The described connectors are connectors without breaking capacity (COC) according to IEC 61984 and must not be coupled or decoupled under electrical load during use as intended!
Only cables with protection class 2 shall be used!
The axial screw termination is suitable for fine stranded wires according to EN 60228 class 5. Using alternative cables have to be tested separately.
For the assembly within bulkhead mounted housings the described installation conditions of the data and type sheets must be respected.
Only the housings linked in the eShop shall be used!
For the connection of the conductor into the axial screw contact use hex key with AF 4.
Technical characteristics
Conductor cross-section
16 ... 25 mm²
Conductor cross-section [AWG]
AWG 6 ... AWG 4
Rated current
100 A
Rated voltage
400 V
Rated impulse voltage
6 kV
Pollution degree
3
Insulation resistance
>1010 Ω
Contact resistance
≤ 0.3 mΩ
Stripping length
10 mm
Tightening torque
6 ... 7 Nm
Limiting temperature
-40 ... +125 °C
Mating cycles
≥ 500
Material properties
Material (insert)
Polycarbonate (PC)
Polyamide (PA)
Colour (insert)
RAL 7032 (pebble grey)
Material (contacts)
Copper alloy
Surface (contacts)
Silver plated
Material flammability class acc. to UL 94
V-0
RoHS
compliant
ELV status
compliant
China RoHS
e
REACH Annex XVII substances
Not contained
REACH ANNEX XIV substances
Not contained
REACH SVHC substances
Not contained
California Proposition 65 substances
Yes
California Proposition 65 substances
Nickel
Specifications and approvals
Specifications
IEC 60664-1
IEC 61984
Commercial data
Packaging size
1
Net weight
31.31 g
Country of origin
Germany
European customs tariff number
85366990
GTIN
5713140186521
ETIM
EC000438
eCl@ss
27440205 Contact insert for industrial connectors