The described connectors are connectors without breaking capacity (COC) according to IEC 61984 and must not be coupled or decoupled under electrical load during use as intended!
Only cables with protection class 2 shall be used!
The axial screw termination is suitable for fine stranded wires according to EN 60228 class 5. Using alternative cables have to be tested separately.
For the assembly within bulkhead mounted housings the described installation conditions of the data and type sheets must be respected.
Only the housings linked in the eShop shall be used!
For the connection of the conductor into the axial screw contact use hex key with AF 4.
Tekniske egenskaber
Ledertværsnit
16 ... 25 mm²
Ledertværsnit [AWG]
AWG 6 ... AWG 4
Nominel strøm
100 A
Nominel spænding
400 V
Nominel impulsspænding
6 kV
Forureningsgrad
3
Isolationsmodstand
>1010 Ω
Kontaktmodstand
≤ 0.3 mΩ
Afisoleringslængde
10 mm
Tilspændingsmoment
6 ... 7 Nm
Begrænsende temperatur
-40 ... +125 °C
Koblingscyklusser
≥ 500
Materialeegenskaber
Materiale (indsats)
Polycarbonate (PC)
Polyamide (PA)
Farve (indsats)
RAL 7032 (pebble grey)
Materiale (kontakter)
Copper alloy
Overflade (kontakter)
Silver plated
Materialets antændelighedsklasse i henhold til UL 94
V-0