kann gelöscht werden | HARTING Technology Group

Han^® S

Fulfils requirements according to the newest standards of the battery storage market
Finger safe male and female contacts
Housing 360° rotatable even when mounted

Han^® DDD

High density of contacts
for requirements up to 250 V / 10 A
Time saving rapid termination by use of crimping contacts
Gold and silver contacts available

Han^® K 6/6

Combination of signal and power in one connector
Crimp termination for power and signal area
16 coding options
+ 6 additional signal contacts

Han^® 200 A module

Power module for big cross-sections up to 70 mm²
High rated voltage up to 1300 V
IP20 protection for female and male module (by using male contacts with protective cap)
Compatible to the Han^® 300 A module

Han^® 300 A module

Power module for big wire gauges up to 120 mm²
High rated voltage up to 1300 V
IP20 protection for female and male module (by using male contacts with protective cap)
Compatible to the Han^® 200 A crimp module

Han DD^® double module

36 Han D^® contacts up to 400 V
Suitable for transmitting power (10 A) and signals in one module
e.g. for three phase AC motors including feedback for all six axes of a robot

Han^® Shielded module basic

EMC compatible connection of the cable screen with a large-area shielding plate
High contact density up to 27 shielded contacts
Applicable as cost effective shielding connection

Han^® Shielded power module

Interface for typical motor applications such as frequency-controlled drives
4 power contacts (pin 4 is pre-leading to be used as a PE)
2 signal contacts for temperature monitoring or breaks
EMC compatible connection of the cable screen with a large-area shielding plate

Han-Smart<sup>®</sup> ID Profinet module

Han-Smart^® ID Profinet module

Module for identifying industrial components
Profinet I/O communication protocol conformance class B
SNMP enabled (V1, V2C)

Han-Smart^® HEM module

Continuously voltage and current measurement
Data interval 1 second
Communication via MODBus TCP or RTU
Analysing up to 25^th harmonics per phase
Power factor, frequency, active-, reactive-, apparent power calculation

Han^® HsB Crimp termination

Suitable for power supply applications
Crimp termination

Han-Port^®

Application with socket and data connector (RJ45, USB)
Compact design for easy installation in single or double frame
Suitable for data module in HIFF-size
Screening shield to optimise EMC protection

Han^® F+B

"Easy-to-Clean" design
Certified by Ecolab
IP6K9K acc. to ISO 20653
Inserts for Data / Signal / Power / Hybrid
Han^® 3 A inserts adaptable

Han^® EMC/B hoods/housings

Hoods/Housings for higher EMC requirements
Continuous shield connection using conductive surface
Metal hoods / housings with high shielding efficiency
Field of application: for sensitive interconnections that have to be shielded against electrical, magnetic or electro-magnetic interferences
Locking levers: Han-Easy Lock^®

Han^® HPR rear mounting

Hoods/housings for harsh outdoor environments

Han^® HPR Enlarged

Option of connecting a cable for a functional earth externally
Hinged frames with additional PE connection for 6 respectively 8 Han-Modular^® single modules

Han^® HPR EasyCon

Ha-VIS eCon 2000 Advanced

Unmanaged Plug & Play Gigabit Switch
Robust and miniaturised Ethernet interface ix Industrial^®
Flat design for DIN rail or wall mounting
Optimised for imaging processes and other data intensive applications
Full Gigabit Ethernet Non Blocking switch architecture according to IEEE 802.3

HARTING T1 Industrial system cables

HARTING ix Industrial<sup>®</sup> cable assemblies

HARTING ix Industrial^® cable assemblies

HARTING Mini PushPull ix Industrial<sup>®</sup> cable assemblies

HARTING Mini PushPull ix Industrial^® cable assemblies

Robust industrial design
360° shielding
5000 mating cycles

HARTING PushPull USB cable assemblies

HARTING VarioBoot RJ45 cable assemblies

Fiber optic rotary joint

HARTING DualBoot RJ45 cable assemblies

HARTING Industrial drag chain cable SF/UTP Cat. 6<sub>A</sub> PUR

HARTING Industrial drag chain cable SF/UTP Cat. 6_A PUR

Suitable for generic cabling
For drag chain applications
Highly EMC resistant

DIN 41612, Type G

Up to 64 contacts
6 A per contact

Ha-VIS RFID Transponder

Robust systems for industrial and railway

Dust protection cover for Han-Modular<sup>®</sup> docking frames

Dust protection cover for Han-Modular^® docking frames

Thermoplastic

Han<sup>®</sup> 3 A Screw mounted housings

Han^® 3 A Screw mounted housings

Size 3 A

Han<sup>®</sup> 1A Versatile compact connector series

Han^® 1A Versatile compact connector series

Flexible connector system
Compact design saves space
"click and mate" assembly concept

