: 0.5 ... 2.5 mm²
Conductor cross-section: 0.14 ... 2.5 mm²
Add to Wishlist
Han Hand Crimp Tool
Hand crimping tool
Han Hand Crimp Tool
Article. No: 09 99 000 0110
Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han-Yellock®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²
Conductor cross-section: 0.14 ... 4 mm²
Add to Wishlist
Double-Indent Crimping Tool
Crimping tool
Double-Indent Crimping Tool
Article. No: 09 99 000 0888
Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227), Han E®: 0.14 ... 4 mm², Han-Yellock®: 0.14 ... 4 mm², Han® C: 1.5 ... 4 mm²
Add to Wishlist
Crimping Tool Han C 4/6/10 mm2
Hand crimping tool
Crimping Tool Han C 4/6/10 mm2
Article. No: 09 99 000 0377
Han® C: 4 ... 10 mm²
Conductor cross-section: 4 ... 10 mm²
Add to Wishlist
DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.
Hand crimping tool
DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.
Article. No: 09 99 000 0501
for turned male and female contact, 4 indent crimp in acc. to MIL 22 520/2-01
Conductor cross-section: 0.09 ... 0.82 mm²
Add to Wishlist
Locator D-Sub turned standard contacts
Locator
Locator D-Sub turned standard contacts
Article. No: 09 99 000 0531
for single D-Sub standard contacts
Add to Wishlist
SUB-D CRIMP TOOL SINGLE CONTACT
Hand crimping tool
SUB-D CRIMP TOOL SINGLE CONTACT
Article. No: 09 99 000 0175
for single stamped D-Sub contact
Conductor cross-section: 0.09 ... 0.56 mm²
Add to Wishlist
Go / no-go gauge for 09990000888
Check gauge
Go / no-go gauge for 09990000888
Article. No: 09 99 000 0889
for crimping tool 09 99 000 0888, for optional testing
Add to Wishlist
D SUB HD SERVICE CRIMP TOOL
Hand crimping tool
D SUB HD SERVICE CRIMP TOOL
Article. No: 09 99 000 0596
Add to Wishlist
Crimptool Opening
Hand crimping tool
Crimptool Opening
Article. No: 09 99 000 0647
for crimp barrel and crimp flange
Add to Wishlist
Crimp die 16mm² for 60 kN tool
Crimp die
Crimp die 16mm² for 60 kN tool
Article. No: 09 99 000 0853
for 60 kN tool
Conductor cross-section: 16 mm²
Add to Wishlist
Crimp die 10mm² for 60 kN tool
Crimp die
Crimp die 10mm² for 60 kN tool
Article. No: 09 99 000 0852
for 60 kN tool
Conductor cross-section: 10 mm²
Add to Wishlist
Locator Set Han D/E/C, for Crimping tool
Locator
Locator Set Han D/E/C, for Crimping tool
Article. No: 09 99 000 0376
Spare part, Han D®, Han E®, Han® C
Add to Wishlist
Crimp die 25mm² for 60 kN tool
Crimp die
Crimp die 25mm² for 60 kN tool
Article. No: 09 99 000 0854
for 60 kN tool
Conductor cross-section: 25 mm²
Add to Wishlist
Crimp die 35mm² for 60 kN tool
Crimp die
Crimp die 35mm² for 60 kN tool
Article. No: 09 99 000 0855
for 60 kN tool
Conductor cross-section: 35 mm²
Add to Wishlist
Hand hydraulic crimping tool 60 kN
Hand hydraulic crimping tool
Hand hydraulic crimping tool 60 kN
Article. No: 09 99 000 0851
Pressing force 60 kN, Crimp die acc. to DIN 46235 with pressing width 9 mm
Conductor cross-section: 10 ... 70 mm²
Add to Wishlist
Locator f. crimping-tool 09990000888
Locator
Locator f. crimping-tool 09990000888
Article. No: 09 99 000 0887
Spare part, for crimping tool 09 99 000 0888
Add to Wishlist
DSUB HAND CRIMP TOOL POWER CONTACT
Hand crimping tool
DSUB HAND CRIMP TOOL POWER CONTACT
Article. No: 09 99 000 0509
for power contacts
Conductor cross-section: 0.5 ... 6 mm²
Add to Wishlist
Locator D-Sub für. 0501 (Gigabit Modul )
Locator
Locator D-Sub für. 0501 (Gigabit Modul )
Article. No: 09 99 000 0897
for single D-Sub standard contacts, 09 93 000 5576 + 09 93 000 5476
Add to Wishlist
DSUB HAND TOOLS
Hand crimping tool
DSUB HAND TOOLS
Article. No: 09 99 000 0169
for 500 bandoliered standard contacts
Conductor cross-section: 0.09 ... 0.56 mm²
Add to Wishlist
Han Yellock Locator for 0021 tool
Locator
Han Yellock Locator for 0021 tool
Article. No: 09 99 000 0343
Han-Yellock®
Add to Wishlist
Crimp die 50mm² for 60 kN tool
Crimp die
Crimp die 50mm² for 60 kN tool
Article. No: 09 99 000 0856
for 60 kN tool
Conductor cross-section: 50 mm²
Add to Wishlist
Battery Crimping Tool Set
Battery crimping tool set
Battery Crimping Tool Set
Article. No: 09 99 000 0990
Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²
Conductor cross-section: 0.14 ... 4 mm²
Add to Wishlist
Crimping tool for 1mm POF
Crimping tool
Crimping tool for 1mm POF
Article. No: 20 99 000 1035
for following 1 mm POF contacts, Han D®, Han E®, DIN 41626, Ferrule, F-SMA, -ST
Add to Wishlist
DIN-Tool Crimptool Coax M
Hand crimping tool
DIN-Tool Crimptool Coax M
Article. No: 09 99 000 0194
Crimp die included, for coaxial contact, acc. to DIN 41626
Add to Wishlist
Battery hydraulic crimping tool 60 kN
Battery hydraulic tool
Battery hydraulic crimping tool 60 kN
Article. No: 09 99 000 0850
Pressing force 60 kN, Crimp die acc. to DIN 46235 with pressing width 9 mm
Conductor cross-section: 10 ... 70 mm²
Add to Wishlist
Crimp die 25mm² for 120 kN tool
Crimp die
Crimp die 25mm² for 120 kN tool
Article. No: 09 99 000 0864
for 120 kN tool
Conductor cross-section: 25 mm²
Add to Wishlist
Crimp die 16mm² for 120 kN tool
Crimp die
Crimp die 16mm² for 120 kN tool
Article. No: 09 99 000 0863
for 120 kN tool
Conductor cross-section: 16 mm²
Add to Wishlist
Ferrule Crimp tool 10mm2
Hand crimping tool
Ferrule Crimp tool 10mm2
Article. No: 09 99 000 0374
for wire end ferrules
Conductor cross-section: 10 mm²
Add to Wishlist
Crimp die 70mm² for 60 kN tool
Crimp die
Crimp die 70mm² for 60 kN tool
Article. No: 09 99 000 0857
for 60 kN tool
Conductor cross-section: 70 mm²
Add to Wishlist
1 2 3
Compare
0
Sort by
Filters
0

Topics & Trends

HARTING Newsletter