Close
Crimping tools
  • Can be processed manually
  • Gas-tight crimp connections
  • Ergonomic design
Filters
  • Type of tool
    Select a value Reset filter
    • 8-indent crimping tool
      1
    • Adjustment gauge
      2
    • Battery crimping tool set
      1
    • Battery hydraulic tool
      2
    • Check gauge
      2
    • Crimp die
      22
    • Crimping insert
      39
    • Crimping tool
      3
    • Foot switch
      1
    • Hand crimping tool
      41
    • Hand hydraulic crimping tool
      2
    • Locator
      38
    • Pneumatic crimping tool
      2
    • Service case
      1
    • Service crimping tool
      1
    • Table fixing
      1
  • Description of the tool
    Select a value Reset filter
    • 09 93 000 5576 + 09 93 000 5476
      1
    • 21 01 100 9020
      1
    • 21 01 100 9025
      1
    • 4 indent crimp in acc. to MIL 22 520/2-01
      2
    • Angled
      2
    • BC
      1
    • BC / FC / har-bus® 64
      1
    • BC / FC 1 / har-bus® 64
      1
    • BC / har-bus® 64
      3
    • Crimp die acc. to DIN 46235 with pressing width 10 ... 14 mm
      2
    • Crimp die acc. to DIN 46235 with pressing width 9 mm
      2
    • Crimp die included
      1
    • FC
      1
    • FC 1
      2
    • FC 2
      3
    • FC 3
      3
    • HARTING UIC 558: 0.75 ... 1 mm²
      1
    • Han D®
      5
    • Han D®, Han E®, DIN 41626, Ferrule, F-SMA, -ST
      1
    • Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224)
      3
    • Han D®: 0.14 ... 2.5 mm²
      1
    • Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227)
      2
    • Han E®
      7
    • Han E®: 0.14 ... 4 mm²
      3
    • Han E®: 0.5 ... 2.5 mm²
      1
    • Han E®: 0.5 ... 4 mm²
      2
    • Han-Yellock®
      4
    • Han-Yellock®: 0.14 ... 4 mm²
      2
    • Han-Yellock®: 0.5 ... 2.5 mm²
      1
    • Han-Yellock®: 0.5 ... 4 mm²
      1
    • Han® C
      5
    • Han® C: 1.5 ... 4 mm²
      5
    • Han® C: 4 ... 10 mm²
      3
    • Han® HsB: 1.5 ... 4 mm²
      1
    • Han® HsB: 4 ... 10 mm²
      1
    • Han® P
      1
    • Pressing force 120 kN
      2
    • Pressing force 60 kN
      2
    • Relay contacts
      2
    • SC, F-SMA F-ST
      2
    • Spare part
      8
    • acc. to DIN 41626
      2
    • acc. to DIN 46228
      2
    • for 0.6 mm data contacts
      1
    • for 120 kN tool
      11
    • for 250 bandoliered contacts
      3
    • for 500 bandoliered D-Sub high density contacts
      1
    • for 500 bandoliered contacts
      1
    • for 500 bandoliered standard contacts
      1
    • for 60 kN tool
      6
    • for D-Sub
      1
    • for D-Sub mixed
      1
    • for FO connector (glass fibre)
      1
    • for FO connector (plastic fibre)
      1
    • for HARTING PushPull Power contacts for crimping tool 09 99 000 0001
      1
    • for HARTING T1 Industrial contacts (AWG 24 ... AWG 22)
      1
    • for HARTING T1 Industrial contacts (AWG 28 ... AWG 26)
      1
    • for Han-Fast® Lock single contact
      4
    • for M12 female contacts
      1
    • for M12 male contacts
      1
    • for M17 contacts
      1
    • for M23 power contacts
      1
    • for M23 signal contacts
      2
    • for har-speed M12 female contacts
      1
    • for har-speed M12 male contacts
      1
    • for coaxial contact
      2
    • for contacts FC 1, FC 2 and FC 3
      1
    • for crimp barrel and crimp flange
      1
    • for crimping tool 09 99 000 0695 and 09 99 000 0890
      1
    • for crimping tool 09 99 000 0888
      3
    • for crimping tool 09 99 000 0890
