Product-Finder (1 Products)
Product-Finder
1 of 1 Products filtered
Subcategories
Mini Coax

Mini Coax

  • Press-in termination
  • 50 Ohm
  • 1 to 2 rows
  • Up to 10 contacts
  • Up to 2.5 GHz
Han<sup>®</sup> S

Han® S

  • Fulfils requirements according to the newest standards of the battery storage market
  • Finger safe male and female contacts
  • Housing 360° rotatable even when mounted
Han<sup>®</sup> DDD

Han® DDD

  • High density of contacts
  • for requirements up to 250 V / 10 A
  • Time saving rapid termination by use of crimping contacts
  • Gold and silver contacts available
Han<sup>®</sup> K 6/6

Han® K 6/6

  • Combination of signal and power in one connector
  • Crimp termination for power and signal area
  • 16 coding options
  • + 6 additional signal contacts
Han<sup>®</sup> 200 A module

Han® 200 A module

  • Power module for big cross-sections up to 70 mm²
  • High rated voltage up to 1300 V
  • IP20 protection for female and male module (by using male contacts with protective cap)
  • Compatible to the Han® 300 A module

Show more...

Han<sup>®</sup> 300 A module

Han® 300 A module

  • Power module for big wire gauges up to 120 mm²
  • High rated voltage up to 1300 V
  • IP20 protection for female and male module (by using male contacts with protective cap)
  • Compatible to the Han® 200 A crimp module
Han DD<sup>®</sup> double module

Han DD® double module

  • 36 Han D® contacts up to 400 V
  • Suitable for transmitting power (10 A) and signals in one module
  • e.g. for three phase AC motors including feedback for all six axes of a robot
Han<sup>®</sup> Shielded module basic

Han® Shielded module basic

  • EMC compatible connection of the cable screen with a large-area shielding plate
  • High contact density up to 27 shielded contacts
  • Applicable as cost effective shielding connection
Han<sup>®</sup> Shielded power module

Han® Shielded power module

  • Interface for typical motor applications such as frequency-controlled drives
  • 4 power contacts (pin 4 is pre-leading to be used as a PE)
  • 2 signal contacts for temperature monitoring or breaks
  • EMC compatible connection of the cable screen with a large-area shielding plate
Han-Smart<sup>®</sup> ID Profinet module

Han-Smart® ID Profinet module

  • Module for identifying industrial components
  • Profinet I/O communication protocol conformance class B
  • SNMP enabled (V1, V2C)
Han-Smart<sup>®</sup> HEM module

Han-Smart® HEM module

  • Continuously voltage and current measurement
  • Data interval 1 second
  • Communication via MODBus TCP or RTU
  • Analysing up to 25th harmonics per phase
  • Power factor, frequency, active-, reactive-, apparent power calculation
Han<sup>®</sup> HsB Crimp termination

Han® HsB Crimp termination

  • Suitable for power supply applications
  • Crimp termination
Han-Port<sup>®</sup>

Han-Port®

  • Application with socket and data connector (RJ45, USB)
  • Compact design for easy installation in single or double frame
  • Suitable for data module in HIFF-size
  • Screening shield to optimise EMC protection
Han<sup>®</sup> F+B

Han® F+B

  • "Easy-to-Clean" design
  • Certified by Ecolab
  • IP6K9K acc. to ISO 20653
  • Inserts for Data / Signal / Power / Hybrid
  • Han® 3 A inserts adaptable
Han<sup>®</sup> EMC/B hoods/housings

Han® EMC/B hoods/housings

  • Hoods/Housings for higher EMC requirements
  • Continuous shield connection using conductive surface
  • Metal hoods / housings with high shielding efficiency
  • Field of application: for sensitive interconnections that have to be shielded against electrical, magnetic or electro-magnetic interferences
  • Locking levers: Han-Easy Lock®
Han<sup>®</sup> HPR rear mounting

Han® HPR rear mounting

  • Hoods/housings for harsh outdoor environments
Han<sup>®</sup> HPR Enlarged

Han® HPR Enlarged

  • Option of connecting a cable for a functional earth externally
  • Hinged frames with additional PE connection for 6 respectively 8 Han-Modular® single modules
Han<sup>®</sup> HPR EasyCon

Han® HPR EasyCon

Ha-VIS eCon 2000 Advanced

Ha-VIS eCon 2000 Advanced

  • Unmanaged Plug & Play Gigabit Switch
  • Robust and miniaturised Ethernet interface ix Industrial®
  • Flat design for DIN rail or wall mounting
  • Optimised for imaging processes and other data intensive applications
  • Full Gigabit Ethernet Non Blocking switch architecture according to IEEE 802.3
HARTING T1 Industrial system cables

HARTING T1 Industrial system cables

HARTING ix Industrial<sup>®</sup> cable assemblies

HARTING ix Industrial® cable assemblies

HARTING Mini PushPull ix Industrial<sup>®</sup> cable assemblies

HARTING Mini PushPull ix Industrial® cable assemblies

  • Robust industrial design
  • 360° shielding
  • 5000 mating cycles
HARTING PushPull USB cable assemblies