Ha-VIS eCon 3000

Slim construction size

D-Sub Standard

9 to 50 poles
Thermoplastic or metal hoods/housings
Top/side entry
IP20 and IP65 / IP67
UL listed

Standard hoods/housings Han<sup>®</sup> B Panel feed through housing

Standard hoods/housings Han^® B Panel feed through housing

Standard hoods/housings for industrial connectors

RJ45 / M12

8-wire system cables (X-coded) for Gigabit Ethernet
4-wire system cable (D-coded) for Fast Ethernet
IP20 and IP65 / IP67
PVC, PUR
Overmoulded

D-Sub InduCom hoods

360° shielding
Low transfer impedance, best EMC behaviour
For D-Sub Standard, High Density and Mixed cable connectors

Accessories

Protection covers

Cable connector

IDC connectors
With strain relief
Locking levers
Flat cable

System cables

Han^® TC 350 PE

Han^® HPR EasyCon

Easy assembly
Excellent EMC characteristics

har-port

Compact and well-shaped charger in a timeless attractive design
Simple mounting
Robust industrial design
Practical accessories

Han^® HC Modular

Crimp contacts
Screw contacts
Frame

Hoods/Housings

Shell housing
360° shielding
Vibration and shock resistant

6-row connectors

(complementary)
72 or 144 contacts

Hoods/Housings

Hoods/housings for industrial applications

Particularly robust for industrial applications
Suitable for applications according to protection class II

HARTING Cabinet Outlet RJ45

Simple mounting
Dust protection covers
Port identification
Angled output

har-port

Service interfaces
System cables

HARTING PushPull

Connector set
for device side
Hoods/Housings
Accessories

PushPull Mini DisplayPort

20-pin
DisplayPort 1.1
DisplayPort 1.2

FO cable

Single- and multi-mode glass fibre cables
2 and 4 fibres
IP20 and IP65 / IP67
Overmoulded

har-mik^®

14 to 100 poles
Contact spacing 1.27 mm
Bellows and Pin&Socket variants
Thermoplastic or metal hoods/housings

7/8"

3-pin (2+PE), 4-pin, 5-pin (4+PE)
Power applications
IP67
PVC, PUR

Han^® M23 Contacts

Crimp contacts

Han^® Hoods and Housings

Hoods/Housings
Protection covers

Fiber optic rotary joint

Designed to connect a static and continuously rotating part by using a single optical fiber
Wear and maintenance free
Reduce of weight compared to copper cabling
Electromagnetic immunity
Lifetime: 500 million revolutions

Han<sup>®</sup> Full High Density module

Han^® Full High Density module

Suitable for standard D-Sub crimp contacts
44 % higher density

M12 Slim Design <i>HARAX</i><sup>®</sup> connection technology

M12 Slim Design HARAX^® connection technology

Robust design
Simple mounting
Vibration and shock resistant

Modules with Han-Quick Lock<sup>®</sup> Termination

Modules with Han-Quick Lock^® Termination

System cables

M12

Device side

FO cable

Single- and multi-mode glass fibre cables
Full breakout cable
2 and 4 fibres
Particularly robust for industrial and outdoor applications

Han-Modular^® Guide element

for Han-Modular^® hinged frames

RJ45 / M12

8-wire system cables (X-coded) for Gigabit Ethernet
4-wire system cable (D-coded) for Fast Ethernet
IP20 and IP65 / IP67
PVC, PUR

HMC Modules for 10,000 mating cycles

Modules

PushPull Hybrid

Combination of data and power
Half the number of interfaces
Ethernet Cat. 5
Power supply: 48 V / 5 A

Crimp contacts

Han-Eco^® B Hoods/Housings

Han-Eco^® "click and mate" assembly concept
Can be mounted to back of electrical cabinet
Optimum protection against environmental influences

Hoods/housings for outdoor applications

Light Hoods/housings of high-performance plastic
Resistance to corrosion and ozone: for outdoor use

#x20;

M23 Contacts

Crimp contacts

Hoods/Housings

RJ45

8-wire system cables for Gigabit Ethernet
4-wire system cable for Fast Ethernet
IP20 and IP65 / IP67
PVC, PUR, LSHF (FRNC)
Overmoulded

