Close
Crimping
Filters
  • Type of tool
    Select a value Reset filter
    • 8-indent crimping tool
      1
    • Adjustment gauge
      2
    • Assembly tool
      5
    • Battery crimping tool set
      1
    • Check gauge
      2
    • Crimp die
      22
    • Crimping insert
      39
    • Crimping machine BK
      1
    • Crimping machine TC-C01
      3
    • Crimping machine TK-M
      1
    • Crimping tool
      3
    • Foot switch
      1
    • Hand crimping tool
      40
    • Hand hydraulic crimping tool
      2
    • Interchangeable unit
      6
    • Locator
      38
    • Pneumatic crimping tool
      2
    • Quick change tool
      7
    • Replacement-tip
      1
    • Service case
      1
    • Service crimping tool
      1
    • Support block
      1
    • Table fixing
      1
    • Tool insert
      1
  • Description of the tool
    Select a value Reset filter
    • 09 93 000 5576 + 09 93 000 5476
      1
    • 21 01 100 9020
      1
    • 21 01 100 9025
      1
    • 4 indent crimp in acc. to MIL 22 520/2-01
      2
    • Angled
      2
    • BC
      1
    • BC / FC / har-bus® 64
      1
    • BC / FC 1 / har-bus® 64
      1
    • BC / har-bus® 64
      3
    • Basic machine without interchangeable unit
      1
    • Crimp die acc. to DIN 46235 with pressing width 10 ... 14 mm
      1
    • Crimp die acc. to DIN 46235 with pressing width 9 mm
      1
    • Crimp die included
      1
    • D-Sub
      3
    • DIN 41612
      1
    • FC
      1
    • FC 1
      3
    • FC 2
      4
    • FC 3
      4
    • HARTING UIC 558: 0.75 ... 1 mm²
      1
    • Han D®
      6
    • Han D®, Han E®, DIN 41626, Ferrule, F-SMA, -ST
      1
    • Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224)
      3
    • Han D®: 0.14 ... 2.5 mm²
      1
    • Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227)
      2
    • Han E®
      8
    • Han E®: 0.14 ... 4 mm²
      3
    • Han E®: 0.5 ... 2.5 mm²
      1
    • Han E®: 0.5 ... 4 mm²
      2
    • Han-Yellock®
      5
    • Han-Yellock®: 0.14 ... 4 mm²
      2
    • Han-Yellock®: 0.5 ... 2.5 mm²
      1
    • Han-Yellock®: 0.5 ... 4 mm²
      1
    • Han® C
      6
    • Han® C: 1.5 ... 4 mm²
      5
    • Han® C: 4 ... 10 mm²
      3
    • Han® HsB: 1.5 ... 4 mm²
      1
    • Han® HsB: 4 ... 10 mm²
      1
    • Han® P
      2
    • Pressing force 120 kN
      1
    • Pressing force 60 kN
      1
    • Relay contacts
      2
    • SC, F-SMA F-ST
      2
    • Spare part
      8
    • Top part
      1
    • acc. to DIN 41626
      2
    • acc. to DIN 46228
      2
    • for 0.6 mm data contacts
      1
    • for 120 kN tool
      11
    • for 250 bandoliered contacts
      3
    • for 500 bandoliered D-Sub high density contacts
      1
    • for 500 bandoliered contacts
      1
    • for 500 bandoliered standard contacts
      1
    • for 60 kN tool
      6
    • for BC contacts
      1
    • for D-Sub
      1
    • for D-Sub mixed
      1
    • for FO connector (glass fibre)
      1
    • for FO connector (plastic fibre)
      1
    • for HARTING PushPull Power contacts for crimping tool 09 99 000 0001
      1
    • for HARTING RJ Industrial® Gigalink Cat. 6A connectors
      1
    • for HARTING RJ Industrial® Gigalink connectors
      1
    • for HARTING RJ Industrial® PN Compact connector set
      1
    • for HARTING T1 Industrial contacts (AWG 24 ... AWG 22)
      1
    • for HARTING T1 Industrial contacts (AWG 28 ... AWG 26)
      1
    • for HARTING ix Industrial® to assamble the cable strain relief crimping
      1
    • for Han D® contact
      1
    • for Han E® contact
      1
    • for Han-Fast® Lock single contact
      4
    • for Han® C contact
      1
    • for M12 female contacts
      1
    • for M12 male contacts
      1
    • for M17 contacts