HARTING PushPull USB cable assemblies

HARTING VarioBoot RJ45 cable assemblies

HARTING VarioBoot RJ45 cable assemblies

Fiber optic rotary joint

Fiber optic rotary joint

HARTING DualBoot RJ45 cable assemblies

HARTING DualBoot RJ45 cable assemblies

HARTING Industrial drag chain cable SF/UTP Cat. 6<sub>A</sub> PUR

HARTING Industrial drag chain cable SF/UTP Cat. 6A PUR

  • Suitable for generic cabling
  • For drag chain applications
  • Highly EMC resistant
DIN 41612, Type G

DIN 41612, Type G

  • Up to 64 contacts
  • 6 A per contact
Ha-VIS RFID Transponder

Ha-VIS RFID Transponder

  • Robust systems for industrial and railway
Dust protection cover for Han-Modular<sup>®</sup> docking frames

Dust protection cover for Han-Modular® docking frames

  • Thermoplastic
Han<sup>®</sup> 3 A Screw mounted housings

Han® 3 A Screw mounted housings

  • Size 3 A
Han<sup>®</sup> 1A Versatile compact connector series

Han® 1A Versatile compact connector series

  • Flexible connector system
  • Compact design saves space
  • "click and mate" assembly concept
Ha-VIS eCon 3000

Ha-VIS eCon 3000

  • Slim construction size
D-Sub Standard

D-Sub Standard

  • 9 to 50 poles
  • Thermoplastic or metal hoods/housings
  • Top/side entry
  • IP20 and IP65 / IP67
  • UL listed
Standard hoods/housings Han<sup>®</sup> B Panel feed through housing

Standard hoods/housings Han® B Panel feed through housing

  • Standard hoods/housings for industrial connectors
RJ45 / M12

RJ45 / M12

  • 8-wire system cables (X-coded) for Gigabit Ethernet
  • 4-wire system cable (D-coded) for Fast Ethernet
  • IP20 and IP65 / IP67
  • PVC, PUR
  • Overmoulded
D-Sub InduCom hoods

D-Sub InduCom hoods

  • 360° shielding
  • Low transfer impedance, best EMC behaviour
  • For D-Sub Standard, High Density and Mixed cable connectors
Accessories

Accessories

  • Protection covers
Cable connector

Cable connector

  • IDC connectors
  • With strain relief
  • Locking levers
  • Flat cable
System cables

System cables

Han<sup>®</sup> TC 350 PE

Han® TC 350 PE

Han<sup>®</sup> HPR EasyCon

Han® HPR EasyCon

  • Easy assembly
  • Excellent EMC characteristics
<i>har</i>-port

har-port

  • Compact and well-shaped charger in a timeless attractive design
  • Simple mounting
  • Robust industrial design
  • Practical accessories
Han<sup>®</sup> HC Modular

Han® HC Modular

  • Crimp contacts
  • Screw contacts
  • Frame
Hoods/Housings

Hoods/Housings

  • Shell housing
  • 360° shielding
  • Vibration and shock resistant
6-row connectors

6-row connectors

  • (complementary)
  • 72 or 144 contacts
Hoods/Housings

Hoods/Housings

Hoods/housings for industrial applications

Hoods/housings for industrial applications

  • Particularly robust for industrial applications
  • Suitable for applications according to protection class II
HARTING Cabinet Outlet RJ45

HARTING Cabinet Outlet RJ45

  • Simple mounting
  • Dust protection covers
  • Port identification
  • Angled output
<i>har</i>-port

har-port

  • Service interfaces
  • System cables
HARTING PushPull

HARTING PushPull

  • Connector set
  • for device side
  • Hoods/Housings
  • Accessories
PushPull Mini DisplayPort

PushPull Mini DisplayPort

  • 20-pin
  • DisplayPort 1.1
  • DisplayPort 1.2
FO cable

FO cable

  • Single- and multi-mode glass fibre cables
  • 2 and 4 fibres
  • IP20 and IP65 / IP67
  • Overmoulded
<i>har</i>-mik<sup>®</sup>

har-mik®

  • 14 to 100 poles
  • Contact spacing 1.27 mm
  • Bellows and Pin&Socket variants
  • Thermoplastic or metal hoods/housings
7/8"

7/8"

  • 3-pin (2+PE), 4-pin, 5-pin (4+PE)
  • Power applications
  • IP67
  • PVC, PUR
Han<sup>®</sup> M23 Contacts

Han® M23 Contacts

  • Crimp contacts
Han<sup>®</sup> Hoods and Housings

Han® Hoods and Housings

  • Hoods/Housings
  • Protection covers
Fiber optic rotary joint

Fiber optic rotary joint

  • Designed to connect a static and continuously rotating part by using a single optical fiber
  • Wear and maintenance free
  • Reduce of weight compared to copper cabling
  • Electromagnetic immunity
  • Lifetime: 500 million revolutions
Han<sup>®</sup> Full High Density module

