Close
Tools
Filters
  • Type of tool
    Select a value Reset filter
    • 8-indent crimping tool
      1
    • Adapter
      1
    • Adjustment gauge
      2
    • Assembly tool
      28
    • Base plate
      1
    • Battery crimping tool set
      1
    • Battery hydraulic punch driver
      1
    • Bench press
      2
    • Bit ¼in as a spare part for guiding pins and bushes
      1
    • Bottom tool
      14
    • Bottom tool carrier
      2
    • Cable cutter
      1
    • Cable test adapter
      1
    • Cabling tool for termination
      7
    • Centering plate female
      2
    • Check gauge
      2
    • Crimp die
      22
    • Crimping insert
      39
    • Crimping machine BK
      1
    • Crimping machine TC-C01
      3
    • Crimping machine TK-M
      1
    • Crimping tool
      3
    • Dynamometric screwdriver
      7
    • Foot switch
      1
    • Guide frame
      1
    • Han® VDE Screw Driver Set
      1
    • Hand crimping tool
      40
    • Hand hydraulic crimping tool
      2
    • Hexagonal driver
      6
    • Hexagonal head screwdriver
      1
    • Hexagonal scewdriver
      1
    • Hydraulic hand punch driver
      1
    • Insert
      15
    • Insert blocks
      7
    • Insert top tool
      2
    • Insertion / removal tools
      5
    • Interchangeable blades
      1
    • Interchangeable unit
      6
    • Locator
      38
    • One click cleaner
      2
    • PCB
      4
    • Pliers
      2
    • Pneumatic crimping tool
      2
    • Pneumatic press
      1
    • Polishing paper
      3
    • Polishing tool
      6
    • Polishing tool HP duplex
      1
    • Press-out tool
      4
    • Punching units
      21
    • Quick change tool
      7
    • Removal tool
      47
    • Replacement-tip
      4
    • Screw driver
      2
    • Screw driver set Slimline
      1
    • Service case
      1
    • Service crimping tool
      1
    • Slider
      2
    • Spacer block
      6
    • Spare blade cassette
      1
    • Spare part
      1
    • Spare part box
      1
    • Stripping blade set
      3
    • Stripping tool
      3
    • Support block
      1
    • Table fixing
      1
    • Tool insert
      3
    • Tool-kit
      2
    • Top tool
      67
    • Top tool carrier
      2
    • Torque set
      4
    • Torque tool
      1
    • Wire cutter
      1
    • Wire fixing rubber
      1
  • Description of the tool
    Select a value Reset filter
    • 10 poles
      3
    • 14 poles
      3
    • 16 poles
      2
    • 20 poles
      2
    • 26 poles
      3
    • 34 poles
      2
    • 4 indent crimp in acc. to MIL 22 520/2-01
      2
    • 40 A contact
      2
    • 40 poles
      2
    • 50 poles
      2
    • 64 poles
      3
    • Adapter 3/8in
      3
    • Angled
      2
    • BC / har-bus® 64
      3
    • Bit ¼in
      2
    • Bottom shield
      3
    • D-Sub
      3
    • DIN 41612
      8
    • FC 1
      3
    • FC 2
      4
    • FC 3
      4
    • HARTING PushPull (V4) Power
      2
    • Han D®
      9
    • Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224)
      3
    • Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227)
      2
    • Han E®
      10
    • Han E®: 0.14 ... 4 mm²
      3
    • Han E®: 0.5 ... 4 mm²
      2
    • Han-Modular®
      4
    • Han-Yellock®
      7
    • Han-Yellock®: 0.14 ... 4 mm²
      2
    • Han® C
      8
    • Han® C: 1.5 ... 4 mm²
      5
    • Han® C: 4 ... 10 mm²
      3
    • Han® F+B
      3
    • Han® P
      2
    • Insertion tool for single male press-in contacts
      2
    • Metal
      2
    • Modular insert
      10
    • Narrow
      2
    • Only for short posts and PCB thickness < 1.6 mm and without guide frame
      3
    • Punching pressure: 60 kN
      2
    • Relay contacts
      2
    • SC, F-SMA F-ST
      2
    • Spare part
      16
    • Suitable for D-Sub and SEK
      2
    • To produce panel cut outs for connectors
      2
    • With grip
      2
    • With upper shield
      8
    • har-bus® 64