      1
    • for M23 power contacts
      1
    • for M23 signal contacts
      2
    • for har-bus® HM coding keys
      1
    • for har-speed M12 female contacts
      1
    • for har-speed M12 male contacts
      1
    • for assembly of D-Sub hoods
      1
    • for coaxial contact
      2
    • for contact replacement in male and female connectors
      1
    • for contacts FC 1, FC 2 and FC 3
      1
    • for crimp barrel and crimp flange
      1
    • for crimping tool 09 99 000 0695 and 09 99 000 0890
      1
    • for crimping tool 09 99 000 0888
      3
    • for four-indent crimping tools
      2
    • for individual DIN 41612 contacts
      6
    • for individual contacts
      4
    • for outer ferrule
      2
    • for part number 09 99 000 0307 and 09 99 000 0314
      2
    • for part number 09 99 000 0377
      2
    • for part number 09 99 000 0503
      2
    • for part number 09 99 000 0509
      4
    • for part number 09 99 000 0620
      2
    • for part number 09 99 000 0647
      35
    • for part number 09 99 000 0990
      5
    • for single D-Sub standard contacts
      2
    • for turned male and female contacts
      2
    • for wire end ferrules
      4
    • incl. locator
      4
  • Field of application
    Select a value Reset filter
    • Recommended for field use
      2
    • Recommended for production lines
      6
    • Recommended for stationary use in production lines
      18
    • for individual, turned male and female contacts
      9
    • for more than 25,000 crimping operations per year
      15
    • for stamped contacts on reel (250 ... 10.000)
      8
    • up to 1,000 crimping operations per year
      3
    • up to 10,000 crimping operations per year
      2
    • up to 25,000 crimping operations per year
      3
    • up to 3,000 crimping operations per year
      1
Show all filters
183 products (of 183)
5/7
New products - ascending
quick change tool BK for BC
Quick change tool
quick change tool BK for BC
Article. No: 09 98 000 3004
for BC contacts
Conductor cross-section: 0.09 ... 0.56 mm²
Add to Wishlist
Four-Indent Crimping Tool
Crimping tool
Four-Indent Crimping Tool
Article. No: 09 99 000 0001
Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227), Han E®: 0.14 ... 4 mm², Han-Yellock®: 0.14 ... 4 mm², Han® C: 1.5 ... 4 mm²
Conductor cross-section: 0.14 ... 4 mm²
Add to Wishlist
quick change tool BK for HD D-Sub
Quick change tool
quick change tool BK for HD D-Sub
Article. No: 09 98 000 3012
for single D-Sub high density contacts
Conductor cross-section: 0.14 ... 0.22 mm²
Add to Wishlist
D-Sub HD Positioner for MA Crimp contact
Locator
D-Sub HD Positioner for MA Crimp contact
Article. No: 09 99 000 0525
for har-speed M12 male contacts
Add to Wishlist
crimping machine TC-C01 for Han E
Crimping machine TC-C01
crimping machine TC-C01 for Han E
Article. No: 09 98 000 9002
for Han E® contact
Conductor cross-section: 0.14 ... 4 mm²
Add to Wishlist
DSUB TOP-TOOL FOR HOODS
Assembly tool
DSUB TOP-TOOL FOR HOODS
Article. No: 09 99 000 0215
for assembly of D-Sub hoods, Top part
Add to Wishlist
quick change tool BK for FC1
Quick change tool
quick change tool BK for FC1
Article. No: 09 98 000 3005
FC 1
Conductor cross-section: 0.09 ... 0.25 mm²
Add to Wishlist
Locator Han C f. 0001
Locator
Locator Han C f. 0001
Article. No: 09 99 000 0308
Han® C
Conductor cross-section: 1.5 ... 4 mm²
Add to Wishlist
Locator for D-SUB mixed HV crimp contact
Locator
Locator for D-SUB mixed HV crimp contact
Article. No: 09 99 000 0533
for part number 09 99 000 0501
Add to Wishlist
DSUB DIE INNER COAX CONTACT
Locator
DSUB DIE INNER COAX CONTACT
Article. No: 09 99 000 0507
for inner contact die
Add to Wishlist
D SUB MIXED die for outer conductor of
Crimp die
