Close
Crimping
Subcategories
Hand crimping tools

Hand crimping tools
Power crimping tools

Power crimping tools
Crimping machines

Crimping machines
High performance crimping machines

High performance crimping machines
Accessories

Accessories
Hand crimping tools

Hand crimping tools
Power crimping tools

Power crimping tools
Crimping machines

Crimping machines
High performance crimping machines

High performance crimping machines
Accessories

Accessories
Filters
  • Type of tool
    Select a value Reset filter
    • 8-indent crimping tool
      1
    • Adjustment gauge
      2
    • Assembly tool
      5
    • Battery crimping tool set
      1
    • Check gauge
      2
    • Crimp die
      22
    • Crimping insert
      39
    • Crimping machine BK
      1
    • Crimping machine TC-C01
      3
    • Crimping machine TK-M
      1
    • Crimping tool
      3
    • Foot switch
      1
    • Hand crimping tool
      40
    • Hand hydraulic crimping tool
      2
    • Interchangeable unit
      6
    • Locator
      38
    • Pneumatic crimping tool
      2
    • Quick change tool
      7
    • Replacement-tip
      1
    • Service case
      1
    • Service crimping tool
      1
    • Support block
      1
    • Table fixing
      1
    • Tool insert
      1
  • Description of the tool
    Select a value Reset filter
    • 09 93 000 5576 + 09 93 000 5476
      1
    • 21 01 100 9020
      1
    • 21 01 100 9025
      1
    • 4 indent crimp in acc. to MIL 22 520/2-01
      2
    • Angled
      2
    • BC
      1
    • BC / FC / har-bus® 64
      1
    • BC / FC 1 / har-bus® 64
      1
    • BC / har-bus® 64
      3
    • Basic machine without interchangeable unit
      1
    • Crimp die acc. to DIN 46235 with pressing width 10 ... 14 mm
      1
    • Crimp die acc. to DIN 46235 with pressing width 9 mm
      1
    • Crimp die included
      1
    • D-Sub
      3
    • DIN 41612
      1
    • FC
      1
    • FC 1
      3
    • FC 2
      4
    • FC 3
      4
    • HARTING UIC 558: 0.75 ... 1 mm²
      1
    • Han D®
      6
    • Han D®, Han E®, DIN 41626, Ferrule, F-SMA, -ST
      1
    • Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224)
      3
    • Han D®: 0.14 ... 2.5 mm²
      1
    • Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227)
      2
    • Han E®
      8
    • Han E®: 0.14 ... 4 mm²
      3
    • Han E®: 0.5 ... 2.5 mm²
      1
    • Han E®: 0.5 ... 4 mm²
      2
    • Han-Yellock®
      5
    • Han-Yellock®: 0.14 ... 4 mm²
      2
    • Han-Yellock®: 0.5 ... 2.5 mm²
      1
    • Han-Yellock®: 0.5 ... 4 mm²
      1
    • Han® C
      6
    • Han® C: 1.5 ... 4 mm²
      5
    • Han® C: 4 ... 10 mm²
      3
    • Han® HsB: 1.5 ... 4 mm²
      1
    • Han® HsB: 4 ... 10 mm²
      1
    • Han® P
      2
    • Pressing force 120 kN
      1
    • Pressing force 60 kN
      1
    • Relay contacts
      2
    • SC, F-SMA F-ST
      2
    • Spare part
      8
    • Top part
      1
    • acc. to DIN 41626
      2
    • acc. to DIN 46228
      2
    • for 0.6 mm data contacts
      1
    • for 120 kN tool
      11
    • for 250 bandoliered contacts
      3
    • for 500 bandoliered D-Sub high density contacts
      1
    • for 500 bandoliered contacts
      1
    • for 500 bandoliered standard contacts
      1
    • for 60 kN tool
      6
    • for BC contacts
      1
    • for D-Sub
      1
    • for D-Sub mixed
      1
    • for FO connector (glass fibre)
      1
    • for FO connector (plastic fibre)
      1
    • for HARTING PushPull Power contacts for crimping tool 09 99 000 0001
      1
    • for HARTING RJ Industrial® Gigalink Cat. 6A connectors
      1
    • for HARTING RJ Industrial® Gigalink connectors
      1
    • for HARTING RJ Industrial® PN Compact connector set
      1
    • for HARTING T1 Industrial contacts (AWG 24 ... AWG 22)
      1
    • for HARTING T1 Industrial contacts (AWG 28 ... AWG 26)
      1
    • for HARTING ix Industrial® to assamble the cable strain relief crimping
      1
    • for Han D® contact
      1
    • for Han E® contact
      1