Han® Full High Density module

  • Suitable for standard D-Sub crimp contacts
  • 44 % higher density
M12 Slim Design <i>HARAX</i><sup>®</sup> connection technology

M12 Slim Design HARAX® connection technology

  • Robust design
  • Simple mounting
  • Vibration and shock resistant
Modules with Han-Quick Lock<sup>®</sup> Termination

Modules with Han-Quick Lock® Termination

System cables

System cables

M12

M12

Device side

Device side

FO cable

FO cable

  • Single- and multi-mode glass fibre cables
  • Full breakout cable
  • 2 and 4 fibres
  • Particularly robust for industrial and outdoor applications
Han-Modular<sup>®</sup> Guide element

Han-Modular® Guide element

  • for Han-Modular® hinged frames
RJ45 / M12

RJ45 / M12

  • 8-wire system cables (X-coded) for Gigabit Ethernet
  • 4-wire system cable (D-coded) for Fast Ethernet
  • IP20 and IP65 / IP67
  • PVC, PUR
HMC Modules for 10,000 mating cycles

HMC Modules for 10,000 mating cycles

Modules

Modules

PushPull Hybrid

PushPull Hybrid

  • Combination of data and power
  • Half the number of interfaces
  • Ethernet Cat. 5
  • Power supply: 48 V / 5 A
Crimp contacts

Crimp contacts

Han-Eco<sup>®</sup> B Hoods/Housings

Han-Eco® B Hoods/Housings

  • Han-Eco® "click and mate" assembly concept
  • Can be mounted to back of electrical cabinet
  • Optimum protection against environmental influences
Hoods/housings for outdoor applications

Hoods/housings for outdoor applications

  • Light Hoods/housings of high-performance plastic
  • Resistance to corrosion and ozone: for outdoor use
#x20;

#x20;

M23 Contacts

M23 Contacts

  • Crimp contacts
Hoods/Housings

Hoods/Housings

RJ45

RJ45

  • 8-wire system cables for Gigabit Ethernet
  • 4-wire system cable for Fast Ethernet
  • IP20 and IP65 / IP67
  • PVC, PUR, LSHF (FRNC)
  • Overmoulded
QSFP

QSFP

  • acc. to SFF 8661
  • Data transmission up to 10 Gbit/s
  • AWG 30-24
  • High speed twisted pair cable
  • Moulded PCB
Han<sup>®</sup> M

Han® M

  • Bulkhead mounted housings
  • IP66
  • IP67
Hoods/Housings

Hoods/Housings

Han-Eco<sup>®</sup> punch units for hydraulic punch drivers

Han-Eco® punch units for hydraulic punch drivers

Protection cover

Protection cover

Shielded modules

Shielded modules

Han<sup>®</sup> HP Hoods/housings for harsh outdoor environments

Han® HP Hoods/housings for harsh outdoor environments

  • Screw lock made of high-quality stainless steel
  • IP68 / IP69 / IPX9K
  • Compatible with Han-Modular® components
  • Low construction for space saving
Modules with Screw Termination

Modules with Screw Termination

Device side

Device side

  • Adapter
  • PCB jack
Accessories

Accessories

Ha-VIS RFID Antennas

Ha-VIS RFID Antennas

  • Robust antennas for industrial and railway
  • Circular UHF antenna with wide range
  • High temperature version available
  • Railway version (under train installation) available
Ha-VIS RFID Reader

Ha-VIS RFID Reader

  • Robust systems for industrial and railway
Hoods/Housings

Hoods/Housings

PushPull Signal

PushPull Signal

  • 10-pin or 20-pin
  • for transmitting analogue, low-voltage signals and bus signals
  • IP65 / IP67
  • Shielded
Han<sup>®</sup> ES Press HMC

Han® ES Press HMC

  • Quick connection requires no tools
  • Han® ES Press plug-in jumpers
  • for High Mating Cycles
Han<sup>®</sup> PushPull Power L 4/0

Han® PushPull Power L 4/0

<i>har</i>-flex<sup>®</sup>

har-flex®

  • Fully automatic processing
  • Many application possibilities
  • Robust design
  • Between 6 and 80 poles in even numbered positions
  • Rated current: 1.5 A @ 80 °C (variant with 26 contacts)
Data

Data

Straight male connectors

Straight male connectors

  • Press-in termination
  • Guide pin
Han-Power<sup>®</sup> T

Han-Power® T

  • Energy distributor
  • 48 V / 12 A
  • With 3x HARTING PushPull Power
  • plug-and-play
Han<sup>®</sup> Megabit HMC Modules

Han® Megabit HMC Modules

HARTING RJ Industrial<sup>®</sup>

HARTING RJ Industrial®

  • Very robust full metal housing
  • Wide range IDC for solid and stranded wires from AWG 26 to AWG 22
  • No side cutter needed anymore – integrated cutting blades behind the IDC contacts cut the wires to the correct length
  • Very robust and patent pending cable fixing
  • Suitable for all PoE versions
Han<sup>®</sup> M23 Hoods/Housings

