Order separately the single wire seal or the hoods/housings for an IP65 performance.
A Han® 1A configuration that only consists of inserts (with or without strain relief, 09 10 000 5300) is an unenclosed connector according to IEC 61984. In this case protection against electric shock must be provided by the installation methods of the user.
Contact inserts must not be coupled or decoupled under electrical load.
Contact inserts must not be powered-up in the un-mated condition.
0.14 ... 4 mm²
Rated impulse voltage
Rated current acc. to UL
15 A @ AWG 12
Rated voltage acc. to UL
-30 ... +90 °C
Degree of protection acc. to IEC 60529
RAL 9005 (jet black)
Material flammability class acc. to UL 94
REACH Annex XVII substances
REACH ANNEX XIV substances
REACH SVHC substances
California Proposition 65 substances
Fire protection on railway vehicles
EN 45545-2 (2020-08)
Requirement set with Hazard Levels
R22 (HL 1-3)
R23 (HL 1-3)
Specifications and approvals
EN 45545-2 Fire protection on railway vehicles
IEC 61373 Category 1 Class B
UL / CSA
UL 1977 ECBT2.E235076
CSA-C22.2 No. 182.3 ECBT8.E235076
Please contact your local HARTING subsidiary for further information.
Country of origin
European customs tariff number
27440205 Contact insert for industrial connectors