This contact insert is an unenclosed connector according to IEC 61984. In this case protection against electric shock must be provided by the installation methods of the user.
Contact inserts must not be coupled or decoupled under electrical load.
Contact inserts must not be powered-up in the un-mated condition.
Technical characteristics
Contact spacing (mating side)
7.62 mm
Rated current
32 A
Rated current
The current-carrying capacity depends significantly on the printed circuit board used, the conductor cross-section used and the specific installation situation.
Rated voltage conductor-earth
480 V
Rated voltage conductor-conductor
830 V
Rated impulse voltage
6 kV
Pollution degree
2
Limiting temperature
-25 ... +125 °C
-5 ... +65 °C While mating or unmating
Mating cycles
≥ 75
Degree of protection acc. to IEC 60529
IP20
PCB thickness
2.2 mm ±10 %
Material properties
Material (insert)
Thermoplastic resin (PBT)
Colour (insert)
Black
Material (contacts)
Copper alloy
Surface (contacts)
Silver plated
Material flammability class acc. to UL 94
V-0
RoHS
compliant with exemption
RoHS exemptions
6(c): Copper alloy containing up to 4 % lead by weight
ELV status
compliant with exemption
China RoHS
50
REACH Annex XVII substances
Not contained
REACH ANNEX XIV substances
Not contained
REACH SVHC substances
Yes
REACH SVHC substances
Lead
ECHA SCIP number
5dbb3851-b94e-4e88-97a1-571845975242
California Proposition 65 substances
Yes
California Proposition 65 substances
Lead
Specifications and approvals
UL / CSA
UL 1977 ECBT2.E235076
CSA-C22.2 No. 182.3 ECBT8.E235076
Commercial data
Packaging size
80
Net weight
10.28 g
Country of origin
Romania
European customs tariff number
85340090
GTIN
5713140186712
ETIM
EC000438
eCl@ss
27440205 Contact insert for industrial connectors