Close
Tools
Filters
  • Type of tool
    Select a value Reset filter
    • 8-indent crimping tool
      1
    • Adapter
      1
    • Adjustment gauge
      2
    • Assembly tool
      28
    • Base plate
      1
    • Battery crimping tool set
      1
    • Battery hydraulic punch driver
      1
    • Bench press
      2
    • Bit ¼in as a spare part for guiding pins and bushes
      1
    • Bottom tool
      14
    • Bottom tool carrier
      2
    • Cable cutter
      1
    • Cable test adapter
      1
    • Cabling tool for termination
      7
    • Centering plate female
      2
    • Check gauge
      2
    • Crimp die
      22
    • Crimping insert
      39
    • Crimping machine BK
      1
    • Crimping machine TC-C01
      3
    • Crimping machine TK-M
      1
    • Crimping tool
      3
    • Dynamometric screwdriver
      7
    • Foot switch
      1
    • Guide frame
      1
    • Han® VDE Screw Driver Set
      1
    • Hand crimping tool
      40
    • Hand hydraulic crimping tool
      2
    • Hexagonal driver
      6
    • Hexagonal head screwdriver
      1
    • Hexagonal scewdriver
      1
    • Hydraulic hand punch driver
      1
    • Insert
      15
    • Insert blocks
      7
    • Insert top tool
      2
    • Insertion / removal tools
      5
    • Interchangeable blades
      1
    • Interchangeable unit
      6
    • Locator
      38
    • One click cleaner
      2
    • PCB
      4
    • Pliers
      2
    • Pneumatic crimping tool
      2
    • Pneumatic press
      1
    • Polishing paper
      3
    • Polishing tool
      6
    • Polishing tool HP duplex
      1
    • Press-out tool
      4
    • Punching units
      21
    • Quick change tool
      7
    • Removal tool
      47
    • Replacement-tip
      4
    • Screw driver
      2
    • Screw driver set Slimline
      1
    • Service case
      1
    • Service crimping tool
      1
    • Slider
      2
    • Spacer block
      6
    • Spare blade cassette
      1
    • Spare part
      1
    • Spare part box
      1
    • Stripping blade set
      3
    • Stripping tool
      3
    • Support block
      1
    • Table fixing
      1
    • Tool insert
      3
    • Tool-kit
      2
    • Top tool
      67
    • Top tool carrier
      2
    • Torque set
      4
    • Torque tool
      1
    • Wire cutter
      1
    • Wire fixing rubber
      1
  • Description of the tool
    Select a value Reset filter
    • 10 poles
      3
    • 14 poles
      3
    • 16 poles
      2
    • 20 poles
      2
    • 26 poles
      3
    • 34 poles
      2
    • 4 indent crimp in acc. to MIL 22 520/2-01
      2
    • 40 A contact
      2
    • 40 poles
      2
    • 50 poles
      2
    • 64 poles
      3
    • Adapter 3/8in
      3
    • Angled
      2
    • BC / har-bus® 64
      3
    • Bit ¼in
      2
    • Bottom shield
      3
    • D-Sub
      3
    • DIN 41612
      8
    • FC 1
      3
    • FC 2
      4
    • FC 3
      4
    • HARTING PushPull (V4) Power
      2
    • Han D®
      9
    • Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224)
      3
    • Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227)
      2
    • Han E®
      10
    • Han E®: 0.14 ... 4 mm²
      3
    • Han E®: 0.5 ... 4 mm²
      2
    • Han-Modular®
      4
    • Han-Yellock®
      7
    • Han-Yellock®: 0.14 ... 4 mm²
      2
    • Han® C
      8
    • Han® C: 1.5 ... 4 mm²
      5
    • Han® C: 4 ... 10 mm²
      3
    • Han® F+B
      3
    • Han® P
      2
    • Insertion tool for single male press-in contacts
      2
    • Metal
      2
    • Modular insert
      10
    • Narrow
      2
    • Only for short posts and PCB thickness < 1.6 mm and without guide frame
      3
    • Punching pressure: 60 kN
      2
    • Relay contacts
      2
    • SC, F-SMA F-ST
      2
    • Spare part
      16
    • Suitable for D-Sub and SEK