Han® M23 Hoods/Housings

  • All-purpose circular connector
  • Metal hoods / housings
  • Shielded
Industrial connectors Han<sup>®</sup>

Industrial connectors Han®

  • Particularly robust for industrial and outdoor applications
  • Data transmission via copper or FO
  • for different numbers of poles
  • Data transmission and power supply is possible in one cable
PushPull gender changer

PushPull gender changer

  • With PushPull
Ha-VIS RFID Transponder

Ha-VIS RFID Transponder

  • Robust systems for industrial and railway
Han<sup>®</sup> F+B Hoods/Housings for food+beverage industry

Han® F+B Hoods/Housings for food+beverage industry

  • "Easy-to-Clean" design
  • Certified by Ecolab
  • High degree of protection IP69 / IPX9K
Han-Modular<sup>®</sup> Pneumatic contacts

Han-Modular® Pneumatic contacts

  • for the transmission of compressed air
  • Female contacts with / without shut-off
Circular connectors M8

Circular connectors M8

  • D-coding
Angled female connectors

Angled female connectors

  • Press-in termination
  • Solder termination
  • Coding
<i>har</i>-flex<sup>®</sup>

har-flex®

  • THR solder-in posts
  • for reflow soldering
Modules with other termination techniques

Modules with other termination techniques

PCB connectors

PCB connectors

  • Available in multiple termination techniques
  • Straight and angled versions
  • Automatic mounting
Protection covers

Protection covers

  • 32 A
  • 32 B
  • With fixing cord
  • Thermoplastic
Cable connector

Cable connector

  • IDC connectors
  • With strain relief
  • Locking levers
  • Flat cable
M23 Contacts

M23 Contacts

  • Crimp contacts
Han<sup>®</sup> Pneumatic module

Han® Pneumatic module

SEK

SEK

  • 6 to 64 poles
  • Contact spacing 2.54 mm
  • UL listed
  • With strain relief
  • Polarisation key
M23 Hoods/Housings

M23 Hoods/Housings

  • Metal hoods / housings
  • Shielded
Device side

Device side

Ha-VIS RFID Solution Packages

Ha-VIS RFID Solution Packages

  • 4Logistics
  • 4MoldTracking
  • 4Rail
  • 4SMT
Han<sup>®</sup> HP Direct

Han® HP Direct

  • Protection covers
  • With fixing cord
Han<sup>®</sup> Guiding module

Han® Guiding module

  • Centring function with a very large inlet cone of +/- 4 mm
  • Significantly better handling compared to conventional guide pins/sockets
  • Ideal add-on when dealing with many mating cycles or inaccessible connectors
Crimping tool Han-Fast<sup>®</sup> Lock

Crimping tool Han-Fast® Lock

M12 Slim Design With crimp flange

M12 Slim Design With crimp flange

  • Robust design
  • IP65 / IP67
  • Vibration and shock resistant
  • Crimp termination
Han<sup>®</sup> HC Individual for higher currents

Han® HC Individual for higher currents

  • Variable high-current interface
  • Stackable due to modular design
  • 2000 V / 350 A
  • Suitable for HC 350 crimp contacts
Han<sup>®</sup> HP Direct for direct electrical cabinet installation

Han® HP Direct for direct electrical cabinet installation

  • Screw lock made of high-quality stainless steel
  • Particularly robust for industrial and outdoor applications
Han<sup>®</sup> M23 All-purpose circular connector

Han® M23 All-purpose circular connector

  • Metal hoods / housings
  • Shielded
PushPull cable connectors

PushPull cable connectors

  • With PushPull
Modules with Axial Screw Termination

Modules with Axial Screw Termination

HMC Modules for 10,000 mating cycles

HMC Modules for 10,000 mating cycles

M12

M12

  • All-purpose use
  • for cable and device sides
  • Data transmission up to 10 Gbit/s
M12 Transformer

M12 Transformer

  • Vibration and shock resistant
  • D-coding
  • X-coding
  • Reflow soldering termination (SMT)
Han-Modular<sup>®</sup>

Han-Modular®

  • Hinged frame
  • Modules
  • Docking frame
Device side

Device side

Ethernet switches Ha-VIS eCon

Ethernet switches Ha-VIS eCon

  • for assembly on DIN rails in electrical cabinets
  • plug-and-play
  • Power over Ethernet (PoE)
HARTING T1 Industrial

HARTING T1 Industrial

  • Internationally standardised mating face acc. to IEC 63171-6 (former IEC 61076-3-125)
  • For the construction of future-proof and standardised Single Pair Ethernet (SPE) communication networks with standardised cabling according to ISO / IEC 11801 and TIA 42
  • Designed for industrial applications up to M3I3C3E3 environmental conditions
  • Meets all IEEE 802.3 requirements for SPE
  • Robust industrial design with 360 ° shielding, locking lever protection and high mating cycles
Expanded beam

