Assembly tools
  • Easy handling
  • Robust design
Filters
  • Type of tool
    Select a value Reset filter
    • Assembly tool
      26
    • Battery hydraulic punch driver
      1
    • Bench press
      1
    • Bit ¼in as a spare part for guiding pins and bushes
      1
    • Cable cutter
      1
    • Cabling tool for termination
      7
    • Dynamometric screwdriver
      7
    • Han® VDE Screw Driver Set
      1
    • Hexagonal driver
      6
    • Hexagonal head screwdriver
      1
    • Hexagonal scewdriver
      1
    • Hydraulic hand punch driver
      1
    • Insertion / removal tools
      2
    • Interchangeable blades
      1
    • One click cleaner
      2
    • Pliers
      1
    • Polishing paper
      3
    • Polishing tool
      6
    • Polishing tool HP duplex
      1
    • Punching units
      21
    • Replacement-tip
      1
    • Screw driver set Slimline
      1
    • Spare part
      1
    • Tool insert
      2
    • Tool-kit
      2
    • Torque set
      4
    • Torque tool
      1
  • Description of the tool
    Select a value Reset filter
    • + adapter blade
      1
    • + different bits
      1
    • 1.25 mm
      1
    • 2.5 mm
      1
    • 40 A contact
      2
    • 70 A contact
      1
    • Adapter 3/8in
      3
    • Bit ¼in
      2
    • Bottom part
      1
    • Cable gland
      1
    • DIN 41612
      6
    • F-ST
      1
    • Ferrule
      1
    • For SP1 and SP2
      1
    • HARTING PushPull (V4) Power
      1
    • Han D®
      1
    • Han E®
      1
    • Han-Modular®
      1
    • Han-Yellock®
      1
    • Han® 3 A
      1
    • Han® 3 A Push-In
      1
    • Han® F+B
      1
    • Han® Q 5/0
      1
    • Insertion tool for coding pin
      1
    • Insertion tool for single male press-in contacts
      2
    • Insolated blade for slim assembly
      1
    • Only measuring device
      1
    • POF cable 2.2 mm diameter
      1
    • Punching pressure: 60 kN
      2
    • SC
      1
    • SC POF
      1
    • Small cross-section
      1
    • Staf®
      1
    • Suitable for D-Sub
      1
    • Suitable for D-Sub and SEK
      2
    • Suitable for SEK DIP
      1
    • Suitable for SEK LP, 2 rows
      1
    • Suitable for SEK LP, 4 rows
      1
    • Suitable for SEK female
      1
    • Suitable for har-flex® female
      1
    • The standard set
      1
    • Tightening torque: 0.5 ... 1.2 Nm
      1
    • Tightening torque: 0.5 Nm
      1
    • Tightening torque: 1 ... 5 Nm
      1
    • Tightening torque: 5 ... 14 Nm
      1
    • To produce panel cut outs for connectors
      2
    • To tighten the har-port fixing nut
      1
    • Top part
      1
    • Variable length of blade
      1
    • With ball end
      1
    • With grip
      2
    • With measuring device
      1
    • har-bus® HM
      1
    • for 7/8"
      1
    • for D-Sub hoods (50 contacts)
      1
    • for D-Sub hoods (9-37 contacts)
      1
    • for GI 1 μ-grain size
      1
    • for GI 9 μ-grain size
      1
    • for HARTING RJ Industrial® Gigalink Cat. 6A connectors
      1
    • for HARTING RJ Industrial® Gigalink connectors
      1
    • for HARTING RJ Industrial® PN Compact connector set
      1
    • for HARTING ix Industrial® IP20 PushPull and Mini PushPull ix Industrial® for positioning the cable guides on the IDC unit. Required for the assembly of AWG 22 variants.
      1
    • for HARTING ix Industrial® and HARTING Mini PushPull ix Industrial® to assemble the single wire to the IDC and the cable strain relief crimping
      1
    • for HARTING ix Industrial® to assemble the single wire to the IDC and the cable strain relief crimping
      2
    • for HARTING screw contacts and fixing screws
      1
    • for Han® ES insert
      1
    • for High Current axial screw contact
      1
    • for InduCom hoods with hexagonal screws
      1
    • for M12 Power
      1
    • for M12 Slim Design
      1
    • for M12-L
      1
    • for M12-S
      1
    • for M8
      2
    • for POF grain size 1000
      1
    • for har-bus® HM coding keys
      1
    • for har-flex® Board IDC
      1
    • for an easy insertion of male and female contacts into the insulation body
      1
    • for angled variant
      1
    • for assembly of D-Sub hoods
      2
    • for axial screw
      7
    • for breaking out the coding area
      1
    • for contacts BC / har-bus® 64
      1
    • for contacts FC 1, FC 2 and FC 3
      1
    • for crimp contacts
      2
    • for discrete wire termination
      8
    • for flange
      3
    • for guiding pins and bushes
      1
    • for hydraulic punch drivers
      21
    • for ix Industrial® assembly tool
      2
    • for part number 09 99 000 0615
      1
    • for part number 09 99 000 0847
      1
    • for power contact
      1
    • for preLink® termination block
      1
    • for single D-Sub high density contacts
      1
    • for single D-Sub standard contacts
      1
    • for single modules
      1
    • for straight variant
      1
    • for termination of insulation displacement connectors
      1
    • incl. 1/4in Bit
      1
    • incl. reversing blade (AF 2.0 + AF 2.5 + PH2)
      1
103 products (of 103)
1/4
Compare
0
Sort by
Filters
0

Topics & Trends