Close
Tools
Filters
  • Type of tool
    Select a value Reset filter
    • 8-indent crimping tool
      1
    • Adapter
      1
    • Adjustment gauge
      2
    • Assembly tool
      28
    • Base plate
      1
    • Battery crimping tool set
      1
    • Battery hydraulic punch driver
      1
    • Bench press
      2
    • Bit ¼in as a spare part for guiding pins and bushes
      1
    • Bottom tool
      14
    • Bottom tool carrier
      2
    • Cable cutter
      1
    • Cable test adapter
      1
    • Cabling tool for termination
      7
    • Centering plate female
      2
    • Check gauge
      2
    • Crimp die
      22
    • Crimping insert
      39
    • Crimping machine BK
      1
    • Crimping machine TC-C01
      3
    • Crimping machine TK-M
      1
    • Crimping tool
      3
    • Dynamometric screwdriver
      7
    • Foot switch
      1
    • Guide frame
      1
    • Han® VDE Screw Driver Set
      1
    • Hand crimping tool
      40
    • Hand hydraulic crimping tool
      2
    • Hexagonal driver
      6
    • Hexagonal head screwdriver
      1
    • Hexagonal scewdriver
      1
    • Hydraulic hand punch driver
      1
    • Insert
      15
    • Insert blocks
      7
    • Insert top tool
      2
    • Insertion / removal tools
      5
    • Interchangeable blades
      1
    • Interchangeable unit
      6
    • Locator
      38
    • One click cleaner
      2
    • PCB
      4
    • Pliers
      2
    • Pneumatic crimping tool
      2
    • Pneumatic press
      1
    • Polishing paper
      3
    • Polishing tool
      6
    • Polishing tool HP duplex
      1
    • Press-out tool
      4
    • Punching units
      21
    • Quick change tool
      7
    • Removal tool
      47
    • Replacement-tip
      4
    • Screw driver
      2
    • Screw driver set Slimline
      1
    • Service case
      1
    • Service crimping tool
      1
    • Slider
      2
    • Spacer block
      6
    • Spare blade cassette
      1
    • Spare part
      1
    • Spare part box
      1
    • Stripping blade set
      3
    • Stripping tool
      3
    • Support block
      1
    • Table fixing
      1
    • Tool insert
      3
    • Tool-kit
      2
    • Top tool
      67
    • Top tool carrier
      2
    • Torque set
      4
    • Torque tool
      1
    • Wire cutter
      1
    • Wire fixing rubber
      1
  • Description of the tool
    Select a value Reset filter
    • 10 poles
      3
    • 14 poles
      3
    • 16 poles
      2
    • 20 poles
      2
    • 26 poles
      3
    • 34 poles
      2
    • 4 indent crimp in acc. to MIL 22 520/2-01
      2
    • 40 A contact
      2
    • 40 poles
      2
    • 50 poles
      2
    • 64 poles
      3
    • Adapter 3/8in
      3
    • Angled
      2
    • BC / har-bus® 64
      3
    • Bit ¼in
      2
    • Bottom shield
      3
    • D-Sub
      3
    • DIN 41612
      8
    • FC 1
      3
    • FC 2
      4
    • FC 3
      4
    • HARTING PushPull (V4) Power
      2
    • Han D®
      9
    • Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224)
      3
    • Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227)
      2
    • Han E®
      10
    • Han E®: 0.14 ... 4 mm²
      3
    • Han E®: 0.5 ... 4 mm²
      2
    • Han-Modular®
      4
    • Han-Yellock®
      7
    • Han-Yellock®: 0.14 ... 4 mm²
      2
    • Han® C
      8
    • Han® C: 1.5 ... 4 mm²
      5
    • Han® C: 4 ... 10 mm²
      3
    • Han® F+B
      3
    • Han® P
      2
    • Insertion tool for single male press-in contacts
      2
    • Metal
      2
    • Modular insert
      10
    • Narrow
      2
    • Only for short posts and PCB thickness < 1.6 mm and without guide frame
      3
    • Punching pressure: 60 kN
      2
    • Relay contacts
      2
    • SC, F-SMA F-ST
      2
    • Spare part
      16
    • Suitable for D-Sub and SEK
      2
    • To produce panel cut outs for connectors
      2
    • With grip
      2
    • With upper shield
      8
    • har-bus® 64
      3
