Image is for illustration purposes only. Please refer to product description.
HPP V4 / V14 Signal PFT insert 10-pole
Connector, Inserts, Crimp termination, Rated current: 5 A, Contacts: 10, Conductor cross-section: 0.13 ... 0.82 mm², Copper alloy, Sn over Ni, Termination side, Au over Pd/Ni over Ni, Mating side
Part number: 09 45 545 9010
Go to:
- Category Connectors
- Series HARTING PushPull (V4)
- Identification Signal
- Element Inserts
- Specification for panel feed through HIFF
- Termination method Crimp termination
- Shielding Fully shielded, 360° shielding contact
- Number of contacts 10
- Pack contents incl. male insert
- Conductor cross-section 0.13 ... 0.82 mm²
- Conductor cross-section AWG 26 ... AWG 18
- Wire outer diameter ≤ 2.1 mm
-
Contact spacing (termination side)
2.4 mm3 mm
-
Contact spacing (mating side)
2.4 mm3 mm
- Rated current 5 A
- Rated voltage 50 V
- Rated impulse voltage 1.5 kV
- Pollution degree 3
- Clearance distance ≥ 1.4 mm
- Creepage distance ≥ 1.4 mm
- Insulation resistance >109 Ω
- Contact resistance ≤ 10 mΩ
- Limiting temperature -40 ... +85 °C
- Insertion force 50 N
- Withdrawal force 50 N
- Mating cycles ≥ 500
-
Test voltage Ur.m.s.
1.5 kV (contact-contact)1.5 kV (contact-ground)
- Isolation group I (600 ≤ CTI)
- Material (contacts) Copper alloy
-
Surface (contacts)
Sn over Ni Termination sideAu over Pd/Ni over Ni Mating side
- RoHS compliant
- ELV status compliant
- China RoHS e
- REACH Annex XVII substances No
- REACH ANNEX XIV substances No
- REACH SVHC substances No
- Specifications IEC 61076-3-106 Variant 4 (V4)
-
UL / CSA
UL 1977 ECBT2.E102079CSA-C22.2 No. 182.3 ECBT8.E102079
- PROFINET Yes
- Packaging size 1
- Net weight 20.2 g
- Country of origin Germany
- European customs tariff number 85366990
- eCl@ss 27440205 Contact insert for industrial connectors
- Data sheet
- Type sheet
- Assembly Instruction
- CAD data 3D
