Order separately the single wire seal or the hoods/housings for an IP65 performance.
Détails
A Han® 1A configuration that only consists of inserts (with or without strain relief, 09 10 000 5300) is an unenclosed connector according to IEC 61984. In this case protection against electric shock must be provided by the installation methods of the user.
Contact inserts must not be coupled or decoupled under electrical load.
Contact inserts must not be powered-up in the un-mated condition.
Données techniques
Section de fil du conducteur
0.14 ... 4 mm²
Intensité nominale
16 A
Tension nominale
400 V
Tension de claquage
6 kV
Degré de pollution
3
Intensité nominale selon UL
15 A AWG 12
Tension nominale selon UL
600 V
Résistance d'isolement
>108 Ω
Limite de température
-30 ... +90 °C
Cycles de connexion
≥ 100
Indice de protection selon IEC 60529
IP20
Propriétés du matériau
Matériau (insert)
Polyamide (PA)
Couleur (d'insert)
RAL 9005 (jet black)
Matériau (joint)
NBR
Couleur (joint)
Black
Classe d'inflammabilité du matériau conformément à UL 94
V-0