Details
ATTENTION! The rated voltage (Power 600V, Signal 250V) of the insert which is designed for basic insulation with protective grounding only applies if the shield of the data element is connected to the ground potential. When the shield of the data element is not connected to the ground potential, rated voltages will reduce to 320V for Power and 150V for Signal.
Technical characteristics
Conductor cross-section
0.13 ... 0.33 mm² Data
0.14 ... 2.5 mm² Signal
0.14 ... 4 mm² Power
Conductor cross-section [AWG]
AWG 26 ... AWG 22 Data
AWG 26 ... AWG 14 Signal
AWG 26 ... AWG 12 Power
Rated current (data)
2 A
Rated voltage (data)
32 V
Rated impulse voltage (data)
0.8 kV
Pollution degree (data)
3
Rated current (signal)
10 A
Rated voltage (signal)
250 V
Rated impulse voltage (signal)
4 kV
Pollution degree (signal)
3
Rated current (power)
20 A
Rated voltage (power)
600 V
Rated impulse voltage (power)
6 kV
Pollution degree (power)
3
Transmission characteristics
Cat. 5 Class D up to 100 MHz
Data rate
10 Mbit/s
100 Mbit/s
Insulation resistance
>1010 Ω
Limiting temperature
-40 ... +85 °C
Mating cycles
≥ 500
Material properties
Material (insert)
Polycarbonate (PC)
Colour (insert)
RAL 7032 (pebble grey)
Material (shielding)
Copper alloy, nickel plated
Material flammability class acc. to UL 94
V-0
RoHS
compliant
ELV status
compliant
China RoHS
e
REACH Annex XVII substances
Not contained
REACH ANNEX XIV substances
Not contained
REACH SVHC substances
Not contained
California Proposition 65 substances
Yes
California Proposition 65 substances
Lead
Nickel
Fire protection on railway vehicles
EN 45545-2 (2020-08)
Requirement set with Hazard Levels
R22 (HL 1-3)
R23 (HL 1-3)
Specifications and approvals
Specifications
IEC 60664-1
IEC 61984
Commercial data
Packaging size
10
Net weight
18.05 g
Country of origin
China
European customs tariff number
85366990
GTIN
5713140282742
ETIM
EC000438
eCl@ss
27440205 Contact insert for industrial connectors