QSFP

acc. to SFF 8661
Data transmission up to 10 Gbit/s
AWG 30-24
High speed twisted pair cable
Moulded PCB

Han^® M

Bulkhead mounted housings
IP66
IP67

Hoods/Housings

Han-Eco<sup>®</sup> punch units for hydraulic punch drivers

Han-Eco^® punch units for hydraulic punch drivers

Protection cover

Shielded modules

Han<sup>®</sup> HP Hoods/housings for harsh outdoor environments

Han^® HP Hoods/housings for harsh outdoor environments

Screw lock made of high-quality stainless steel
IP68 / IP69 / IPX9K
Compatible with Han-Modular^® components
Low construction for space saving

Modules with Screw Termination

Device side

Adapter
PCB jack

Accessories

Ha-VIS RFID Antennas

Robust antennas for industrial and railway
Circular UHF antenna with wide range
High temperature version available
Railway version (under train installation) available

Ha-VIS RFID Reader

Robust systems for industrial and railway

Hoods/Housings

PushPull Signal

10-pin or 20-pin
for transmitting analogue, low-voltage signals and bus signals
IP65 / IP67
Shielded

Han^® ES Press HMC

Quick connection requires no tools
Han^® ES Press plug-in jumpers
for High Mating Cycles

Han^® PushPull Power L 4/0

har-flex^®

Fully automatic processing
Many application possibilities
Robust design
Between 6 and 80 poles in even numbered positions
Rated current: 1.5 A @ 80 °C (variant with 26 contacts)

Data

Straight male connectors

Press-in termination
Guide pin

Han-Power^® T

Energy distributor
48 V / 12 A
With 3x HARTING PushPull Power
plug-and-play

Han^® Megabit HMC Modules

HARTING RJ Industrial^®

Very robust full metal housing
Wide range IDC for solid and stranded wires from AWG 26 to AWG 22
No side cutter needed anymore – integrated cutting blades behind the IDC contacts cut the wires to the correct length
Very robust and patent pending cable fixing
Suitable for all PoE versions

Han^® M23 Hoods/Housings

All-purpose circular connector
Metal hoods / housings
Shielded

Industrial connectors Han^®

Particularly robust for industrial and outdoor applications
Data transmission via copper or FO
for different numbers of poles
Data transmission and power supply is possible in one cable

PushPull gender changer

With PushPull

Ha-VIS RFID Transponder

Robust systems for industrial and railway

Han<sup>®</sup> F+B Hoods/Housings for food+beverage industry

Han^® F+B Hoods/Housings for food+beverage industry

"Easy-to-Clean" design
Certified by Ecolab
High degree of protection IP69 / IPX9K

Han-Modular<sup>®</sup> Pneumatic contacts

Han-Modular^® Pneumatic contacts

for the transmission of compressed air
Female contacts with / without shut-off

Circular connectors M8

D-coding

Angled female connectors

Press-in termination
Solder termination
Coding

har-flex^®

THR solder-in posts
for reflow soldering

Modules with other termination techniques

PCB connectors

Available in multiple termination techniques
Straight and angled versions
Automatic mounting

Protection covers

32 A
32 B
With fixing cord
Thermoplastic

Cable connector

IDC connectors
With strain relief
Locking levers
Flat cable

M23 Contacts

Crimp contacts

Han^® Pneumatic module

SEK

6 to 64 poles
Contact spacing 2.54 mm
UL listed
With strain relief
Polarisation key

M23 Hoods/Housings

Metal hoods / housings
Shielded

Device side

Ha-VIS RFID Solution Packages

4Logistics
4MoldTracking
4Rail
4SMT

Han^® HP Direct

Protection covers
With fixing cord

Han^® Guiding module

Centring function with a very large inlet cone of +/- 4 mm
Significantly better handling compared to conventional guide pins/sockets
Ideal add-on when dealing with many mating cycles or inaccessible connectors

Crimping tool Han-Fast^® Lock

M12 Slim Design With crimp flange

Robust design
IP65 / IP67
Vibration and shock resistant
Crimp termination

Han<sup>®</sup> HC Individual for higher currents

Han^® HC Individual for higher currents

Variable high-current interface
Stackable due to modular design
2000 V / 350 A
Suitable for HC 350 crimp contacts