Expanded beam

  • Shock protected by rubber grip ring, dust cap and boot
  • Hermaphroditic design - always the correct mating face where needed
  • Easy link extension by connecting multiple, identical cable assemblies
  • Robust design
M23 All-purpose circular connector

M23 All-purpose circular connector

  • Good EMC characteristics
  • Data
  • Signal
  • Power
Han<sup>®</sup> PushPull (V14)

Han® PushPull (V14)

  • HARTING PushPull (V4) technology
  • 360° shielding
  • Field assembly
  • No side cutter needed anymore – integrated cutting blades behind the IDC contacts cut the wires to the correct length
  • Wide range IDC for solid and stranded wires from AWG 26 to AWG 22
HARTING sea cable

HARTING sea cable

  • Especially suitable for data cabling on and below deck of civil ships as well as other offshore applications
  • Flame retardant, halogen free and RoHS compliant
  • Oil and UV resistant
M8

M8

D-Sub High Density

D-Sub High Density

  • 15 to 78 poles
  • Thermoplastic or metal hoods/housings
  • Top/side entry
  • IP20 and IP65 / IP67
  • UL listed
PCB connectors

PCB connectors

  • Two-part PCB terminal
  • In combination with a base strip
Han-Brid<sup>®</sup> Quintax 3 A

Han-Brid® Quintax 3 A

  • Possibility to terminate shielded four/eight wires conductors (2 pair STP)
  • Possibility to terminate Coax cable with large diameter
  • Suitable for all 4-wire bus systems
  • snap-fit
LT 2.0 series

LT 2.0 series

  • Large working memory
  • "On metal" use is possible
  • Resistant to chemicals
Han<sup>®</sup> Ex for explosion hazardous enviroments

Han® Ex for explosion hazardous enviroments

  • Inserts
  • Hoods/Housings
Ha-VIS eCon 2000

Ha-VIS eCon 2000

  • Low construction type
Service interfaces

Service interfaces

Hoods/housings for outdoor applications

Hoods/housings for outdoor applications

  • Resistance to corrosion and ozone: for outdoor use
Cable connector

Cable connector

Expanded beam

Expanded beam

  • Shock protected by rubber grip ring, dust cap and boot
  • Hermaphroditic design - always the correct mating face where needed
  • Easy link extension by connecting multiple, identical cable assemblies
  • Robust design
Han<sup>®</sup> M23 All-purpose circular connector

Han® M23 All-purpose circular connector

  • Data
  • Signal
  • Power
PushPull

PushPull

  • Data transmission up to 10 Gbit/s
  • Double-sided IP65 / IP67 protection
  • Simple handling by HARTING PushPull (V4)
Power up to 200Amp

Power up to 200Amp

Accessories

Accessories

<i>har</i>-mik<sup>®</sup>

har-mik®

  • 14 to 100 poles
  • Contact spacing 1.27 mm
  • Bellows and Pin&Socket variants
  • Thermoplastic or metal hoods/housings
Han<sup>®</sup> Q 5/0

Han® Q 5/0

  • 32 coding options without loss of contacts
  • Crimp termination
  • Mating compatible to the standard Han® Q 5/0 insert
Power 40Amp

Power 40Amp

Crimp contacts

Crimp contacts

PushPull XS SFP

PushPull XS SFP

  • Hoods/Housings
  • Inserts
  • System cables
Cable

Cable

  • High performance bulk cables
  • Ethernet and EtherRail®
Modules

Modules

M23 Power

M23 Power

  • Good EMC characteristics
  • Signal
  • Power
  • Crimp termination
Han<sup>®</sup> 24 HPR EasyCon short

Han® 24 HPR EasyCon short

  • Devided hood/housing ensures a user-friendly assembly process and simple inspection of the cable and screen connections on the "open system"
Han-Modular<sup>®</sup> Flexbox

Han-Modular® Flexbox

  • Fast, easy and secure assembly
  • Flexible building block system
  • Suitable for Han-Modular® modules
Modules

Modules

Plug-in jumpers

Plug-in jumpers

Power

Power

Han<sup>®</sup> F+B

Han® F+B

  • "Easy-to-Clean" design
  • Certified by Ecolab
  • Inserts for Data / Signal / Power / Hybrid
  • Han® 3 A inserts adaptable
  • IP6K9K acc. to ISO 20653
Distribution boxes / sensor actuator boxes

Distribution boxes / sensor actuator boxes

  • Passive sensor actuator boxes
  • Ports: M8 or M12
  • Number of ports: 4, 8 or 10
  • Connection technology: pre-assembled cable, pluggable cable, M23, M16, M12
  • IP67 or IP68
LTE (2G/3G/4G)

LTE (2G/3G/4G)

PushPull Mini DisplayPort

PushPull Mini DisplayPort

  • DisplayPort 1.1
  • DisplayPort 1.2
  • Assembled and tested system cables
Crimp contacts

