Assembly tools | HARTING Technology Group

Type of tool

Select a value Reset filter
- Assembly tool
  
  26
- Battery hydraulic punch driver
  
  1
- Bench press
  
  1
- Bit ¼in as a spare part for guiding pins and bushes
  
  1
- Cable cutter
  
  1
- Cabling tool for termination
  
  7
- Dynamometric screwdriver
  
  7
- Han^® VDE Screw Driver Set
  
  1
- Hexagonal driver
  
  6
- Hexagonal head screwdriver
  
  1
- Hexagonal scewdriver
  
  1
- Hydraulic hand punch driver
  
  1
- Insertion / removal tools
  
  2
- Interchangeable blades
  
  1
- One click cleaner
  
  2
- Pliers
  
  1
- Polishing paper
  
  3
- Polishing tool
  
  6
- Polishing tool HP duplex
  
  1
- Punching units
  
  21
- Replacement-tip
  
  1
- Screw driver set Slimline
  
  1
- Spare part
  
  1
- Tool insert
  
  2
- Tool-kit
  
  2
- Torque set
  
  4
- Torque tool
  
  1
Description of the tool

Select a value Reset filter
- + adapter blade
  
  1
- + different bits
  
  1
- 1.25 mm
  
  1
- 2.5 mm
  
  1
- 40 A contact
  
  2
- 70 A contact
  
  1
- Adapter 3/8in
  
  3
- Bit ¼in
  
  2
- Bottom part
  
  1
- Cable gland
  
  1
- DIN 41612
  
  6
- F-ST
  
  1
- Ferrule
  
  1
- For SP1 and SP2
  
  1
- HARTING PushPull (V4) Power
  
  1
- Han D^®
  
  1
- Han E^®
  
  1
- Han-Modular^®
  
  1
- Han-Yellock^®
  
  1
- Han^® 3 A
  
  1
- Han^® 3 A Push-In
  
  1
- Han^® F+B
  
  1
- Han^® Q 5/0
  
  1
- Insertion tool for coding pin
  
  1
- Insertion tool for single male press-in contacts
  
  2
- Insolated blade for slim assembly
  
  1
- Only measuring device
  
  1
- POF cable 2.2 mm diameter
  
  1
- Punching pressure: 60 kN
  
  2
- SC
  
  1
- SC POF
  
  1
- Small cross-section
  
  1
- Staf^®
  
  1
- Suitable for D-Sub
  
  1
- Suitable for D-Sub and SEK
  
  2
- Suitable for SEK DIP
  
  1
- Suitable for SEK LP, 2 rows
  
  1
- Suitable for SEK LP, 4 rows
  
  1
- Suitable for SEK female
  
  1
- Suitable for har-flex^® female
  
  1
- The standard set
  
  1
- Tightening torque: 0.5 ... 1.2 Nm
  
  1
- Tightening torque: 0.5 Nm
  
  1
- Tightening torque: 1 ... 5 Nm
  
  1
- Tightening torque: 5 ... 14 Nm
  
  1
- To produce panel cut outs for connectors
  
  2
- To tighten the har-port fixing nut
  
  1
- Top part
  
  1
- Variable length of blade
  
  1
- With ball end
  
  1
- With grip
  
  2
- With measuring device
  
  1
- har-bus^® HM
  
  1
- for 7/8"
  
  1
- for D-Sub hoods (50 contacts)
  
  1
- for D-Sub hoods (9-37 contacts)
  
  1
- for GI 1 μ-grain size
  
  1
- for GI 9 μ-grain size
  
  1
- for HARTING RJ Industrial^® Gigalink Cat. 6_A connectors
  
  1
- for HARTING RJ Industrial^® Gigalink connectors
  
  1
- for HARTING RJ Industrial^® PN Compact connector set
  
  1
- for HARTING ix Industrial^® IP20 PushPull and Mini PushPull ix Industrial^® for positioning the cable guides on the IDC unit. Required for the assembly of AWG 22 variants.
  
  1
- for HARTING ix Industrial^® and HARTING Mini PushPull ix Industrial^® to assemble the single wire to the IDC and the cable strain relief crimping
  
  1
- for HARTING ix Industrial^® to assemble the single wire to the IDC and the cable strain relief crimping
  
  2
- for HARTING screw contacts and fixing screws
  
  1
- for Han^® ES insert
  
  1
- for High Current axial screw contact
  
  1
- for InduCom hoods with hexagonal screws
  
  1
- for M12 Power
  
  1
- for M12 Slim Design
  
  1
- for M12-L
  
  1
- for M12-S
  
  1
- for M8
  
  2
- for POF grain size 1000
  
  1
- for har-bus^® HM coding keys
  
  1
- for har-flex^® Board IDC
  
  1
- for an easy insertion of male and female contacts into the insulation body
  
  1
- for angled variant
  
  1
- for assembly of D-Sub hoods
  
  2
- for axial screw
  
  7
- for breaking out the coding area
  
  1
- for contacts BC / har-bus^® 64
  
  1
- for contacts FC 1, FC 2 and FC 3
  
  1
- for crimp contacts
  
  2
- for discrete wire termination
  
  8
- for flange
  
  3
- for guiding pins and bushes
  
  1
- for hydraulic punch drivers
  
  21
- for ix Industrial^® assembly tool
  
  2
- for part number 09 99 000 0615
  
  1
- for part number 09 99 000 0847
  
  1
- for power contact
  
  1
- for preLink^® termination block
  
  1
- for single D-Sub high density contacts
  
  1
- for single D-Sub standard contacts
  
  1
- for single modules
  
  1
- for straight variant
  
  1
- for termination of insulation displacement connectors
  
  1
- incl. 1/4in Bit
  
  1
- incl. reversing blade (AF 2.0 + AF 2.5 + PH2)
  
  1