    • acc. to DIN 41626
      2
    • acc. to DIN 46228
      2
    • for 120 kN tool
      11
    • for 250 bandoliered contacts
      3
    • for 3U
      2
    • for 60 kN tool
      6
    • for D-Sub crimp contact
      2
    • for D-Sub mixed
      3
    • for HARTING ix Industrial® to assemble the single wire to the IDC and the cable strain relief crimping
      2
    • for Han-Fast® Lock single contact
      4
    • for Han-Yellock® modules and frames
      2
    • for M23 signal contacts
      2
    • for M8
      2
    • for SEK male low-profile connectors
      14
    • for SEK standard connectors
      10
    • for har-bus 64® female connectors
      4
    • for har-bus® HM Power
      2
    • for angled female connectors
      13
    • for angled male connectors
      2
    • for angled shielded female connectors
      12
    • for assembly of D-Sub hoods
      2
    • for axial screw
      7
    • for circular inserts
      2
    • for coaxial contact
      2
    • for contact replacement in male and female connectors
      2
    • for contacts BC / har-bus® 64
      2
    • for contacts FC 1, FC 2 and FC 3
      3
    • for crimping tool 09 99 000 0888
      3
    • for discrete wire termination
      8
    • for flange
      3
    • for hydraulic punch drivers
      21
    • for individual DIN 41612 contacts
      6
    • for individual contacts
      4
    • for ix Industrial® assembly tool
      3
    • for part number 09 99 000 0509
      4
    • for part number 09 99 000 0647
      35
    • for part number 09 99 000 0990
      5
    • for single D-Sub standard contacts
      3
    • for straight male connectors
      31
    • for type A
      8
    • for type AB
      21
    • for type B
      22
    • for type C
      6
    • for type D
      7
    • for type E
      7
    • for use with female connectors
      11
    • for use with male connectors
      9
    • for wire end ferrules
      4
    • incl. insert
      4
    • incl. locator
      4
  • Field of application
    Select a value Reset filter
    • Recommended for field use
      2
    • Recommended for production lines
      6
    • Recommended for stationary use in production lines
      18
    • for individual, turned male and female contacts
      9
    • for more than 25,000 crimping operations per year
      15
    • for stamped contacts on reel (250 ... 10.000)
      8
    • up to 1,000 crimping operations per year
      3
    • up to 10,000 crimping operations per year
      2
    • up to 25,000 crimping operations per year
      3
    • up to 3,000 crimping operations per year
      1
Show all filters
488 products (of 488)
2/17
New products - ascending
Crimp set BC/FC1/har-bus 64
Crimping insert
Crimp set BC/FC1/har-bus 64
Article. No: 09 99 000 0621
for individual contacts, BC / FC 1 / har-bus® 64
Conductor cross-section: 0.09 ... 0.5 mm² for BC contacts 0.09 ... 0.25 mm² for FC 1 contacts
Add to Wishlist
hexagonal wrench adapter SW2
Hexagonal driver
hexagonal wrench adapter SW2
Article. No: 09 99 000 0369
Bit ¼in, 40 A contact, for axial screw
Wrench size: 2
Add to Wishlist
Removal Tool for contact in multi
Removal tool
Removal Tool for contact in multi
Article. No: 09 99 000 0328
for contacts in the multi module
Add to Wishlist
DIN-Tool Montage Crimp BC
Assembly tool
DIN-Tool Montage Crimp BC
Article. No: 09 99 000 0100
DIN 41612, for contacts BC / har-bus® 64
Add to Wishlist
DIN-Tool removal for contacts M
Removal tool
DIN-Tool removal for contacts M
Article. No: 09 99 000 0174
for type M, incl. removal jacket, for contact replacement in male and female connectors
Add to Wishlist
Single Bit guiding pins/bushes
Bit ¼in as a spare part for guiding pins and bushes
Single Bit guiding pins/bushes
Article. No: 09 99 000 0841
Add to Wishlist
D SUB MIXED EXTRACTION TOOL POWER COAX H
Removal tool
D SUB MIXED EXTRACTION TOOL POWER COAX H
Article. No: 09 99 000 0512
for coaxial, pneumatic, power and high voltage contacts, for D-Sub mixed
Add to Wishlist