Crimp contacts

<i>har</i>-flex<sup>®</sup>

har-flex®

  • Miniature connector
  • Contact spacing 1.27 mm
  • 2 rows
  • 6 to 100 contacts
  • Particularly robust for industrial applications
Accessories

Accessories

  • Protection covers
  • Crimping tool
Distribution boxes

Distribution boxes

  • Distribution boxes / sensor actuator boxes
PCB adapter

PCB adapter

  • In the Han® 40 EEE crimp insert
Hoods/Housings

Hoods/Housings

M12 PushPull Angled

M12 PushPull Angled

  • Robust design
  • IP65 / IP67
  • Crimp termination
  • Vibration and shock resistant
Accessories

Accessories

  • Protection covers
Ha-VIS RFID Antennas

Ha-VIS RFID Antennas

  • Robust antennas for industrial and railway
Mini Coax

Mini Coax

  • 6-pin or 8-pin
  • Data transmission up to 2.5 Gbit/s
  • IP65 / IP67
  • Overmoulded
  • Shielded
Current transformer

Current transformer

  • Current transformer for measurement and tests
  • Best accuracy classes
  • Suitable for invoicing purposes
  • Can be calibrated
HARTING MICA

HARTING MICA

  • HARTING MICA Wireless
  • HARTING MICA 2
  • Starter kit
Screw contacts

Screw contacts

Circular connectors

Circular connectors

  • M8
  • M12
  • Panel feed through
  • Accessories
  • Tools
Han<sup>®</sup> ID CAN module

Han® ID CAN module

DIN 41612

DIN 41612

  • Contact spacing 2.54 mm
  • acc. to IEC 60603-2
Module mit Cage Clamp Termination

Module mit Cage Clamp Termination

PT series

PT series

  • High degree of protection IP69 / IPX9K
  • "On metal" use is possible
  • Resistant to chemicals
  • Can be used in autoclave
Han<sup>®</sup> PushPull Power L

Han® PushPull Power L

  • Protection cover
Cable assemblies

Cable assemblies

Han<sup>®</sup> HC Modular 250 Enlarged

Han® HC Modular 250 Enlarged

Han<sup>®</sup> M23 All-purpose circular connector

Han® M23 All-purpose circular connector

  • Good EMC characteristics
  • Data
  • Signal
  • Power
Cable connector

Cable connector

Han<sup>®</sup> TC 250

Han® TC 250

Accessories

Accessories

  • Crimp flange
  • Crimp ferrule
Copper cable

Copper cable

  • Profile-specific copper cables for data transmission
  • Multi-wire combinations of individual wires
  • Various insulating materials used for the sheath
  • Industrial, outdoor and railway applications
  • UL listed
Han-Port<sup>®</sup> combi inserts

Han-Port® combi inserts

  • Sockets
M12

M12

  • 3 to 12 poles
  • A-, B-, D-, L- and X-coded
  • IP65 / IP67
  • PVC, PUR
  • Overmoulded
SFP

SFP

  • acc. to SFF 8432
  • Data transmission up to 40 Gbit/s
  • AWG 30-24
  • High speed twisted pair cable
  • Moulded PCB
Sliding frame

Sliding frame

R 23 Hoods/housings for R 23 inserts

R 23 Hoods/housings for R 23 inserts

  • All-purpose circular connector
  • Metal hoods / housings
  • Shielded
Hoods/Housings

Hoods/Housings

D-Sub InduCom hoods

D-Sub InduCom hoods

  • 360° shielding
  • Low transfer impedance, best EMC behaviour
  • For cable diameter 5.0 up to 14.0 mm
Inserts

Inserts

Accessories

Accessories

  • Strain reliefs
M23 Inserts

M23 Inserts

  • Data
  • Signal
  • Power
Han-Smart<sup>®</sup> The intelligent connector

Han-Smart® The intelligent connector

  • Data processing inside the connector
  • Miniaturisation
  • for Industry 4.0
Han<sup>®</sup> Gigabit module

Han® Gigabit module

  • Cat. 7A
M12 Power L

M12 Power L

  • L-coding
  • PCB adapter
  • Housing
  • Cable connector
Han<sup>®</sup> K 32/55

Han® K 32/55

  • Inserts
  • Crimp contacts
PCB connectors

PCB connectors

Hoods/housings for industrial applications

Hoods/housings for industrial applications

  • Light Hoods/housings of high-performance plastic
  • Particularly robust for industrial applications
Han<sup>®</sup> HPR

Han® HPR

  • Hoods/Housings
  • Frame
  • Protection covers
  • Accessories
WLAN

WLAN

Current sensors

Current sensors

  • Open loop
  • Industrial version
Han DD<sup>®</sup> Inserts

Han DD® Inserts

  • 28-pin
  • 40-pin
PCB connectors

PCB connectors

IT series

IT series

  • Very compact construction type
  • "On metal" use is possible
preLink<sup>®</sup> M12

preLink® M12

  • Screw mounted housings
  • PCB jack
#x20;

#x20;