      2
    • To produce panel cut outs for connectors
      2
    • With grip
      2
    • With upper shield
      8
    • har-bus® 64
      3
    • acc. to DIN 41626
      2
    • acc. to DIN 46228
      2
    • for 120 kN tool
      11
    • for 250 bandoliered contacts
      3
    • for 3U
      2
    • for 60 kN tool
      6
    • for D-Sub crimp contact
      2
    • for D-Sub mixed
      3
    • for HARTING ix Industrial® to assemble the single wire to the IDC and the cable strain relief crimping
      2
    • for Han-Fast® Lock single contact
      4
    • for Han-Yellock® modules and frames
      2
    • for M23 signal contacts
      2
    • for M8
      2
    • for SEK male low-profile connectors
      14
    • for SEK standard connectors
      10
    • for har-bus 64® female connectors
      4
    • for har-bus® HM Power
      2
    • for angled female connectors
      13
    • for angled male connectors
      2
    • for angled shielded female connectors
      12
    • for assembly of D-Sub hoods
      2
    • for axial screw
      7
    • for circular inserts
      2
    • for coaxial contact
      2
    • for contact replacement in male and female connectors
      2
    • for contacts BC / har-bus® 64
      2
    • for contacts FC 1, FC 2 and FC 3
      3
    • for crimping tool 09 99 000 0888
      3
    • for discrete wire termination
      8
    • for flange
      3
    • for hydraulic punch drivers
      21
    • for individual DIN 41612 contacts
      6
    • for individual contacts
      4
    • for ix Industrial® assembly tool
      3
    • for part number 09 99 000 0509
      4
    • for part number 09 99 000 0647
      35
    • for part number 09 99 000 0990
      5
    • for single D-Sub standard contacts
      3
    • for straight male connectors
      31
    • for type A
      8
    • for type AB
      21
    • for type B
      22
    • for type C
      6
    • for type D
      7
    • for type E
      7
    • for use with female connectors
      11
    • for use with male connectors
      9
    • for wire end ferrules
      4
    • incl. insert
      4
    • incl. locator
      4
  • Field of application
    Select a value Reset filter
    • Recommended for field use
      2
    • Recommended for production lines
      6
    • Recommended for stationary use in production lines
      18
    • for individual, turned male and female contacts
      9
    • for more than 25,000 crimping operations per year
      15
    • for stamped contacts on reel (250 ... 10.000)
      8
    • up to 1,000 crimping operations per year
      3
    • up to 10,000 crimping operations per year
      2
    • up to 25,000 crimping operations per year
      3
    • up to 3,000 crimping operations per year
      1
Show all filters
488 products (of 488)
4/17
New products - ascending
M12-Torque key SW13 (0,6Nm)
Dynamometric screwdriver
M12-Torque key SW13 (0,6Nm)
Article. No: 09 99 000 0382
for M12-S
Wrench size: 13
Add to Wishlist
Removal Tool Han HV Double Module 5kV
Removal tool
Removal Tool Han HV Double Module 5kV
Article. No: 09 99 000 0327
for the Han® HV Double module
Add to Wishlist
REMOVAL JACKET
Replacement-tip
REMOVAL JACKET
Article. No: 09 99 000 0320
DIN 41612, for removal tool 09 99 000 0174
Add to Wishlist
GDS A-B/C CRIMPING TOOL ON REEL
Hand crimping tool
GDS A-B/C CRIMPING TOOL ON REEL
Article. No: 09 99 000 0248
for 500 bandoliered contacts, BC / har-bus® 64
Conductor cross-section: 0.09 ... 0.5 mm²
Add to Wishlist
Crimp die 25mm² for 120 kN tool
Crimp die
Crimp die 25mm² for 120 kN tool
Article. No: 09 99 000 0864
for 120 kN tool
Conductor cross-section: 25 mm²
Add to Wishlist
Crimp die 16mm² for 120 kN tool
Crimp die
Crimp die 16mm² for 120 kN tool
Article. No: 09 99 000 0863
for 120 kN tool
Conductor cross-section: 16 mm²
Add to Wishlist
Ferrule Crimp tool 10mm2