Han<sup>®</sup> HP Direct for direct electrical cabinet installation

Han^® HP Direct for direct electrical cabinet installation

Screw lock made of high-quality stainless steel
Particularly robust for industrial and outdoor applications

Han<sup>®</sup> M23 All-purpose circular connector

Han^® M23 All-purpose circular connector

Metal hoods / housings
Shielded

PushPull cable connectors

With PushPull

Modules with Axial Screw Termination

HMC Modules for 10,000 mating cycles

M12

All-purpose use
for cable and device sides
Data transmission up to 10 Gbit/s

M12 Transformer

Vibration and shock resistant
D-coding
X-coding
Reflow soldering termination (SMT)

Han-Modular^®

Hinged frame
Modules
Docking frame

Device side

Ethernet switches Ha-VIS eCon

for assembly on DIN rails in electrical cabinets
plug-and-play
Power over Ethernet (PoE)

HARTING T1 Industrial

Internationally standardised mating face acc. to IEC 63171-6 (former IEC 61076-3-125)
For the construction of future-proof and standardised Single Pair Ethernet (SPE) communication networks with standardised cabling according to ISO / IEC 11801 and TIA 42
Designed for industrial applications up to M₃I₃C₃E₃ environmental conditions
Meets all IEEE 802.3 requirements for SPE
Robust industrial design with 360 ° shielding, locking lever protection and high mating cycles

Expanded beam

Shock protected by rubber grip ring, dust cap and boot
Hermaphroditic design - always the correct mating face where needed
Easy link extension by connecting multiple, identical cable assemblies
Robust design

M23 All-purpose circular connector

Good EMC characteristics
Data
Signal
Power

Han^® PushPull (V14)

HARTING PushPull (V4) technology
360° shielding
Field assembly
No side cutter needed anymore – integrated cutting blades behind the IDC contacts cut the wires to the correct length
Wide range IDC for solid and stranded wires from AWG 26 to AWG 22

HARTING sea cable

Especially suitable for data cabling on and below deck of civil ships as well as other offshore applications
Flame retardant, halogen free and RoHS compliant
Oil and UV resistant

M8

D-Sub High Density

15 to 78 poles
Thermoplastic or metal hoods/housings
Top/side entry
IP20 and IP65 / IP67
UL listed

PCB connectors

Two-part PCB terminal
In combination with a base strip

Han-Brid^® Quintax 3 A

Possibility to terminate shielded four/eight wires conductors (2 pair STP)
Possibility to terminate Coax cable with large diameter
Suitable for all 4-wire bus systems
snap-fit

LT 2.0 series

Large working memory
"On metal" use is possible
Resistant to chemicals

Han<sup>®</sup> Ex for explosion hazardous enviroments

Han^® Ex for explosion hazardous enviroments

Inserts
Hoods/Housings

Ha-VIS eCon 2000

Low construction type

Service interfaces

Hoods/housings for outdoor applications

Resistance to corrosion and ozone: for outdoor use

Cable connector

Expanded beam

Shock protected by rubber grip ring, dust cap and boot
Hermaphroditic design - always the correct mating face where needed
Easy link extension by connecting multiple, identical cable assemblies
Robust design

Han^® M23 All-purpose circular connector

Data
Signal
Power

PushPull

Data transmission up to 10 Gbit/s
Double-sided IP65 / IP67 protection
Simple handling by HARTING PushPull (V4)

Power up to 200Amp

Accessories

har-mik^®

14 to 100 poles
Contact spacing 1.27 mm
Bellows and Pin&Socket variants
Thermoplastic or metal hoods/housings

Han^® Q 5/0

32 coding options without loss of contacts
Crimp termination
Mating compatible to the standard Han^® Q 5/0 insert

Power 40Amp

Crimp contacts

PushPull XS SFP

Hoods/Housings
Inserts
System cables

Cable

High performance bulk cables
Ethernet and EtherRail®

Modules

M23 Power

Good EMC characteristics
Signal
Power
Crimp termination

Han^® 24 HPR EasyCon short

Devided hood/housing ensures a user-friendly assembly process and simple inspection of the cable and screen connections on the "open system"

Han-Modular^® Flexbox

Fast, easy and secure assembly
Flexible building block system
Suitable for Han-Modular^® modules

Modules

Plug-in jumpers

Power

Han^® F+B

"Easy-to-Clean" design
Certified by Ecolab
Inserts for Data / Signal / Power / Hybrid
Han^® 3 A inserts adaptable
IP6K9K acc. to ISO 20653

