US Careers Newsletter eShop

myHARTING Cockpit
- myHARTING
  ID: 0000000000
myHARTING Cockpit

My account settings
Logout
myHARTING

ID: 0000000000

(Autologout in 29 Min 59 Sek)
myHARTING Login

Configurators

Products & Solutions
Markets
Trends
News Center
Service
Company
Where-to-Buy
myHARTING
Digital Tools
United States (English)

The configurator is not optimized for your screen resolution

To enable our configurator to provide complex solutions in simple, clear steps, a screen width of more than 1,000 px is required.

Explore HARTING

Male connector

Please make your choice for the following attributes. You can use the buttons ‘Prev’ and ‘Next’ to switch between the attributes.

Cancel Reset selection Show result list (0)

Attributes - Male connector

Connector size
Performance level
Profile
Termination
Termination length
Moulding
Lever
P.C.B. retention clip
Color
Packaging

Connector size - Make your choice.

6 contacts

10 contacts

14 contacts

16 contacts

20 contacts

26 contacts

34 contacts

40 contacts

50 contacts

60 contacts

64 contacts

Performance level - Make your choice.

AU-0.76µm [30µ Inch]

Performance level 2

Performance level 3

> 0.76um Au (30 u inch) on request

acc to DIN EN 60603-13, 250 mating cycles - 4 days gas test

acc. to DIN EN 60603-13, Part 2 50 mating cycles - No gas test

Profile - Make your choice.

Standard connector

Low-profile male header

This connector is recommended for conventional application.

Particularly suited when space saving is required.

Termination - Make your choice.

Angled solder pin

Angled wrap post

Straight press-in pin

Straight solder pin

Straight solder pins, kinked

Straight wrap post

Solder pin for P.B.C hole Ø 0,9 mm, acc. to IEC 52141

length: 15 mm, 0,6 x 0,6 mm for a PCB hole diameter : 0,9 mm

Compliant press-in termination for Ø 0,94 - 1,06 mm

Solder pins for pcb connections Ø 1 +/- 0.1 mm as per IEC 60603-13

pcb thickness from 1.5 to 1.94 mm through holes Ø 0.8 to Ø 0.95 mm Max. insertion force = 125 N; Min. retention force = 6 N

length: 15 mm, 0,6 x 0,6 mm for a PCB hole diameter : 0,9 mm

Termination length - Make your choice.

2.9 mm

4.5 mm

5.5 mm

15.0 mm

Compatible for PCB thickness up to 1,6 mm

Compatible for PCB thickness up to 3,2 mm

Moulding - Make your choice.

Standard Material

High Temperature Material

For any conventional termination process excluding solder reflow

PCT UL 94-V O; compatible with surface mount assembly Temperature range -55 °C... + 125 °C during reflow soldering max. +240 °C for 60 s

Lever - Make your choice.

Long levers

Short levers

Without Levers

Male connectors with long levers are designed for female connectors with strain relief clamp; levers provide latching security between connectors.

Male connectors with short levers are designed for female connectors without strain relief clamp; levers provide latching security between connectors.

Male connectors without levers can be used when no locking security is required after mating it with female connectors. Levers can be added later

P.C.B. retention clip - Make your choice.

Without retention clip

With retention clip

Retention clips hold the connector on PCB before soldering process

Color - Make your choice.

Beige

Black

Packaging - Make your choice.

Carton

Tape & Reel

Show found products (1,062)

eShop

You can go directly to the shop here, and get detailed information about all HARTING products.
Distributors

You can find all global dealers and distributors of HARTING products here.
Contact

You can ask us questions about products and solutions or give feedback about our website here.

HARTING Newsletter

Imprint Privacy Policy Cookie Policy Terms of Use Customer Information