Han Q1/0-M/M with housing (HBMA, black)

Image is for illustration purposes only. Please refer to product description.

Han Q1/0-M/M with housing (HBMA, black)

Connector sets, Axial screw termination, Male, Rated current: ‌100 A, Contacts: 1, Copper alloy, Silver plated, Bulkhead mounted housing, Size: 3 A, Single locking lever, Material: Zinc die-cast, Powder-coated

Part number:  09 12 001 2661

  • Category Connector sets
  • Series Han® Q
  • Identification 1/0 protected
  • Type of hood/housing Bulkhead mounted housing
  • Termination method Axial screw termination
  • Gender Male
  • Locking type Single locking lever
  • Size 3 A
  • Number of contacts 1
  • Details
    The described connectors are connectors without breaking capacity (COC) according to IEC 61984 and must not be coupled or decoupled under electrical load during use as intended!
    Only cables with protection class 2 shall be used!
    The axial screw termination is suitable for fine stranded wires according to EN 60228 class 5. Using alternative cables have to be tested separately.
    For the assembly within bulkhead mounted housings the described installation conditions of the data and type sheets must be respected.
    For the connection of the conductor into the axial screw contact use hex key with A/F 4.
  • Rated current ‌ 100 A
  • Rated voltage 400 V
  • Rated impulse voltage 6 kV
  • Pollution degree 3
  • Insulation resistance >1010 Ω
  • Contact resistance ≤ 0.3 mΩ
  • Limiting temperature -40 ... +125 °C
  • Mating cycles ≥ 500
  • Material (insert) Polycarbonate (PC)
  • Colour (insert) RAL 7032 (pebble grey)
  • Material (contacts) Copper alloy
  • Surface (contacts) Silver plated
  • Material (hood/housing) Zinc die-cast
  • Surface (hood/housing) Powder-coated
  • Colour (hood/housing) RAL 9005 (jet black)
  • Material (seal) NBR
  • Material (locking) Steel
  • Surface (locking) Zinc plated
  • Material flammability class acc. to UL 94 V-0
  • RoHS compliant with exemption
  • RoHS exemptions
    6(a) / 6(a)-I: Lead as an alloying element in steel for machining purposes and in galvanised steel containing up to 0,35 % lead by weight / Lead as an alloying element in steel for machining purposes containing up to 0,35 % lead by weight and in batch hot dip galvanised steel components containing up to 0,2 % lead by weight
    6(c): Copper alloy containing up to 4 % lead by weight
  • ELV status compliant with exemption
  • China RoHS 50
  • REACH Annex XVII substances No
  • REACH ANNEX XIV substances No
  • REACH SVHC substances Yes
  • REACH SVHC substances Lead
  • Specifications
    EN 60664-1
    IEC 61984
  • Packaging size 1
  • Net weight 95.9 g
  • Country of origin Germany
  • European customs tariff number 85366990
  • eCl@ss 27440101 Rectangular connectors (set)

Topics & Trends