Cerrar
Subcategorías
Han<sup>®</sup> HPR HPTC

Han® HPR HPTC

  • Hoods/housings for harsh outdoor environments
Han<sup>®</sup> Board

Han® Board

  • Crimp termination
Han<sup>®</sup> Q 3/4 Crimp

Han® Q 3/4 Crimp

  • Han® C power contacts
  • Han D® signal contacts
  • Finger safe male and female contacts
  • Leading PE crimp contact
  • Suitable for standard plastic hoods/housings or metal hoods/housings with additional PE terminating contact on the hoods/housings from the Han-Compact® series
Han<sup>®</sup> 300 A module

Han® 300 A module

  • Power module for big wire gauges up to 120 mm²
  • High rated voltage up to 1300 V
  • Compatible to the Han® 200 A crimp module
  • Easy removal of the contacts
  • Separate axial screw contacts can be terminated without any special tools directly to the wire
Han<sup>®</sup> 300 A PE module

Han® 300 A PE module

  • PE module to connect large cable diameters within the Han-Modular® hinged frames
  • Leading PE contact within the insert
  • Electrically conductive connection of the PE contact to the hinged frames and the hoods and housings acc. to EN 61984
  • Compatible to the Han® 200 A PE module

Mostrar más...
Han<sup>®</sup> 300 A module, for busbar

Han® 300 A module, for busbar

  • Short and space saving contacts
  • Termination to busbar or cable lug (the provision of protection against electric shock is the responsibility of the user)
  • IP20 protection for female and male module (by using male contacts with protective cap)
  • High rated voltage up to 1300 V
  • Compatible to the Han® 200 A crimp module
Han<sup>®</sup> Pneumatic module

Han® Pneumatic module

  • for the transmission of clean and dry compressed air
  • Operating pressure up to 10 bar (145 psi)
  • Female contacts with / without shut-off
  • Removal of tubes from pre-assembled pneumatic contacts is possible
Han<sup>®</sup> Megabit module for PCB

Han® Megabit module for PCB

  • Shielding bus separate from housing potential
  • Usable for Megabit Ethernet cat. 5e
  • Robust design
  • Low wiring costs
  • No installation effort
Han<sup>®</sup> HPR VarioShell

Han® HPR VarioShell

  • Hoods/housings for harsh outdoor environments
Han<sup>®</sup> HPR TrainPowerLine

Han® HPR TrainPowerLine

  • Hoods/housings for harsh outdoor environments
Han<sup>®</sup> HPR Frame

Han® HPR Frame

  • Size 16 B
  • Size 24 B
Han<sup>®</sup> HPR Protection covers

Han® HPR Protection covers

  • Hoods/housings for harsh outdoor environments
  • Screw lock made of high-quality stainless steel
Han<sup>®</sup> 1A Protection covers

Han® 1A Protection covers

  • IP65 in locked condition
  • Suitable for snap-in latch and lever
Han<sup>®</sup> 1A Adapter

Han® 1A Adapter

  • Toolless assembly of Han® contact inserts
  • Practical and easy handling
  • Compact design saves space
  • Optional with and without strain relief
  • Suitable for standard rail TS 35
Han<sup>®</sup> F+B

Han® F+B

  • Crimp termination
  • Screw termination
Battery crimping tool for Han<sup>®</sup> standard contacts

Battery crimping tool for Han® standard contacts

  • Fast, light, efficient – that's what crimping is all about today.
Ha-VIS eCon 4000

Ha-VIS eCon 4000

  • Low construction type
  • plug-and-play
  • M12 switches for bus and train
Han<sup>®</sup> K 32/24

Han® K 32/24

  • Combination of signal and power in one connector
  • Crimp termination for power and signal area
  • Use of standard Han E® and Han D® contacts
<b>Han<sup>®</sup> ES Press</b>

Han® ES Press

  • Reduced installation time by up to 50 % because of faster PE connection
  • Tool-free assembly lowers costs
Han<sup>®</sup> 3 A HMC

Han® 3 A HMC

  • Saves time in applications that need to be mated frequently, e.g. tool change
  • Reduced costs thanks to longevity from high mating cycles
Han<sup>®</sup> TC HMC