    • for Han-Fast® Lock single contact
      4
    • for Han® C contact
      1
    • for M12 female contacts
      1
    • for M12 male contacts
      1
    • for M17 contacts
      1
    • for M23 power contacts
      1
    • for M23 signal contacts
      2
    • for har-bus® HM coding keys
      1
    • for har-speed M12 female contacts
      1
    • for har-speed M12 male contacts
      1
    • for assembly of D-Sub hoods
      1
    • for coaxial contact
      2
    • for contact replacement in male and female connectors
      1
    • for contacts FC 1, FC 2 and FC 3
      1
    • for crimp barrel and crimp flange
      1
    • for crimping tool 09 99 000 0695 and 09 99 000 0890
      1
    • for crimping tool 09 99 000 0888
      3
    • for four-indent crimping tools
      2
    • for individual DIN 41612 contacts
      6
    • for individual contacts
      4
    • for outer ferrule
      2
    • for part number 09 99 000 0307 and 09 99 000 0314
      2
    • for part number 09 99 000 0377
      2
    • for part number 09 99 000 0503
      2
    • for part number 09 99 000 0509
      4
    • for part number 09 99 000 0620
      2
    • for part number 09 99 000 0647
      35
    • for part number 09 99 000 0990
      5
    • for single D-Sub standard contacts
      2
    • for turned male and female contacts
      2
    • for wire end ferrules
      4
    • incl. locator
      4
  • Field of application
    Select a value Reset filter
    • Recommended for field use
      2
    • Recommended for production lines
      6
    • Recommended for stationary use in production lines
      18
    • for individual, turned male and female contacts
      9
    • for more than 25,000 crimping operations per year
      15
    • for stamped contacts on reel (250 ... 10.000)
      8
    • up to 1,000 crimping operations per year
      3
    • up to 10,000 crimping operations per year
      2
    • up to 25,000 crimping operations per year
      3
    • up to 3,000 crimping operations per year
      1
Show all filters
183 products (of 183)
1/7
New products - ascending
CONTACT LUBRICANT (40ml)
Contact lubricant DvDA
CONTACT LUBRICANT (40ml)
Article. No: 09 99 000 0829
for Han® contacts
Vaporizer (40 ml), Handling instruction
Add to Wishlist
Han CRIMP TOOL WITH LOCATOR
Service crimping tool
Han CRIMP TOOL WITH LOCATOR
Article. No: 09 99 000 0021
Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 2.5 mm², Han-Yellock®: 0.5 ... 2.5 mm²
Conductor cross-section: 0.14 ... 2.5 mm²
Add to Wishlist
Han Hand Crimp Tool
Hand crimping tool
Han Hand Crimp Tool
Article. No: 09 99 000 0110
Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han-Yellock®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²
Conductor cross-section: 0.14 ... 4 mm²
Add to Wishlist
Double-Indent Crimping Tool
Crimping tool
Double-Indent Crimping Tool
Article. No: 09 99 000 0888
Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227), Han E®: 0.14 ... 4 mm², Han-Yellock®: 0.14 ... 4 mm², Han® C: 1.5 ... 4 mm²
Add to Wishlist
Crimping Tool Han C 4/6/10 mm2
Hand crimping tool
Crimping Tool Han C 4/6/10 mm2
Article. No: 09 99 000 0377
Han® C: 4 ... 10 mm²
Conductor cross-section: 4 ... 10 mm²
Add to Wishlist
DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.
Hand crimping tool
DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.
Article. No: 09 99 000 0501
for turned male and female contacts, 4 indent crimp in acc. to MIL 22 520/2-01
Conductor cross-section: 0.09 ... 0.82 mm²
Add to Wishlist
Locator D-Sub turned standard contacts
Locator
Locator D-Sub turned standard contacts
Article. No: 09 99 000 0531
for single D-Sub standard contacts
Add to Wishlist
basic hand crimp tool BC/FC/har-bus64
Hand crimping tool
basic hand crimp tool BC/FC/har-bus64
Article. No: 09 99 000 0620
for individual DIN 41612 contacts, BC / FC / har-bus® 64
Add to Wishlist
crimp set FC 3
Crimping insert
crimp set FC 3
Article. No: 09 99 000 0623
for individual contacts, FC 3
Conductor cross-section: 0.5 ... 1.5 mm² for FC 3 contacts
Add to Wishlist