      3
    • acc. to DIN 41626
      2
    • acc. to DIN 46228
      2
    • for 120 kN tool
      11
    • for 250 bandoliered contacts
      3
    • for 3U
      2
    • for 60 kN tool
      6
    • for D-Sub crimp contact
      2
    • for D-Sub mixed
      3
    • for HARTING ix Industrial® to assemble the single wire to the IDC and the cable strain relief crimping
      2
    • for Han-Fast® Lock single contact
      4
    • for Han-Yellock® modules and frames
      2
    • for M23 signal contacts
      2
    • for M8
      2
    • for SEK male low-profile connectors
      14
    • for SEK standard connectors
      10
    • for har-bus 64® female connectors
      4
    • for har-bus® HM Power
      2
    • for angled female connectors
      13
    • for angled male connectors
      2
    • for angled shielded female connectors
      12
    • for assembly of D-Sub hoods
      2
    • for axial screw
      7
    • for circular inserts
      2
    • for coaxial contact
      2
    • for contact replacement in male and female connectors
      2
    • for contacts BC / har-bus® 64
      2
    • for contacts FC 1, FC 2 and FC 3
      3
    • for crimping tool 09 99 000 0888
      3
    • for discrete wire termination
      8
    • for flange
      3
    • for hydraulic punch drivers
      21
    • for individual DIN 41612 contacts
      6
    • for individual contacts
      4
    • for ix Industrial® assembly tool
      3
    • for part number 09 99 000 0509
      4
    • for part number 09 99 000 0647
      35
    • for part number 09 99 000 0990
      5
    • for single D-Sub standard contacts
      3
    • for straight male connectors
      31
    • for type A
      8
    • for type AB
      21
    • for type B
      22
    • for type C
      6
    • for type D
      7
    • for type E
      7
    • for use with female connectors
      11
    • for use with male connectors
      9
    • for wire end ferrules
      4
    • incl. insert
      4
    • incl. locator
      4
  • Field of application
    Select a value Reset filter
    • Recommended for field use
      2
    • Recommended for production lines
      6
    • Recommended for stationary use in production lines
      18
    • for individual, turned male and female contacts
      9
    • for more than 25,000 crimping operations per year
      15
    • for stamped contacts on reel (250 ... 10.000)
      8
    • up to 1,000 crimping operations per year
      3
    • up to 10,000 crimping operations per year
      2
    • up to 25,000 crimping operations per year
      3
    • up to 3,000 crimping operations per year
      1
Show all filters
488 products (of 488)
3/17
New products - ascending
Crimp die 35mm² for 60 kN tool
Crimp die
Crimp die 35mm² for 60 kN tool
Article. No: 09 99 000 0855
for 60 kN tool
Conductor cross-section: 35 mm²
Add to Wishlist
Torque driver set for guide pins/bushing
Torque set
Torque driver set for guide pins/bushing
Article. No: 09 99 000 0840
for guiding pins and bushes, Tightening torque: 0.5 Nm, incl. 1/4in Bit
Add to Wishlist
Hand hydraulic crimping tool 60 kN
Hand hydraulic crimping tool
Hand hydraulic crimping tool 60 kN
Article. No: 09 99 000 0851
Pressing force 60 kN, Crimp die acc. to DIN 46235 with pressing width 9 mm
Conductor cross-section: 10 ... 70 mm²
Add to Wishlist
Locator f. crimping-tool 09990000888
Locator
Locator f. crimping-tool 09990000888
Article. No: 09 99 000 0887
Spare part, for crimping tool 09 99 000 0888
Add to Wishlist
M12-TORQUE KEY SW17 (0,6Nm)
Dynamometric screwdriver
M12-TORQUE KEY SW17 (0,6Nm)
Article. No: 09 99 000 0384
for M12-L
Wrench size: 17
Add to Wishlist
Hexagonal screwdriver SW5-for 200A+350A
Hexagonal driver
Hexagonal screwdriver SW5-for 200A+350A
Article. No: 09 99 000 0364
With grip, for axial screw
Wrench size: 5
Add to Wishlist
Removal Tool Han-Mod 200A Crimp
Removal tool
Removal Tool Han-Mod 200A Crimp
Article. No: 09 99 000 0820
for the Han® 200 A crimp module
Add to Wishlist