D SUB MIXED die for outer conductor of
Article. No: 09 99 000 0519
for part number 09 99 000 0503
Add to Wishlist
D SUB MIXED die for short male power cri
Locator
D SUB MIXED die for short male power cri
Article. No: 09 99 000 0522
for male contacts, for part number 09 99 000 0509
Add to Wishlist
D SUB MIXED die for short female power c
Locator
D SUB MIXED die for short female power c
Article. No: 09 99 000 0521
for female contacts, for part number 09 99 000 0509
Add to Wishlist
Interchangeable unit TK-M for Han P
Interchangeable unit
Interchangeable unit TK-M for Han P
Article. No: 09 98 000 6906
Han® P
Conductor cross-section: 0.5 ... 2.5 mm²
Add to Wishlist
Interchangeable unit TK-M for HanYellock
Interchangeable unit
Interchangeable unit TK-M for HanYellock
Article. No: 09 98 000 6907
Han-Yellock®
Conductor cross-section: 0.14 ... 2.5 mm²
Add to Wishlist
Bench Mount f. 0314/0307
Table fixing
Bench Mount f. 0314/0307
Article. No: 09 99 000 0309
for part number 09 99 000 0307 and 09 99 000 0314
Add to Wishlist
Foot switch / Bench mount-Set
Foot switch
Foot switch / Bench mount-Set
Article. No: 09 99 000 0347
for part number 09 99 000 0307 and 09 99 000 0314
Add to Wishlist
Ferrule crimping tool 4-16mm²
Hand crimping tool
Ferrule crimping tool 4-16mm²
Article. No: 09 99 000 0971
for wire end ferrules, acc. to DIN 46228
Conductor cross-section: 4 ... 16 mm²
Add to Wishlist
Pneumatic Crimping Tool Set Han C/D/E
Pneumatic crimping tool
Pneumatic Crimping Tool Set Han C/D/E
Article. No: 09 99 000 0314
Han D®: 0.14 ... 2.5 mm², Han E®: 0.14 ... 4 mm², Han® C: 1.5 ... 4 mm²
Add to Wishlist
Ferrule crimping tool 0,14-2,5mm²
Hand crimping tool
Ferrule crimping tool 0,14-2,5mm²
Article. No: 09 99 000 0970
for wire end ferrules, acc. to DIN 46228
Conductor cross-section: 0.14 ... 2.5 mm²
Add to Wishlist
M23 locator, Ethernet contact 0.6mm
Locator
M23 locator, Ethernet contact 0.6mm
Article. No: 09 99 000 0961
for 0.6 mm data contacts, for crimping tool 09 99 000 0890
Add to Wishlist
Service Crimp Tool FC1-3
Hand crimping tool
Service Crimp Tool FC1-3
Article. No: 09 99 000 0656
for individual DIN 41612 contacts, for contacts FC 1, FC 2 and FC 3
Conductor cross-section: 0.25 mm² for FC 1 contacts 0.25 ... 0.56 mm² for FC 2 contacts 0.75 ... 1.5 mm² for FC 3 contacts
Add to Wishlist
Adjustment Gauge Set 1.8/2.0/2.4/2.8
Adjustment gauge
Adjustment Gauge Set 1.8/2.0/2.4/2.8
Article. No: 09 99 000 0975
for four-indent crimping tools
Add to Wishlist
Crimp inserts 8,5 for tool 09990000647
Crimping insert
Crimp inserts 8,5 for tool 09990000647
Article. No: 09 99 000 0658
for part number 09 99 000 0647
Wrench size: 8.5
Add to Wishlist
Crimp inserts 9,5 for tool 09990000647
Crimping insert
Crimp inserts 9,5 for tool 09990000647
Article. No: 09 99 000 0654
for part number 09 99 000 0647
Wrench size: 9.5
Add to Wishlist
Crimp inserts 7,0 for tool 09990000647
Crimping insert
Crimp inserts 7,0 for tool 09990000647
Article. No: 09 99 000 0648
for part number 09 99 000 0647
Wrench size: 7
Add to Wishlist
Go / No-Go gage for 09990000501
Check gauge
Go / No-Go gage for 09990000501
Article. No: 09 99 000 0617
Add to Wishlist
Locator M12
Locator
Locator M12
Article. No: 09 99 000 0618
for part number 09 99 000 0501 and Data- und Power contacts Y-coding
Add to Wishlist
Crimping Set FC1
Hand crimping tool
Crimping Set FC1
Article. No: 09 99 000 0771
for individual DIN 41612 contacts, FC 1
Conductor cross-section: 0.09 ... 0.25 mm²
Add to Wishlist
Pneum. crimping tool x501
Pneumatic crimping tool
Pneum. crimping tool x501
Article. No: 09 99 000 0664
for turned male and female contacts, 4 indent crimp in acc. to MIL 22 520/2-01
Conductor cross-section: 0.09 ... 0.82 mm²
Add to Wishlist
1 more 5 6 7
Compare
0
Sort by
Filters
0

Topics & Trends

HARTING Newsletter