SUB-D CRIMP TOOL SINGLE CONTACT
Hand crimping tool
SUB-D CRIMP TOOL SINGLE CONTACT
Article. No: 09 99 000 0175
for single stamped D-Sub contact
Conductor cross-section: 0.09 ... 0.56 mm²
Add to Wishlist
Crimp set BC/FC1/har-bus 64
Crimping insert
Crimp set BC/FC1/har-bus 64
Article. No: 09 99 000 0621
for individual contacts, BC / FC 1 / har-bus® 64
Conductor cross-section: 0.09 ... 0.5 mm² for BC contacts 0.09 ... 0.25 mm² for FC 1 contacts
Add to Wishlist
crimp set FC 2
Crimping insert
crimp set FC 2
Article. No: 09 99 000 0622
for individual contacts, FC 2
Conductor cross-section: 0.14 ... 0.56 mm² for FC 2 contacts
Add to Wishlist
Go / no-go gauge for 09990000888
Check gauge
Go / no-go gauge for 09990000888
Article. No: 09 99 000 0889
for crimping tool 09 99 000 0888, for optional testing
Add to Wishlist
DIN-Tool Ersatzhülse M
Replacement-tip
DIN-Tool Ersatzhülse M
Article. No: 09 99 000 0243
DIN 41612, for removal tool 09 99 000 0174
Add to Wishlist
DIN-Tool Positionierer FC
Locator
DIN-Tool Positionierer FC
Article. No: 09 99 000 0631
FC, for part number 09 99 000 0620
Add to Wishlist
D SUB HD SERVICE CRIMP TOOL
Hand crimping tool
D SUB HD SERVICE CRIMP TOOL
Article. No: 09 99 000 0596
Add to Wishlist
Crimptool Opening
Hand crimping tool
Crimptool Opening
Article. No: 09 99 000 0647
for crimp barrel and crimp flange
Add to Wishlist
Crimp die 16mm² for 60 kN tool
Crimp die
Crimp die 16mm² for 60 kN tool
Article. No: 09 99 000 0853
for 60 kN tool
Conductor cross-section: 16 mm²
Add to Wishlist
Crimp die 10mm² for 60 kN tool
Crimp die
Crimp die 10mm² for 60 kN tool
Article. No: 09 99 000 0852
for 60 kN tool
Conductor cross-section: 10 mm²
Add to Wishlist
Locator Set Han D/E/C, for Crimping tool
Locator
Locator Set Han D/E/C, for Crimping tool
Article. No: 09 99 000 0376
Spare part, Han D®, Han E®, Han® C
Add to Wishlist
Crimp die 25mm² for 60 kN tool
Crimp die
Crimp die 25mm² for 60 kN tool
Article. No: 09 99 000 0854
for 60 kN tool
Conductor cross-section: 25 mm²
Add to Wishlist
Crimp die 35mm² for 60 kN tool
Crimp die
Crimp die 35mm² for 60 kN tool
Article. No: 09 99 000 0855
for 60 kN tool
Conductor cross-section: 35 mm²
Add to Wishlist
Hand hydraulic crimping tool 60 kN
Hand hydraulic crimping tool
Hand hydraulic crimping tool 60 kN
Article. No: 09 99 000 0851
Pressing force 60 kN, Crimp die acc. to DIN 46235 with pressing width 9 mm
Conductor cross-section: 10 ... 70 mm²
Add to Wishlist
Locator f. crimping-tool 09990000888
Locator
Locator f. crimping-tool 09990000888
Article. No: 09 99 000 0887
Spare part, for crimping tool 09 99 000 0888
Add to Wishlist
DSUB HAND CRIMP TOOL POWER CONTACT
Hand crimping tool
DSUB HAND CRIMP TOOL POWER CONTACT
Article. No: 09 99 000 0509
for power contacts
Conductor cross-section: 0.5 ... 6 mm²
Add to Wishlist
DIN-Tool Positionierer BC
Locator
DIN-Tool Positionierer BC
Article. No: 09 99 000 0630
BC / har-bus® 64, for part number 09 99 000 0620
Add to Wishlist
Locator D-Sub für. 0501 (Gigabit Modul )
Locator
Locator D-Sub für. 0501 (Gigabit Modul )
Article. No: 09 99 000 0897
for single D-Sub standard contacts, 09 93 000 5576 + 09 93 000 5476
Add to Wishlist
DSUB HAND TOOLS
Hand crimping tool
DSUB HAND TOOLS
Article. No: 09 99 000 0169
for 500 bandoliered standard contacts
Conductor cross-section: 0.09 ... 0.56 mm²
Add to Wishlist
Han Yellock Locator for 0021 tool
Locator
Han Yellock Locator for 0021 tool
Article. No: 09 99 000 0343
Han-Yellock®
Add to Wishlist
Crimp die 50mm² for 60 kN tool
Crimp die
Crimp die 50mm² for 60 kN tool
Article. No: 09 99 000 0856
for 60 kN tool
Conductor cross-section: 50 mm²
Add to Wishlist
1 2 3 more 7
Compare
0
Sort by
Filters
0

Topics & Trends

HARTING contact: HARTING Inc. of N.America  Bowes Road 1370  60123-5538 Elgin  United States
HARTING support: 866-278-0306E-mail address  (For questions regarding products, orders and user accounts)
Website support: E-mail address  (For technical problems regarding the website)
© HARTING Technology Group
Home Contact Privacy Policy Terms of Use Sales and delivery conditions Cookie policy Imprint