Resumen de caracterísiticas
Inserts
Crimp termination
Female
Polyamide (PA)
RAL 9005 (jet black)
Rated current: 4 A
Size: 1 A
Contacts: 4 + shielding
Conductor cross-section: 0.13 ... 0.82 mm²
Snap-in latches
Product Details
Identification
- Category Inserts
- Series Han® 1A
Version
- Termination method Crimp termination
- Gender Female
- Size 1 A
- Shielding With cable tie
- Number of contacts 4
- further contacts + shielding
- Locking type Snap-in latches
-
Details
Please order crimp contacts separately.Order separately the hoods/housings for an IP65 performance.Contact insert not compatible with 09 10 000 0800 (bulkhead mounted housing, angled)
-
Details
A Han® 1A configuration that only consists of inserts (with or without strain relief, 09 10 000 5300) is an unenclosed connector according to IEC 61984. In this case protection against electric shock must be provided by the installation methods of the user.Contact inserts must not be coupled or decoupled under electrical load.Contact inserts must not be powered-up in the un-mated condition.
Technical characteristics
- Conductor cross-section 0.13 ... 0.82 mm²
- Rated current 4 A
-
Rated voltage
48 V AC60 V DC
- Rated impulse voltage 1.5 kV
- Pollution degree 3
- Transmission characteristics Cat. 5 Class D up to 100 MHz
-
Data rate
10 Mbit/s 100 Mbit/s
- Insulation resistance >108 Ω
- Limiting temperature -30 ... +90 °C
- Mating cycles ≥ 100
- Degree of protection acc. to IEC 60529 IP20
Material properties
- Material (insert) Polyamide (PA)
- Colour (insert) RAL 9005 (jet black)
- Material (seal) NBR
- Colour (seal) Black
- Material flammability class acc. to UL 94 V-0
- RoHS compliant
- ELV status compliant
- China RoHS e
- REACH Annex XVII substances Not contained
- REACH ANNEX XIV substances Not contained
- REACH SVHC substances Not contained
- California Proposition 65 substances Not contained
- Fire protection on railway vehicles EN 45545-2 (2020-08)
-
Requirement set with Hazard Levels
R22 (HL 1-3)R23 (HL 1-3)
Specifications and approvals
-
Specifications
EN 45545-2 R22: HL1, HL2, HL3EN 45545-2 R23: HL1, HL2, HL3EN 45545-2 R24: HL1, HL2, HL3IEC 61373 Category 1 Class BEN 60664-1IEC 61984
- Approvals DNV GL
-
UL / CSA
Please contact your local HARTING subsidiary for further information.
Commercial data
- Packaging size 1
- Net weight 30 g
- Country of origin Romania
- European customs tariff number 85366990
- eCl@ss 27440205 Contact insert for industrial connectors
Descargas
Download Package
0
Comparar
Comparar productos
Comparar