crimp set FC 2
Crimping insert
crimp set FC 2
Article. No: 09 99 000 0622
for individual contacts, FC 2
Conductor cross-section: 0.14 ... 0.56 mm² for FC 2 contacts
Add to Wishlist
Removal tool Han® pneumatic module metal
Removal tool
Removal tool Han® pneumatic module metal
Article. No: 09 99 000 0899
for pneumatic contacts
Add to Wishlist
M12 dynamometric screwdriver SW15
Dynamometric screwdriver
M12 dynamometric screwdriver SW15
Article. No: 09 99 000 0646
for M12 Slim Design
Wrench size: 15
Add to Wishlist
Removal Tool Han-Mod f. single modules
Removal tool
Removal Tool Han-Mod f. single modules
Article. No: 09 99 000 0828
Han-Modular®, Han-Eco®, Han-Yellock®, for single modules, Metal
Add to Wishlist
Hexagonal Wrench Adapter SW2,5
Hexagonal driver
Hexagonal Wrench Adapter SW2,5
Article. No: 09 99 000 0375
Bit ¼in, 70 A contact, for axial screw
Wrench size: 2.5
Add to Wishlist
preLink unlocking tool 1=5
Removal tool
preLink unlocking tool 1=5
Article. No: 20 82 000 9916
for opening of theHARTING RJ Industrial® cable jacks
Add to Wishlist
Removal Tool Han-Mod 100A Crimp
Removal tool
Removal Tool Han-Mod 100A Crimp
Article. No: 09 99 000 0383
for the Han® 100 A crimp module
Add to Wishlist
PLASTIC INSERT
Insert blocks
PLASTIC INSERT
Article. No: 09 99 000 0275
for use with male connectors, Type Q
Add to Wishlist
Torque Set Power Contacts SW2,5/2/PH2
Torque set
Torque Set Power Contacts SW2,5/2/PH2
Article. No: 09 99 000 0834
for power contact, incl. reversing blade (AF 2.0 + AF 2.5 + PH2), + different bits, + adapter blade, Tightening torque: 1 ... 5 Nm
Add to Wishlist
Go / no-go gauge for 09990000888
Check gauge
Go / no-go gauge for 09990000888
Article. No: 09 99 000 0889
for crimping tool 09 99 000 0888, for optional testing
Add to Wishlist
DIN-Tool Ersatzhülse M
Replacement-tip
DIN-Tool Ersatzhülse M
Article. No: 09 99 000 0243
DIN 41612, for removal tool 09 99 000 0174
Add to Wishlist
DIN-Tool Positionierer FC
Locator
DIN-Tool Positionierer FC
Article. No: 09 99 000 0631
FC, for part number 09 99 000 0620
Add to Wishlist
insertion/removal tool Han 1A/D-Sub
Insertion / removal tools
insertion/removal tool Han 1A/D-Sub
Article. No: 09 99 000 0809
for D-Sub crimp contact, Han® 1A
Add to Wishlist
D SUB HD SERVICE CRIMP TOOL
Hand crimping tool
D SUB HD SERVICE CRIMP TOOL
Article. No: 09 99 000 0596
Add to Wishlist
Crimptool Opening
Hand crimping tool
Crimptool Opening
Article. No: 09 99 000 0647
for crimp barrel and crimp flange
Add to Wishlist
Crimp die 16mm² for 60 kN tool
Crimp die
Crimp die 16mm² for 60 kN tool
Article. No: 09 99 000 0853
for 60 kN tool
Conductor cross-section: 16 mm²
Add to Wishlist
Crimp die 10mm² for 60 kN tool
Crimp die
Crimp die 10mm² for 60 kN tool
Article. No: 09 99 000 0852
for 60 kN tool
Conductor cross-section: 10 mm²
Add to Wishlist
Han Yellock Removal Tool Plastic
Removal tool
Han Yellock Removal Tool Plastic
Article. No: 11 99 000 0001
for Han-Yellock® modules and frames, Thermoplastic
Add to Wishlist
Locator Set Han D/E/C, for Crimping tool
Locator
Locator Set Han D/E/C, for Crimping tool
Article. No: 09 99 000 0376
Spare part, Han D®, Han E®, Han® C
Add to Wishlist
HPP V4 Power contact removal tool
Removal tool
HPP V4 Power contact removal tool
Article. No: 09 46 800 0098
HARTING PushPull (V4) Power, for an easy extraction of the male and female crimp contacts out of the insulation body
Add to Wishlist
Crimp die 25mm² for 60 kN tool
Crimp die
Crimp die 25mm² for 60 kN tool
Article. No: 09 99 000 0854
for 60 kN tool
Conductor cross-section: 25 mm²
Add to Wishlist
POLISH PAPER FOR POF GRAIN SIZE 1
Polishing paper
POLISH PAPER FOR POF GRAIN SIZE 1
Article. No: 20 80 001 9911
for POF grain size 1000
Add to Wishlist
Ball end hexagonal screwdriver SW2.5x100
Hexagonal head screwdriver
Ball end hexagonal screwdriver SW2.5x100
Article. No: 61 03 600 0021
for InduCom hoods with hexagonal screws, With ball end
Add to Wishlist
1 2 3 more 17
Compare
0
Sort by
Filters
0

Topics & Trends

HARTING Newsletter