Distribution boxes / sensor actuator boxes

Passive sensor actuator boxes
Ports: M8 or M12
Number of ports: 4, 8 or 10
Connection technology: pre-assembled cable, pluggable cable, M23, M16, M12
IP67 or IP68

LTE (2G/3G/4G)

PushPull Mini DisplayPort

DisplayPort 1.1
DisplayPort 1.2
Assembled and tested system cables

Crimp contacts

har-flex^®

Miniature connector
Contact spacing 1.27 mm
2 rows
6 to 100 contacts
Particularly robust for industrial applications

Accessories

Protection covers
Crimping tool

Distribution boxes

Distribution boxes / sensor actuator boxes

PCB adapter

In the Han^® 40 EEE crimp insert

Hoods/Housings

M12 PushPull Angled

Robust design
IP65 / IP67
Crimp termination
Vibration and shock resistant

Accessories

Protection covers

Ha-VIS RFID Antennas

Robust antennas for industrial and railway

Mini Coax

6-pin or 8-pin
Data transmission up to 2.5 Gbit/s
IP65 / IP67
Overmoulded
Shielded

Current transformer

Current transformer for measurement and tests
Best accuracy classes
Suitable for invoicing purposes
Can be calibrated

HARTING MICA

HARTING MICA Wireless
HARTING MICA 2
Starter kit

Screw contacts

Circular connectors

M8
M12
Panel feed through
Accessories
Tools

Han^® ID CAN module

DIN 41612

Contact spacing 2.54 mm
acc. to IEC 60603-2

Module mit Cage Clamp Termination

PT series

High degree of protection IP69 / IPX9K
"On metal" use is possible
Resistant to chemicals
Can be used in autoclave

Han^® PushPull Power L

Protection cover

Cable assemblies

Han^® HC Modular 250 Enlarged

Han^® M23 All-purpose circular connector

Good EMC characteristics
Data
Signal
Power

Cable connector

Han^® TC 250

Accessories

Crimp flange
Crimp ferrule

Copper cable

Profile-specific copper cables for data transmission
Multi-wire combinations of individual wires
Various insulating materials used for the sheath
Industrial, outdoor and railway applications
UL listed

Han-Port^® combi inserts

Sockets

M12

3 to 12 poles
A-, B-, D-, L- and X-coded
IP65 / IP67
PVC, PUR
Overmoulded

SFP

acc. to SFF 8432
Data transmission up to 40 Gbit/s
AWG 30-24
High speed twisted pair cable
Moulded PCB

Sliding frame

R 23 Hoods/housings for R 23 inserts

All-purpose circular connector
Metal hoods / housings
Shielded

Hoods/Housings

D-Sub InduCom hoods

360° shielding
Low transfer impedance, best EMC behaviour
For cable diameter 5.0 up to 14.0 mm

Inserts

Accessories

Strain reliefs

M23 Inserts

Data
Signal
Power

Han-Smart<sup>®</sup> The intelligent connector

Han-Smart^® The intelligent connector

Data processing inside the connector
Miniaturisation
for Industry 4.0

Han^® Gigabit module

Cat. 7_A

M12 Power L

L-coding
PCB adapter
Housing
Cable connector

Han^® K 32/55

Inserts
Crimp contacts

PCB connectors

Hoods/housings for industrial applications

Light Hoods/housings of high-performance plastic
Particularly robust for industrial applications

Han^® HPR

Hoods/Housings
Frame
Protection covers
Accessories

WLAN

Current sensors

Open loop
Industrial version

Han DD^® Inserts

28-pin
40-pin

PCB connectors

IT series

Very compact construction type
"On metal" use is possible

preLink^® M12

Screw mounted housings
PCB jack

#x20;

ETB series

Wireless connection of sensors
RFID data and sensor value transmission
"On metal" use is possible
Maintenance-free passive technology

M23 Inserts

Up to 19 contacts
Crimp termination
Solder termination
PCB solder termination

Accessories

Protection covers
Crimping tool

Modules with Crimp Termination

Han-Modular^® Switch US4

Inserts

Signal

Cable assemblies

6 to 100 poles
Contact spacing 1.27 mm
Strain relief is available

High Voltage

Accessories

M23 Hoods/Housings

Metal hoods / housings
Shielded

Han^® PE module

Han^® M23 Inserts

Crimp termination
Solder termination
PCB solder termination

Tools

MICA Energy

High degree of protection IP67
Modbus RTU and S0 ports
Modbus TCP over Ethernet
Process or visualize directly on the device
Forward relevant information

