This product is available upon request. Please contact your local HARTING subsidiary.
Image is for illustration purposes only. Please refer to product description.
ix Industrial 10A-1 plug A1-I26
Connectors, IDC termination, Rated current: 1.5 A, Contacts: 8, + 2x GND, Copper alloy, Au over Ni, Mating side, Au over Ni, Termination side, Sn over Ni, Mating side (shielding), Ni, Termination side (shielding), Degree of protection: IP20
Part number: 09 45 181 2581 XL
Go to:
- Category Connectors
- Series HARTING ix Industrial®
- Identification Data
- Element Cable connector
- Specification Angled bottom
- Termination method IDC termination
- Shielding Fully shielded, 360° shielding contact
- Number of contacts 8
- further contacts + 2x GND
- Coding Type A
- Pack contents Packaging with 100 pieces
- Conductor cross-section AWG 28/7 ... AWG 26/7
- Wire outer diameter 0.95 ... 1.05 mm
- Rated current 1.5 A
-
Rated voltage
50 V AC60 V DC
- Transmission characteristics Cat. 6A Class EA up to 500 MHz
-
Data rate
10 Mbit/s 100 Mbit/s 1 Gbit/s 2.5 Gbit/s 5 Gbit/s 10 Gbit/s
- Contact resistance ≤ 30 mΩ
- Shielding resistance ≤ 100 mΩ
- Limiting temperature -40 ... +85 °C
- Storage temperature -30 ... +60 °C
- Insertion force ≤ 25 N
- Withdrawal force ≤ 25 N
- Mating cycles ≥ 5,000
- Degree of protection acc. to IEC 60529 IP20
- Cable diameter 5.5 ... 7.2 mm
- Test voltage Ur.m.s. 0.5 kV
- Retention force ≥80 N locking
- Material (insert) Polyamide (PA)
- Colour (insert) Black
- Material (contacts) Copper alloy
-
Surface (contacts)
Au over Ni Mating sideAu over Ni Termination sideSn over Ni Mating side (shielding)Ni Termination side (shielding)
- Material flammability class acc. to UL 94 V-0
-
Specifications
IEC 61076-3-124EN 45545-2 R22, R23: HL1, HL2, HL3
-
UL / CSA
UL 1977 ECBT2.E102079CSA-C22.2 No. 182.3 ECBT8.E102079
- Packaging size 100
- Country of origin Japan
- European customs tariff number 85366990
- eCl@ss 27440101 Rectangular connectors (set)