ETB series

ETB series

  • Wireless connection of sensors
  • RFID data and sensor value transmission
  • "On metal" use is possible
  • Maintenance-free passive technology
M23 Inserts

M23 Inserts

  • Up to 19 contacts
  • Crimp termination
  • Solder termination
  • PCB solder termination
Accessories

Accessories

  • Protection covers
  • Crimping tool
Modules with Crimp Termination

Modules with Crimp Termination

Han-Modular<sup>®</sup> Switch US4

Han-Modular® Switch US4

Inserts

Inserts

Signal

Signal

Cable assemblies

Cable assemblies

  • 6 to 100 poles
  • Contact spacing 1.27 mm
  • Strain relief is available
High Voltage

High Voltage

Accessories

Accessories

M23 Hoods/Housings

M23 Hoods/Housings

  • Metal hoods / housings
  • Shielded
Han<sup>®</sup> PE module

Han® PE module

Han<sup>®</sup> M23 Inserts

Han® M23 Inserts

  • Crimp termination
  • Solder termination
  • PCB solder termination
Tools

Tools

MICA Energy

MICA Energy

  • High degree of protection IP67
  • Modbus RTU and S0 ports
  • Modbus TCP over Ethernet
  • Process or visualize directly on the device
  • Forward relevant information
HARTING ix Industrial<sup>®</sup>

HARTING ix Industrial®

  • Compact design saves space
  • Robust design
  • Data transmission up to 10 Gbit/s
  • for High Mating Cycles
  • Vibration and shock resistant
RJ45 Female module

RJ45 Female module

Han<sup>®</sup> CGM Cable glands

Han® CGM Cable glands

  • Metal
  • Thermoplastic
  • IP68 / IP69 / IPX9K
Crimp contacts

Crimp contacts

Han<sup>®</sup> K 6/12

Han® K 6/12

  • Combination of signal and power in one connector
  • Crimp termination for power and signal area
  • 16 coding options
  • + 12 additional signal contacts
Han<sup>®</sup> ES Press

Han® ES Press

  • Inserts
  • Plug-in jumpers
PCB adapter and housings

PCB adapter and housings

  • Variants with PushPull
  • SMT/THR versions
Han<sup>®</sup> HP Hoods/housings for rough environments

Han® HP Hoods/housings for rough environments

  • Robust housing
  • Compact design saves space
  • Excellent EMC characteristics
  • Screw lock made of high-quality stainless steel
  • Internal seal
Tools

Tools

  • Han-Eco® punch units
  • Crimping tool
Modules

Modules

Han<sup>®</sup> High density shielded module

Han® High density shielded module

  • 360° shielding
  • High packing density
USB

USB

  • Data transmission up to 5 Gbit/s
  • According to USB 2.0 / USB 3.0 specification
Han<sup>®</sup> 1A Small connector for industrial applications

Han® 1A Small connector for industrial applications

  • All-purpose use
  • Light Hoods/housings of high-performance plastic
  • "click and mate" assembly concept
  • Scalable IP-protection from IP20 to IP65
Ha-VIS RFID RF-R300 Reader

Ha-VIS RFID RF-R300 Reader

  • 2 external antenna connections
  • Ideal for medium-range distances
  • Efficient use with PoE option
  • Ideal for light industrial applications
Power up to 200Amp

Power up to 200Amp

Hybrid

Hybrid

  • Data transmission and power supply in one cable
  • Data transmission via copper or FO
  • for different numbers of poles
  • IP65 / IP67
  • Operating voltage up to 300 V AC/DC
Inserts

Inserts

Ha-VIS eCon 3000 Media converter

Ha-VIS eCon 3000 Media converter

  • Slim construction size
  • for vertical installations in electrical cabinets
  • plug-and-play
  • Power over Ethernet (PoE)
Hybrid cable

Hybrid cable

  • Data transmission and power supply in one cable
  • Data transmission via copper or FO
  • Minimal installation effort
  • Particularly robust for industrial and outdoor applications
  • for different numbers of poles
Han<sup>®</sup> K 9/9/18 Crimp

Han® K 9/9/18 Crimp

  • Han® C power contacts
  • Han E® power contacts
  • Han D® signal contacts
  • Crimp termination for power and signal area
Han<sup>®</sup> F+B for food+beverage industry

Han® F+B for food+beverage industry

  • Combination of signal and power in one connector
  • Power range up to 500 V / 16 A
  • Control range up to 250 V / 10 A
Steel ID

Steel ID

  • Exceptionally robust design
  • Ideal for labelling crane chains
  • Transponder embedded in metal
Han-Max<sup>®</sup>

Han-Max®

  • Data transmission up to 10 Gbit/s
  • Quick connection requires no tools
Docking frame

