Order separately the single wire seal or the hoods/housings for an IP65 performance.
Details
A Han® 1A configuration that only consists of inserts (with or without strain relief, 09 10 000 5300) is an unenclosed connector according to IEC 61984. In this case protection against electric shock must be provided by the installation methods of the user.
Contact inserts must not be coupled or decoupled under electrical load.
Contact inserts must not be powered-up in the un-mated condition.
Contact inserts with screw termination technology (2+PE and 3+PE) only differ in the number of contacts. If both variants are used in one application, the user must prevent incorrect mating! Safety instructions according to VDE 0100-410, Chapter 414.4.3 and EN 60204-1, Chapter 13.4.5 d) must be observed.
Technical characteristics
Conductor cross-section
0.75 ... 1.5 mm²
Rated current
10 A
Rated voltage conductor-earth
230 V
Rated voltage conductor-conductor
400 V
Rated impulse voltage
4 kV
Pollution degree
3
Rated current acc. to UL
10 A AWG 16
Rated voltage acc. to UL
250 V
Insulation resistance
>108 Ω
Tightening torque
0.25 Nm
Limiting temperature
-30 ... +90 °C
Mating cycles
≥ 100
Degree of protection acc. to IEC 60529
IP20
Material properties
Material (insert)
Polyamide (PA)
Colour (insert)
RAL 9005 (gitzwart)
Material (contacts)
Koperlegering
Surface (contacts)
Verzilverd
Material flammability class acc. to UL 94
V-0
RoHS
conform met uitzondering
RoHS exemptions
6(c): koperlegering bevat max. 4 % lood per gewicht
ELV status
conform met uitzondering
China RoHS
50
REACH Annex XVII substances
Niet ingesloten
REACH ANNEX XIV substances
Niet ingesloten
REACH SVHC substances
Ja
REACH SVHC substances
Lood
ECHA SCIP number
5dbb3851-b94e-4e88-97a1-571845975242
California Proposition 65 substances
Ja
California Proposition 65 substances
Lood
Fire protection on railway vehicles
EN 45545-2 (2020-08)
Requirement set with Hazard Levels
R22 (HL 1-3)
R23 (HL 1-3)
Specifications and approvals
Specifications
EN 45545-2 Brandbeveiliging op spoorwegvoertuigen
IEC 61373 Categorie 1 klasse B
IEC 60664-1
IEC 61984
UL / CSA
UL 1977 ECBT2.E235076
CSA-C22.2 No. 182.3 ECBT8.E235076
Neem contact op met uw plaatselijke HARTING-vertegenwoordiger voor meer informatie.
Approvals
DNV GL
Commercial data
Packaging size
1
Net weight
13.49 g
Country of origin
Germany
European customs tariff number
85366990
GTIN
5713140185715
eCl@ss
27440205 Contact insert for industrial connectors