Hand crimping tool
Ferrule Crimp tool 10mm2
Article. No: 09 99 000 0374
for wire end ferrules
Conductor cross-section: 10 mm²
Add to Wishlist
Crimp die 70mm² for 60 kN tool
Crimp die
Crimp die 70mm² for 60 kN tool
Article. No: 09 99 000 0857
for 60 kN tool
Conductor cross-section: 70 mm²
Add to Wishlist
Crimp die 10mm² for 120 kN tool
Crimp die
Crimp die 10mm² for 120 kN tool
Article. No: 09 99 000 0862
for 120 kN tool
Conductor cross-section: 10 mm²
Add to Wishlist
Removal Tool Han-Modular Flexbox
Removal tool
Removal Tool Han-Modular Flexbox
Article. No: 09 99 000 0979
Han-Modular® Flexbox
Add to Wishlist
Han Yellock Locator for 0110 tool
Locator
Han Yellock Locator for 0110 tool
Article. No: 09 99 000 0341
Han-Yellock®
Add to Wishlist
Crimp die 70mm² for 120 kN tool
Crimp die
Crimp die 70mm² for 120 kN tool
Article. No: 09 99 000 0867
for 120 kN tool
Conductor cross-section: 70 mm²
Add to Wishlist
case for crimping tool
Service case
case for crimping tool
Article. No: 09 99 000 0632
for crimping tool and 5 sets inserts, incl. screwdriver for insert change, without contents
Add to Wishlist
Removal tool pneumatic module metal 8/10
Removal tool
Removal tool pneumatic module metal 8/10
Article. No: 09 99 000 0999
for pneumatic contacts metal 8/10
Add to Wishlist
Crimp die 35mm² for 120 kN tool
Crimp die
Crimp die 35mm² for 120 kN tool
Article. No: 09 99 000 0865
for 120 kN tool
Conductor cross-section: 35 mm²
Add to Wishlist
SEK-18 REMOVAL-TOOL
Removal tool
SEK-18 REMOVAL-TOOL
Article. No: 09 99 000 0133
for male contacts of styles SEK and DIN Signal
Add to Wishlist
Han 3A Punching unit
Punching units
Han 3A Punching unit
Article. No: 09 99 000 0907
for hydraulic punch drivers
03 A
Add to Wishlist
SEK BENCH-PRESS
Bench press
SEK BENCH-PRESS
Article. No: 09 99 000 0114
for termination of insulation displacement connectors, Suitable for D-Sub and SEK
Add to Wishlist
Han 6B / Han-Eco 6B Punching unit
Punching units
Han 6B / Han-Eco 6B Punching unit
Article. No: 09 99 000 0902
for hydraulic punch drivers
06 B
Add to Wishlist
Removal Tool Han HV Single Module 2,5kV
Removal tool
Removal Tool Han HV Single Module 2,5kV
Article. No: 09 99 000 0335
for the Han® HV Single module
Add to Wishlist
DIN-Tool PLASTIC INSERT 3R
Insert blocks
DIN-Tool PLASTIC INSERT 3R
Article. No: 09 99 000 0264
for use with male connectors, Type 3R
Add to Wishlist
DSUB HAND CRIMP TOOL OUTER COAX CONT.
Hand crimping tool
DSUB HAND CRIMP TOOL OUTER COAX CONT.
Article. No: 09 99 000 0503
for coaxial contact, acc. to DIN 41626, for outer ferrule
Add to Wishlist
Crimp die 50mm² for 120 kN tool
Crimp die
Crimp die 50mm² for 120 kN tool
Article. No: 09 99 000 0866
for 120 kN tool
Conductor cross-section: 50 mm²
Add to Wishlist
PLASTIC INSERT
Insert blocks
PLASTIC INSERT
Article. No: 09 99 000 0276
for use with male connectors, Type 2R
Add to Wishlist
D-Sub DIE OUTER COAX CONTACT
Crimp die
D-Sub DIE OUTER COAX CONTACT
Article. No: 09 99 000 0508
for D-Sub
Add to Wishlist
Locator Han-Yellock 20A f. 0001
Locator
Locator Han-Yellock 20A f. 0001
Article. No: 09 99 000 0342
Han-Yellock®
Add to Wishlist
Screw Driver Set Slimline
Screw driver set Slimline
Screw Driver Set Slimline
Article. No: 09 99 000 0844
Insolated blade for slim assembly
Add to Wishlist
Crimp die 95mm² for 120 kN tool
Crimp die
Crimp die 95mm² for 120 kN tool
Article. No: 09 99 000 0868
for 120 kN tool
Conductor cross-section: 95 mm²
Add to Wishlist
hexagonal wrench adapter SW8
Hexagonal driver
hexagonal wrench adapter SW8
Article. No: 09 99 000 0372
Adapter 3/8in, for axial screw
Wrench size: 8
Add to Wishlist
DIN-Tool Crimpzange FC2
Hand crimping tool
DIN-Tool Crimpzange FC2
Article. No: 09 99 000 0119
for 250 bandoliered contacts, FC 2
Conductor cross-section: 0.14 ... 0.56 mm²
Add to Wishlist
3 4 5 more 17
Compare
0
Sort by
Filters
0

Topics & Trends

HARTING Newsletter