hexagonal wrench adapter SW4
Hexagonal driver
hexagonal wrench adapter SW4
Article. No: 09 99 000 0370
Adapter 3/8in, for axial screw
Wrench size: 4
Add to Wishlist
DSUB HAND CRIMP TOOL POWER CONTACT
Hand crimping tool
DSUB HAND CRIMP TOOL POWER CONTACT
Article. No: 09 99 000 0509
for power contacts
Conductor cross-section: 0.5 ... 6 mm²
Add to Wishlist
DIN-Tool Positionierer BC
Locator
DIN-Tool Positionierer BC
Article. No: 09 99 000 0630
BC / har-bus® 64, for part number 09 99 000 0620
Add to Wishlist
Screwdriver Set Han VDE
Han® VDE Screw Driver Set
Screwdriver Set Han VDE
Article. No: 09 99 000 0836
The standard set
Add to Wishlist
Removal tool for Han Quintax
Removal tool
Removal tool for Han Quintax
Article. No: 09 99 000 0323
Han-Quintax®, for Quintax contact
Add to Wishlist
Locator D-Sub für. 0501 (Gigabit Modul )
Locator
Locator D-Sub für. 0501 (Gigabit Modul )
Article. No: 09 99 000 0897
for single D-Sub standard contacts, 09 93 000 5576 + 09 93 000 5476
Add to Wishlist
har-flexicon screw driver, 2.0 x 40
Screw driver
har-flexicon screw driver, 2.0 x 40
Article. No: 14 99 000 0001
2.0 x 40
Add to Wishlist
Han-Fast Lock Unlocking Tool
Removal tool
Han-Fast Lock Unlocking Tool
Article. No: 09 99 000 0837
Han-Fast® Lock, for easier removal of the Fast-Lock contact from the printed circuit board
Add to Wishlist
hexagonal wrench adapter SW5
Hexagonal driver
hexagonal wrench adapter SW5
Article. No: 09 99 000 0371
Adapter 3/8in, for axial screw
Wrench size: 5
Add to Wishlist
DSUB HAND TOOLS
Hand crimping tool
DSUB HAND TOOLS
Article. No: 09 99 000 0169
for 500 bandoliered standard contacts
Conductor cross-section: 0.09 ... 0.56 mm²
Add to Wishlist
Han Yellock Locator for 0021 tool
Locator
Han Yellock Locator for 0021 tool
Article. No: 09 99 000 0343
Han-Yellock®
Add to Wishlist
POLISH TOOL FOR 2.2MM POF CABLE
Polishing tool
POLISH TOOL FOR 2.2MM POF CABLE
Article. No: 20 99 000 1093
POF cable 2.2 mm diameter
Add to Wishlist
Removal Tool Han-Mod f. double modules
Removal tool
Removal Tool Han-Mod f. double modules
Article. No: 09 99 000 0842
Han-Modular®, for double modules
Add to Wishlist
Removal Tool Han-Mod 100A Single Module
Removal tool
Removal Tool Han-Mod 100A Single Module
Article. No: 09 99 000 0827
for the Han® 100 A single module, for Han® GND
Add to Wishlist
Crimp die 50mm² for 60 kN tool
Crimp die
Crimp die 50mm² for 60 kN tool
Article. No: 09 99 000 0856
for 60 kN tool
Conductor cross-section: 50 mm²
Add to Wishlist
Removal Tool LC contacts
Removal tool
Removal Tool LC contacts
Article. No: 09 99 000 0843
for LC contact in the Han® LC module
Add to Wishlist
Removal Tool Han HC250-M/F
Removal tool
Removal Tool Han HC250-M/F
Article. No: 09 99 000 0332
for Han® HC Modular 250 Crimp, for unlocking the fixing plate
Add to Wishlist
Han Yellock Removal Tool Metal
Removal tool
Han Yellock Removal Tool Metal
Article. No: 11 99 000 0002
for Han-Yellock® modules and frames, Metal
Add to Wishlist
Battery Crimping Tool Set
Battery crimping tool set
Battery Crimping Tool Set
Article. No: 09 99 000 0990
Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²
Conductor cross-section: 0.14 ... 4 mm²
Add to Wishlist
CRIMPING TOOL
Hand crimping tool
CRIMPING TOOL
Article. No: 09 99 000 0120
for 250 bandoliered contacts, FC 3
Conductor cross-section: 0.5 ... 1.5 mm²
Add to Wishlist
Crimping tool for 1mm POF
Crimping tool
Crimping tool for 1mm POF
Article. No: 20 99 000 1035
for following 1 mm POF contacts, Han D®, Han E®, DIN 41626, Ferrule, F-SMA, -ST
Add to Wishlist
Torque Set HC SW 4/5
Torque set
Torque Set HC SW 4/5
Article. No: 09 99 000 0833
for High Current axial screw contact, incl. reversing blade (AF 4.0 + AF 5.0), Tightening torque: 5 ... 14 Nm
Add to Wishlist
DIN-Tool Crimptool Coax M
Hand crimping tool
DIN-Tool Crimptool Coax M
Article. No: 09 99 000 0194
Crimp die included, for coaxial contact, acc. to DIN 41626
Add to Wishlist
2 3 4 more 17
Compare
0
Sort by
Filters
0

Topics & Trends

HARTING Newsletter