      1
    • for crimping tool and 5 sets inserts, incl. screwdriver for insert change, without contents
      1
    • for female contacts
      1
    • for following 1 mm POF contacts
      1
    • for four-indent crimping tools
      2
    • for individual DIN 41612 contacts
      6
    • for individual contacts
      4
    • for inner contact die
      1
    • for male and female contacts
      1
    • for male contacts
      1
    • for optional testing
      1
    • for outer ferrule
      2
    • for part number 09 99 000 0307 and 09 99 000 0314
      2
    • for part number 09 99 000 0377
      2
    • for part number 09 99 000 0501
      1
    • for part number 09 99 000 0501 and Data- und Power contacts Y-coding
      1
    • for part number 09 99 000 0503
      2
    • for part number 09 99 000 0509
      4
    • for part number 09 99 000 0620
      2
    • for part number 09 99 000 0647
      35
    • for part number 09 99 000 0990
      5
    • for power contacts
      2
    • for shielded bushing
      1
    • for signal contacts
      1
    • for single D-Sub standard contacts
      2
    • for single stamped D-Sub contact
      1
    • for turned male and female contacts
      2
    • for type M
      1
    • for wire end ferrules
      4
    • incl. locator
      4
Show all filters
159 products (of 159)
1/6
New products - ascending
Han CRIMP TOOL WITH LOCATOR
Service crimping tool
Han CRIMP TOOL WITH LOCATOR
Article. No: 09 99 000 0021
Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 2.5 mm², Han-Yellock®: 0.5 ... 2.5 mm²
Conductor cross-section: 0.14 ... 2.5 mm²
Add to Wishlist
Han Hand Crimp Tool
Hand crimping tool
Han Hand Crimp Tool
Article. No: 09 99 000 0110
Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han-Yellock®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²
Conductor cross-section: 0.14 ... 4 mm²
Add to Wishlist
Double-Indent Crimping Tool
Crimping tool
Double-Indent Crimping Tool
Article. No: 09 99 000 0888
Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227), Han E®: 0.14 ... 4 mm², Han-Yellock®: 0.14 ... 4 mm², Han® C: 1.5 ... 4 mm²
Add to Wishlist
Crimping Tool Han C 4/6/10 mm2
Hand crimping tool
Crimping Tool Han C 4/6/10 mm2
Article. No: 09 99 000 0377
Han® C: 4 ... 10 mm²
Conductor cross-section: 4 ... 10 mm²
Add to Wishlist
DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.
Hand crimping tool
DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.
Article. No: 09 99 000 0501
for turned male and female contacts, 4 indent crimp in acc. to MIL 22 520/2-01
Conductor cross-section: 0.09 ... 0.82 mm²
Add to Wishlist
Locator D-Sub turned standard contacts
Locator
Locator D-Sub turned standard contacts
Article. No: 09 99 000 0531
for single D-Sub standard contacts
Add to Wishlist
basic hand crimp tool BC/FC/har-bus64
Hand crimping tool
basic hand crimp tool BC/FC/har-bus64
Article. No: 09 99 000 0620
for individual DIN 41612 contacts, BC / FC / har-bus® 64
Add to Wishlist
crimp set FC 3
Crimping insert
crimp set FC 3
Article. No: 09 99 000 0623
for individual contacts, FC 3
Conductor cross-section: 0.5 ... 1.5 mm² for FC 3 contacts
Add to Wishlist
SUB-D CRIMP TOOL SINGLE CONTACT
Hand crimping tool
SUB-D CRIMP TOOL SINGLE CONTACT
Article. No: 09 99 000 0175
for single stamped D-Sub contact
Conductor cross-section: 0.09 ... 0.56 mm²
Add to Wishlist
Crimp set BC/FC1/har-bus 64
Crimping insert
Crimp set BC/FC1/har-bus 64
Article. No: 09 99 000 0621
for individual contacts, BC / FC 1 / har-bus® 64