Han® TC HMC

  • Saves time in applications that need to be mated frequently, e.g. tool change
  • Reduced costs thanks to longevity from high mating cycles
Han<sup>®</sup> Gigabit module

Han® Gigabit module

  • Significantly improved signal integrity increases the immunity to interference
  • Future-oriented Cat. 8.2 interface for continually increasing data transmission rates
Han<sup>®</sup> M12 module

Han® M12 module

  • Saves costs by significantly reducing space requirements and weight
  • Improved safety due to new complex shielding design options,thanks to the new M12 module GND version
Han-Modular<sup>®</sup> Domino module

Han-Modular® Domino module

  • Significant reduction in required space by 50%
  • Compatible with existing components of the Han-Modular® series
Han<sup>®</sup> HPR Compact

Han® HPR Compact

  • Can be installed in the tightest of spaces thanks to the space reduction of up to 20 %
  • Can be safely assembled in narrow installation spaces by means of “blind mating” using guide pins
  • Very flexible and expandable with the extender frame
Han<sup>®</sup> HPR PYD

Han® HPR PYD

  • Contact multiplication in a standard connector ensures outstanding flexibility
  • Reduced costs due to elimination of distribution boxes
<i>har</i>-drive<sup>®</sup>

har-drive®

  • for decentraliced drive systems
Ha-VIS eCon 3011BT-AT1-SPE

Ha-VIS eCon 3011BT-AT1-SPE

  • Easy to retrofit because SPE end devices are easy to integrate into existing Ethernet networks
  • Durable thanks to robust EMC-tested design for control cabinets in automation
Ha-VIS eCon 3026BT-AT1-SPE

Ha-VIS eCon 3026BT-AT1-SPE

  • Outstanding flexibility: 6 SPE end devices can be networked with the standardised HARTING T1 Industrial® interfaces
  • Time-saving thanks to Plug & Play SPE integration with unmanaged Ethernet switches for the control cabinet
<i>har</i>-flex<sup>®</sup>

har-flex®

  • Miniature connector
  • har-flex® Power
  • har-flex® Hybrid
HARTING PushPull (V4) RJ45 Outlet

HARTING PushPull (V4) RJ45 Outlet

  • Simple mounting
  • Cable entering optionally from bottom or from topside
  • Self-closing protection caps in IP65 / IP67
  • IP65 / IP67 Label
  • Compatible with RJ45 female inserts (HIFF-version)
D-Sub InduCom

D-Sub InduCom

  • Shell housing
SEK Mezzanine

SEK Mezzanine

  • Enables SEK Mezzanine and motherboard-to-daughtercard connections/applications
  • 2.54 mm contact pitch with from 6 – 64 poles, as a supplement to DIN and har-flex®
  • Many termination techniques: wave soldering, reflow soldering and press-fit connection
D-Sub Coding

D-Sub Coding

  • Mechanical coding of size-1 or size-2 D-Sub connectors for reliable protection against improper mating
  • Additional colour coding so the different mating partners can be visually differentiated
HARTING ix Industrial<sup>® </sup>90° angled

HARTING ix Industrial® 90° angled

  • Robust and miniaturised Ethernet interface ix Industrial®
  • Good EMC characteristics
  • Vibration and shock resistant
HARTING ix Industrial<sup>®</sup> AWG 22

HARTING ix Industrial® AWG 22

  • Robust and miniaturised Ethernet interface ix Industrial®
  • Good EMC characteristics
  • Vibration and shock resistant
HARTING Mini PushPull ix Industrial<sup>®</sup>

HARTING Mini PushPull ix Industrial®

  • IP65/IP67 miniaturised Ethernet data interface based on HARTING ix Industrial® and according to IEC 61076-3-124
  • Field-assembly connector with IDC contacts
  • Shock and vibration resistant acc. to IEC 61373
HARTING RJ Industrial<sup>®</sup>

HARTING RJ Industrial®

  • Very robust full metal housing
  • Wide range IDC for solid and stranded wires from AWG 26 to AWG 22
  • No side cutter needed anymore – integrated cutting blades behind the IDC contacts cut the wires to the correct length
  • Very robust and patent pending cable fixing
  • 35° + 90° angled version with variable cable outlet in 4 different cable outlet directions
preLink<sup>®</sup>

preLink®

  • Ethernet data connector suitable for industry
  • Robust industrial design with 360° shielding, locking lever protection and high mating cycles
  • Category of transmission Cat. 6A
  • Suitable for all PoE versions
HARTING T1 Industrial