HARTING ix Industrial^®

Compact design saves space
Robust design
Data transmission up to 10 Gbit/s
for High Mating Cycles
Vibration and shock resistant

RJ45 Female module

Han^® CGM Cable glands

Metal
Thermoplastic
IP68 / IP69 / IPX9K

Crimp contacts

Han^® K 6/12

Combination of signal and power in one connector
Crimp termination for power and signal area
16 coding options
+ 12 additional signal contacts

Han^® ES Press

Inserts
Plug-in jumpers

PCB adapter and housings

Variants with PushPull
SMT/THR versions

Han<sup>®</sup> HP Hoods/housings for rough environments

Han^® HP Hoods/housings for rough environments

Robust housing
Compact design saves space
Excellent EMC characteristics
Screw lock made of high-quality stainless steel
Internal seal

Tools

Han-Eco^® punch units
Crimping tool

Modules

Han<sup>®</sup> High density shielded module

Han^® High density shielded module

360° shielding
High packing density

USB

Data transmission up to 5 Gbit/s
According to USB 2.0 / USB 3.0 specification

Han<sup>®</sup> 1A Small connector for industrial applications

Han^® 1A Small connector for industrial applications

All-purpose use
Light Hoods/housings of high-performance plastic
"click and mate" assembly concept
Scalable IP-protection from IP20 to IP65

Ha-VIS RFID RF-R300 Reader

2 external antenna connections
Ideal for medium-range distances
Efficient use with PoE option
Ideal for light industrial applications

Power up to 200Amp

Hybrid

Data transmission and power supply in one cable
Data transmission via copper or FO
for different numbers of poles
IP65 / IP67
Operating voltage up to 300 V AC/DC

Inserts

Ha-VIS eCon 3000 Media converter

Slim construction size
for vertical installations in electrical cabinets
plug-and-play
Power over Ethernet (PoE)

Hybrid cable

Data transmission and power supply in one cable
Data transmission via copper or FO
Minimal installation effort
Particularly robust for industrial and outdoor applications
for different numbers of poles

Han^® K 9/9/18 Crimp

Han^® C power contacts
Han E^® power contacts
Han D^® signal contacts
Crimp termination for power and signal area

Han<sup>®</sup> F+B for food+beverage industry

Han^® F+B for food+beverage industry

Combination of signal and power in one connector
Power range up to 500 V / 16 A
Control range up to 250 V / 10 A

Steel ID

Exceptionally robust design
Ideal for labelling crane chains
Transponder embedded in metal

Han-Max^®

Data transmission up to 10 Gbit/s
Quick connection requires no tools

Docking frame

Metal

Hoods M25

Han A^®
Han^® M
Han^® EMC

Ha-VIS RFID RF-R400 Reader

applicable in rough, metal-containing industrial environments
robust aluminium housing
high transponder population
very fast multiplexing speed
robust M12 and M8 connectors

for SMT reflow soldering

M12 Slim Design

Crimp termination
Shielded

Ha-VIS RFID Middleware App Appliance

Easy integration of UHF / RAIN RFID in every project
No programming effort
Reliable standardised solution
Reading and writing tag information
Various filter and aggregation options

M8

3-pin or 4-pin
Signal Transmission
IP65 / IP67
PVC, PUR
Overmoulded

R 23 All-purpose circular connector

250 V / 10 A
Up to 19 contacts
Available in multiple termination techniques
Suitable for hoods/housings of series R 23

Shielded modules

<i>har</i>-flex<b>i</b>c<b>o</b>n<sup>®</sup>

har-flexicon^®

for SMT reflow soldering

Han^® HPR Frame

for Han-Modular^®
in the Han^® 24 HPR EasyCon
in the Han^® 24 HPR enlarged

har-flex^®

Miniature connector
Contact spacing 1.27 mm
2 rows
6 to 100 contacts
Particularly robust for industrial applications

Han-Modular^® Twin

Accessories

Energy distributor Han-Power<sup>®</sup> T with 5x Han<sup>®</sup> Q 4/2

Energy distributor Han-Power^® T with 5x Han^® Q 4/2

Overload and short-circuit protection measures are the responsibility of the user (electrician).
Maximum let-through energy of the short-circuit protection device (I²t) shall not exceed 211600 A²s.
Assembly and installation must be carried out by a qualified electrician.