Cleaning: For cleaning with high pressure lances, a cleaning distance > 30 cm is recommended in order to avoid mechanical damage to the connector’s exterior parts.
Strain relief:A suitable strain relief is required to enable the F+B connectorto resist the stress caused e.g. by the daily cleaning of the machinery. DIN VDE 0100-520: 2013-06 defines the stress relief for a connector depending on the outer diameter of the cable.
Technical characteristics
Tightening torque
1 Nm Fixing screws M3
Limiting temperature
-40 ... +125 °C
Note on the limiting temperature
For use as a connector according to IEC 61984.
Mating cycles
≥ 500
Degree of protection acc. to IEC 60529
IP67 locked condition
IP6K9K acc. to ISO 20653
Material properties
Material (hood/housing)
Polypropylen
Roughness of the surface
≤ 1,12 µm
Colour (hood/housing)
Black
Material (seal)
EPDM
Silicone
Colour (seal)
Blue
Material flammability class acc. to UL 94
HB
RoHS
compliant
ELV status
normes
China RoHS
e
REACH Annex XVII substances
Non contenu
REACH ANNEX XIV substances
Non contenu
REACH SVHC substances
Non contenu
EG1935/2004
normes
California Proposition 65 substances
Not contained