Docking frame

  • Metal
Hoods M25

Hoods M25

  • Han A®
  • Han® M
  • Han® EMC
Ha-VIS RFID RF-R400 Reader

Ha-VIS RFID RF-R400 Reader

  • applicable in rough, metal-containing industrial environments
  • robust aluminium housing
  • high transponder population
  • very fast multiplexing speed
  • robust M12 and M8 connectors
for SMT reflow soldering

for SMT reflow soldering

M12 Slim Design

M12 Slim Design

  • Crimp termination
  • Shielded
Ha-VIS RFID Middleware App Appliance

Ha-VIS RFID Middleware App Appliance

  • Easy integration of UHF / RAIN RFID in every project
  • No programming effort
  • Reliable standardised solution
  • Reading and writing tag information
  • Various filter and aggregation options
M8

M8

  • 3-pin or 4-pin
  • Signal Transmission
  • IP65 / IP67
  • PVC, PUR
  • Overmoulded
R 23 All-purpose circular connector

R 23 All-purpose circular connector

  • 250 V / 10 A
  • Up to 19 contacts
  • Available in multiple termination techniques
  • Suitable for hoods/housings of series R 23
Shielded modules

Shielded modules

<i>har</i>-flex<b>i</b>c<b>o</b>n<sup>®</sup>

har-flexicon®

  • for SMT reflow soldering
Han<sup>®</sup> HPR Frame

Han® HPR Frame

  • for Han-Modular®
  • in the Han® 24 HPR EasyCon
  • in the Han® 24 HPR enlarged
<i>har</i>-flex<sup>®</sup>

har-flex®

  • Miniature connector
  • Contact spacing 1.27 mm
  • 2 rows
  • 6 to 100 contacts
  • Particularly robust for industrial applications
Han-Modular<sup>®</sup> Twin

Han-Modular® Twin

Accessories

Accessories

Energy distributor Han-Power<sup>®</sup> T with 5x Han<sup>®</sup> Q 4/2

Energy distributor Han-Power® T with 5x Han® Q 4/2

  • Overload and short-circuit protection measures are the responsibility of the user (electrician).
  • Maximum let-through energy of the short-circuit protection device (I²t) shall not exceed 211600 A²s.
  • Assembly and installation must be carried out by a qualified electrician.
Hinged frame

Hinged frame

  • with stainless steel spring
Han<sup>®</sup> Gigabit HMC Modules

Han® Gigabit HMC Modules

Han<sup>®</sup> EMC/B Panel feed through housing

Han® EMC/B Panel feed through housing

  • Excellent EMC characteristics
  • Vibration and shock resistant
  • Robust design
  • IP65
Connector

Connector

preLink<sup>®</sup>

preLink®

  • Connector
  • System cables
With robust THR hold downs THR connection

With robust THR hold downs THR connection

Ha-VIS RFID Reader

Ha-VIS RFID Reader

  • Robust systems for industrial and railway
Han-INOX<sup>®</sup> Hoods/Housings

Han-INOX® Hoods/Housings

  • Extremely resistant to chemicals and other aggressive influences
  • Made completely from high-quality stainless steel
  • Size 3 A
System cables

System cables

Han<sup>®</sup> HPR

Han® HPR

  • Protection covers
  • Han® 3 A
FT series

FT series

  • High read ranges on metal
  • Washable, resistant to chemicals
  • "On metal" use is possible
  • Washable, resistant to chemicals
Accessories

Accessories

  • Strain reliefs
Cable assemblies

Cable assemblies

  • Standard and customised cable assemblies
  • Other cable lengths on request!
Customised solutions

Customised solutions

Han-Power<sup>®</sup> T With 3x HARTING PushPull Power

Han-Power® T With 3x HARTING PushPull Power

Power 40Amp

Power 40Amp

Multiphase test connector

Multiphase test connector

Inserts

Inserts

Han<sup>®</sup> B Split Hood

Han® B Split Hood

  • Allows the entry of pre-assembled cables into a switch cabinet
  • High pole cable entry seals for up to 10 different cables
Han<sup>®</sup> HPR slim

Han® HPR slim

  • Compact design saves space
<i>har</i>-flex<sup>®</sup>

har-flex®

  • 6 to 100 poles
  • Contact spacing 1.27 mm
  • Strain relief is available
Connector

Connector

Han<sup>®</sup> Q 1/0 Axial screw protected

Han® Q 1/0 Axial screw protected

  • 1-pin
  • Size 3 A
  • Current-carrying capacity > 100 A
  • Straight and angled versions
High Voltage

High Voltage

Panel feed through

Panel feed through

<i>har</i>-link<sup>®</sup>

har-link®

  • 10-pin
  • Shielded
  • Data transmission up to 2 Gbit/s
  • acc. to IEC 61076-4-113
  • UL listed
Multiphase test connector

Multiphase test connector

RJ45 Female module

RJ45 Female module

Cable assemblies

Cable assemblies

Han<sup>®</sup> HMC Special hoods and housings for high mating cycles

Han® HMC Special hoods and housings for high mating cycles

  • 06 B
  • Durable locking elements ensure more than 10,000 mating cycles
  • A proven hoods/housings made of powder-coated die-cast aluminium
  • IP65
  • Locking levers: Han-Easy Lock®
Frame

Frame

All Products

0
Compare products

Topics & Trends