HARTING T1 Industrial

  • Internationally standardised mating face acc. to IEC 63171-6
  • For the construction of future-proof and standardised Single Pair Ethernet (SPE) communication networks with standardised cabling according to ISO / IEC 11801 and TIA 42
  • Designed for industrial applications up to M3I3C3E3 environmental conditions
  • Meets all IEEE 802.3 requirements for SPE
  • Robust industrial design with 360° shielding, locking lever protection and high mating cycles
HARTING UIC 558

HARTING UIC 558

  • Compliance relevant railway standards: IEC 61372 (Kategorie 2), IEC 45545 (Klasse: HL3/R23), UL-94-V-0
  • High flexibility due to compatibility according to UIC 558 standard
  • Durable even under adverse weather conditions thanks to IP69 protection
M12 Inner PushPull

M12 Inner PushPull
M12 Power

M12 Power

  • K-coding
  • S-coding
  • L-coding
  • Y-coding
System cabling

System cabling
Circular connectors M8

Circular connectors M8

  • Compact, robust and versatile
  • D-coding
  • P-coding
Han<sup>®</sup> 1A Y-distributor

Han® 1A Y-distributor

  • Compact size: All-purpose usage in the smallest spaces is possible
  • Tool-free assembly lowers costs
  • Can be flexibly combined due to the modular design of the Han® 1A series
AIDA H-distributor

AIDA H-distributor

  • AIDA compliant
  • The Han® PushPull (V14) termination type helps to save time when plugging in
Charging equipment for Electromobility

Charging equipment for Electromobility

  • Charging cable
  • Charging socket
  • Plug holder
<i>har</i>-modular<sup>®</sup>

har-modular®

  • The new modular solution for your Board-to-Board application.
  • CREATE YOUR OWN!
Power LED Light

