This contact insert is an unenclosed connector according to IEC 61984. In this case protection against electric shock must be provided by the installation methods of the user.
Contact inserts must not be coupled or decoupled under electrical load.
Connector must not be powered-up in the unmated condition.
Please order crimp contacts separately.
Charakterystyka techniczna
Przekrój przewodu (AWG)
AWG 26 ... AWG 18
Rzędy kontaktów
1
Rozstaw kontaktów (strona przyłączeniowa)
2.54 mm
Rozstaw kontaktów (strona łączeniowa)
2.54 mm
Prąd znamionowy
11 A
Prąd znamionowy
The current-carrying capacity depends significantly on the printed circuit board used, the conductor cross-section used and the specific installation situation.