The described connectors are connectors without breaking capacity (COC) according to IEC 61984 and must not be coupled or decoupled under electrical load during use as intended!
Only cables with protection class 2 shall be used!
The axial screw termination is suitable for fine stranded wires according to EN 60228 class 5. Using alternative cables have to be tested separately.
For the assembly within bulkhead mounted housings the described installation conditions of the data and type sheets must be respected.
Only the housings linked in the eShop shall be used!
For the connection of the conductor into the axial screw contact use hex key with AF 4.
Технические характеристики
Поперечное сечение проводника
16 ... 25 mm²
Поперечное сечение провода [AWG]
AWG 6 ... AWG 4
Номинальный ток
100 A
Номинальное напряжение
400 V
Номинальное импульсное напряжение
6 kV
Степень загрязнения
3
Сопротивление изоляции
>1010 Ω
Сопротивление контактов
≤ 0,3 mΩ
Длина снятия изоляции
10 mm
Момент затяжки
6 ... 7 Nm
Предельная температура
-40 ... +125 °C
Циклы стыковки
≥ 500
Свойства материала
Материал (контактная вставка)
Policarbonato (PC)
Poliamida (PA)
Цвет (контактная вставка)
RAL 7032 (gris guijarro)
Материал (контакты)
Aleación de cobre
Поверхность (контакты)
Chapado en plata
Группа горючести материала согласно UL 94
V-0
RoHS
conforme con exención
Исключения из RoHS
6.c): Aleación de cobre que contenga hasta un 4 % de su peso en plomo.
Состояние ВЭА
conforme con exención
China RoHS
50
Жидкости из приложения XVII к предписанию REACH
No incluido
Жидкости из приложения XIV к предписанию REACH
No incluido