Power LED Light

  • for medical applications
3D-MID Carrier for electronic components

3D-MID Carrier for electronic components

Todos los productos

Ordenar por:
Nuevos productos - Ascendente
har-modular assembling aid
Artículo nº:02 09 500 0002
har-modular assembling aid
Coding pin
har-modular coding pin T with nut
Artículo nº:02 09 500 0004
  • for female connectors
  • with selflocking nut
  • Metal
har-modular coding pin T with nut
har-modular development kit
Artículo nº:02 09 500 0006
har-modular development kit
Fixing rail
har-modular fixing rail 20.22
Artículo nº:02 09 500 1004
  • Polyamide (PA)
  • Yellow
  • 20.22 mm
har-modular fixing rail 20.22
Fixing rail
har-modular fixing rail 25.30
Artículo nº:02 09 500 1005
  • Polyamide (PA)
  • Yellow
  • 25.3 mm
har-modular fixing rail 25.30
Fixing rail
har-modular fixing rail 30.38
Artículo nº:02 09 500 1006
  • Polyamide (PA)
  • Yellow
  • 30.38 mm
har-modular fixing rail 30.38
Fixing rail
har-modular fixing rail 35.46
Artículo nº:02 09 500 1007
  • Polyamide (PA)
  • Yellow
  • 35.46 mm
har-modular fixing rail 35.46
Fixing rail
har-modular fixing rail 40.54
Artículo nº:02 09 500 1008
  • Polyamide (PA)
  • Yellow
  • 40.54 mm
har-modular fixing rail 40.54
Fixing rail
har-modular fixing rail 45.62
Artículo nº:02 09 500 1009
  • Polyamide (PA)
  • Yellow
  • 45.62 mm
har-modular fixing rail 45.62
Fixing rail
har-modular fixing rail 50.70
Artículo nº:02 09 500 1010
  • Polyamide (PA)
  • Yellow
  • 50.7 mm
har-modular fixing rail 50.70
Fixing rail
har-modular fixing rail 55.78
Artículo nº:02 09 500 1011
  • Polyamide (PA)
  • Yellow
  • 55.78 mm
har-modular fixing rail 55.78
Fixing rail
har-modular fixing rail 60.86
Artículo nº:02 09 500 1012
  • Polyamide (PA)
  • Yellow
  • 60.86 mm
har-modular fixing rail 60.86
Fixing rail
har-modular fixing rail 65.94
Artículo nº:02 09 500 1013
  • Polyamide (PA)
  • Yellow
  • 65.94 mm
har-modular fixing rail 65.94
Fixing rail
har-modular fixing rail 71.02
Artículo nº:02 09 500 1014
  • Polyamide (PA)
  • Yellow
  • 71.02 mm
har-modular fixing rail 71.02
Fixing rail
har-modular fixing rail 76.10
Artículo nº:02 09 500 1015
  • Polyamide (PA)
  • Yellow
  • 76.1 mm
har-modular fixing rail 76.10
Fixing rail
har-modular fixing rail 81.18
Artículo nº:02 09 500 1016
  • Polyamide (PA)
  • Yellow
  • 81.18 mm
har-modular fixing rail 81.18
Fixing rail
har-modular fixing rail 86.26
Artículo nº:02 09 500 1017
  • Polyamide (PA)
  • Yellow
  • 86.26 mm
har-modular fixing rail 86.26
Fixing rail
har-modular fixing rail 91.34
Artículo nº:02 09 500 1018
  • Polyamide (PA)
  • Yellow
  • 91.34 mm
har-modular fixing rail 91.34
Fixing rail
har-modular fixing rail 96.42
Artículo nº:02 09 500 1019
  • Polyamide (PA)
  • Yellow
  • 96.42 mm
har-modular fixing rail 96.42
Fixing rail
har-modular fixing rail 101.50
Artículo nº:02 09 500 1020
  • Polyamide (PA)
  • Yellow
  • 101.5 mm
har-modular fixing rail 101.50
Fixing rail
har-modular fixing rail 106.58
Artículo nº:02 09 500 1021
  • Polyamide (PA)
  • Yellow
  • 106.58 mm
har-modular fixing rail 106.58
Fixing rail
har-modular fixing rail 111.66
Artículo nº:02 09 500 1022
  • Polyamide (PA)
  • Yellow
  • 111.66 mm
har-modular fixing rail 111.66
Fixing rail
har-modular fixing rail 116.74
Artículo nº:02 09 500 1023
  • Polyamide (PA)
  • Yellow
  • 116.74 mm
har-modular fixing rail 116.74
Fixing rail
har-modular fixing rail 121.82
Artículo nº:02 09 500 1024
  • Polyamide (PA)
  • Yellow
  • 121.82 mm
har-modular fixing rail 121.82
Fixing rail
har-modular fixing rail 126.90
Artículo nº:02 09 500 1025
  • Polyamide (PA)
  • Yellow
  • 126.9 mm
har-modular fixing rail 126.90
Fixing rail
har-modular fixing rail 131.98
Artículo nº:02 09 500 1026
  • Polyamide (PA)
  • Yellow
  • 131.98 mm
har-modular fixing rail 131.98
Fixing rail
har-modular fixing rail 137.06
Artículo nº:02 09 500 1027
  • Polyamide (PA)
  • Yellow
  • 137.06 mm
har-modular fixing rail 137.06
Fixing rail
har-modular fixing rail 142.14
Artículo nº:02 09 500 1028
  • Polyamide (PA)
  • Yellow
  • 142.14 mm
har-modular fixing rail 142.14
Fixing rail
har-modular fixing rail 147.22
Artículo nº:02 09 500 1029
  • Polyamide (PA)
  • Yellow
  • 147.22 mm
har-modular fixing rail 147.22
Fixing rail
har-modular fixing rail 152.30
Artículo nº:02 09 500 1030
  • Polyamide (PA)
  • Yellow
  • 152.3 mm
har-modular fixing rail 152.30
0
Comparar
Contacto HARTING: HARTING Inc. of N.America  Bowes Road 1370  60123-5538 Elgin  USA
Soporte de HARTING:
Soporte del sitio web: Dirección de E-mail  (Para problemas técnicos)
© HARTING Technology Group
Inicio Contacto Política de privacidad Condiciones de uso Condiciones de venta Política de cookies Aviso legal