Order separately the single wire seal or the hoods/housings for an IP65 performance.
Details
A Han® 1A configuration that only consists of inserts (with or without strain relief, 09 10 000 5300) is an unenclosed connector according to IEC 61984. In this case protection against electric shock must be provided by the installation methods of the user.
Contact inserts must not be coupled or decoupled under electrical load.
Contact inserts must not be powered-up in the un-mated condition.
Technical characteristics
Conductor cross-section
0.14 ... 4 mm²
Rated current
16 A
Rated voltage
400 V
Rated impulse voltage
6 kV
Pollution degree
3
Rated current acc. to UL
15 A AWG 12
Rated voltage acc. to UL
600 V
Insulation resistance
>108 Ω
Limiting temperature
-30 ... +90 °C
Mating cycles
≥ 100
Degree of protection acc. to IEC 60529
IP20
Material properties
Material (insert)
Polyamide (PA)
Colour (insert)
RAL 9005 (jet black)
Material (seal)
NBR
Colour (seal)
Black
Material flammability class acc. to UL 94
V-0
RoHS
compliant
ELV status
compliant
China RoHS
e
REACH Annex XVII substances
Not contained
REACH ANNEX XIV substances
Not contained
REACH SVHC substances
Not contained
California Proposition 65 substances
Not contained
Fire protection on railway vehicles
EN 45545-2 (2020-08)
Requirement set with Hazard Levels
R22 (HL 1-3)
R23 (HL 1-3)
Specifications and approvals
Specifications
EN 45545-2 Fire protection on railway vehicles
IEC 61373 Category 1 Class B
IEC 60664-1
IEC 61984
UL / CSA
UL 1977 ECBT2.E235076
CSA-C22.2 No. 182.3 ECBT8.E235076
Please contact your local HARTING subsidiary for further information.
Approvals
DNV GL
Commercial data
Packaging size
1
Net weight
10 g
Country of origin
Romania
European customs tariff number
85366990
GTIN
5713140185470
ETIM
EC000438
eCl@ss
27440205 Contact insert for industrial connectors