Conductor cross-section: 0.09 ... 0.5 mm² for BC contacts 0.09 ... 0.25 mm² for FC 1 contacts
Add to Wishlist
crimp set FC 2
Crimping insert
crimp set FC 2
Article. No: 09 99 000 0622
for individual contacts, FC 2
Conductor cross-section: 0.14 ... 0.56 mm² for FC 2 contacts
Add to Wishlist
Go / no-go gauge for 09990000888
Check gauge
Go / no-go gauge for 09990000888
Article. No: 09 99 000 0889
for crimping tool 09 99 000 0888, for optional testing
Add to Wishlist
DIN-Tool Positionierer FC
Locator
DIN-Tool Positionierer FC
Article. No: 09 99 000 0631
FC, for part number 09 99 000 0620
Add to Wishlist
D SUB HD SERVICE CRIMP TOOL
Hand crimping tool
D SUB HD SERVICE CRIMP TOOL
Article. No: 09 99 000 0596
Add to Wishlist
Crimptool Opening
Hand crimping tool
Crimptool Opening
Article. No: 09 99 000 0647
for crimp barrel and crimp flange
Add to Wishlist
Crimp die 16mm² for 60 kN tool
Crimp die
Crimp die 16mm² for 60 kN tool
Article. No: 09 99 000 0853
for 60 kN tool
Conductor cross-section: 16 mm²
Add to Wishlist
Crimp die 10mm² for 60 kN tool
Crimp die
Crimp die 10mm² for 60 kN tool
Article. No: 09 99 000 0852
for 60 kN tool
Conductor cross-section: 10 mm²
Add to Wishlist
Locator Set Han D/E/C, for Crimping tool
Locator
Locator Set Han D/E/C, for Crimping tool
Article. No: 09 99 000 0376
Spare part, Han D®, Han E®, Han® C
Add to Wishlist
Crimp die 25mm² for 60 kN tool
Crimp die
Crimp die 25mm² for 60 kN tool
Article. No: 09 99 000 0854
for 60 kN tool
Conductor cross-section: 25 mm²
Add to Wishlist
Crimp die 35mm² for 60 kN tool
Crimp die
Crimp die 35mm² for 60 kN tool
Article. No: 09 99 000 0855
for 60 kN tool
Conductor cross-section: 35 mm²
Add to Wishlist
Hand hydraulic crimping tool 60 kN
Hand hydraulic crimping tool
Hand hydraulic crimping tool 60 kN
Article. No: 09 99 000 0851
Pressing force 60 kN, Crimp die acc. to DIN 46235 with pressing width 9 mm
Conductor cross-section: 10 ... 70 mm²
Add to Wishlist
Locator f. crimping-tool 09990000888
Locator
Locator f. crimping-tool 09990000888
Article. No: 09 99 000 0887
Spare part, for crimping tool 09 99 000 0888
Add to Wishlist
DSUB HAND CRIMP TOOL POWER CONTACT
Hand crimping tool
DSUB HAND CRIMP TOOL POWER CONTACT
Article. No: 09 99 000 0509
for power contacts
Conductor cross-section: 0.5 ... 6 mm²
Add to Wishlist
DIN-Tool Positionierer BC
Locator
DIN-Tool Positionierer BC
Article. No: 09 99 000 0630
BC / har-bus® 64, for part number 09 99 000 0620
Add to Wishlist
Locator D-Sub für. 0501 (Gigabit Modul )
Locator
Locator D-Sub für. 0501 (Gigabit Modul )
Article. No: 09 99 000 0897
for single D-Sub standard contacts, 09 93 000 5576 + 09 93 000 5476
Add to Wishlist
DSUB HAND TOOLS
Hand crimping tool
DSUB HAND TOOLS
Article. No: 09 99 000 0169
for 500 bandoliered standard contacts
Conductor cross-section: 0.09 ... 0.56 mm²
Add to Wishlist
Han Yellock Locator for 0021 tool
Locator
Han Yellock Locator for 0021 tool
Article. No: 09 99 000 0343
Han-Yellock®
Add to Wishlist
Crimp die 50mm² for 60 kN tool
Crimp die
Crimp die 50mm² for 60 kN tool
Article. No: 09 99 000 0856
for 60 kN tool
Conductor cross-section: 50 mm²
Add to Wishlist
Battery Crimping Tool Set
Battery crimping tool set
Battery Crimping Tool Set
Article. No: 09 99 000 0990
Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²
Conductor cross-section: 0.14 ... 4 mm²
Add to Wishlist
CRIMPING TOOL
Hand crimping tool
CRIMPING TOOL
Article. No: 09 99 000 0120
for 250 bandoliered contacts, FC 3
Conductor cross-section: 0.5 ... 1.5 mm²
Add to Wishlist
1 2 3 more 6
Compare
0
Sort by
Filters
0

Topics & Trends

HARTING Newsletter