Please do not use this product for DesignIns anymore.  You can use the alternatives or successors displayed below instead.
HPP V4 Signal PFT insert 20-pole

Image is for illustration purposes only. Please refer to product description.

HPP V4 Signal PFT insert 20-pole

Inserts, for panel feed through HIFF, Crimp termination, Rated current: 5A, Contacts: 20, Copper alloy, Sn over Ni, Termination side, Au over Pd/Ni over Ni, Mating side

Part number:  09 45 545 9020

  • Category Connector
  • Series HARTING PushPull (V4)
  • Identification Signal
  • Element Inserts
  • Specification for panel feed through HIFF
  • Termination method Crimp termination
  • Shielding Fully shielded, 360° shielding contact
  • Number of contacts 20
  • Wire outer diameter ≤ 2.1 mm
  • Contact spacing (termination side)
    2.4 mm
    3 mm
  • Contact spacing (mating side)
    2.4 mm
    3 mm
  • Rated current 5 A
  • Rated voltage 50 V
  • Rated impulse voltage 1.5 kV
  • Pollution degree 3
  • Clearance distance ≥ 1.4 mm
  • Creepage distance ≥ 1.4 mm
  • Insulation resistance >109 Ω
  • Contact resistance ≤ 10 mΩ
  • Limiting temperature -40 ... +85 °C
  • Insertion force ‌ 50 N
  • Withdrawal force ‌ 50 N
  • Mating cycles ≥ 500
  • Test voltage Ur.m.s.
    1.5 kV (contact-contact)
    1.5 kV (contact-ground)
  • Isolation group I (600 ≤ CTI)
  • Material (contacts) Copper alloy
  • Surface (contacts)
    Sn over Ni Termination side
    Au over Pd/Ni over Ni Mating side
  • RoHS compliant
  • ELV status compliant
  • China RoHS e
  • REACH Annex XVII substances No
  • REACH ANNEX XIV substances No
  • REACH SVHC substances No
  • Specifications IEC 61076-3-106 Variant 4 (V4)
  • Packaging size 1
  • Net weight 20.5 g
  • Country of origin Romania
  • European customs tariff number 85366990
  • eCl@ss 27440205 Contact insert for industrial connectors