Close
Assembly tools
  • Easy handling
  • Robust design
Filters
  • Type of tool
    Select a value Reset filter
    • Assembly tool
      23
    • Battery hydraulic punch driver
      1
    • Bench press
      1
    • Bit ¼" as a spare part for guiding pins and bushes
      1
    • Cable cutter for flat cables
      1
    • Cabling tool for termination of flat cable
      7
    • Dynamometric screwdriver
      7
    • Han® VDE Screw Driver Set
      1
    • Hexagonal driver for axial screw
      7
    • Hexagonal head screwdriver
      1
    • Hexagonal scewdriver
      1
    • Hydraulic hand punch driver
      1
    • Insertion / removal tools
      2
    • Insertion tool for crimp contacts
      2
    • Interchangeable blades
      1
    • One click cleaner
      2
    • Pliers
      1
    • Polishing paper
      3
    • Polishing tool
      6
    • Polishing tool HP duplex
      1
    • Punching units for hydraulic punch drivers
      21
    • Replacement-tip
      1
    • Screw driver set Slimline
      1
    • Tool insert
      2
    • Tool-kit
      2
    • Torque set
      4
    • Torque tool
      1
  • Description of the tool
    Select a value Reset filter
    • + adapter blade
      1
    • + different bits
      1
    • 1.25 mm
      1
    • 2.5 mm
      1
    • 40 A contact
      2
    • 70 A contact
      1
    • Adapter 3/8"
      3
    • Bit ¼"
      2
    • Bottom part
      1
    • Cable gland
      1
    • DIN 41612
      6
    • F-ST
      1
    • Ferrule
      1
    • For SP1 and SP2
      1
    • HARTING PushPull (V4) Power
      1
    • Han D®
      1
    • Han E®
      1
    • Han-Modular®
      1
    • Han-Yellock®
      1
    • Han® 3 A
      1
    • Han® 4 A
      1
    • Han® F+B
      1
    • Han® Q 5/0
      1
    • Insertion tool for coding pin
      1
    • Insertion tool for single male press-in contacts
      2
    • Insolated blade for slim assembly
      1
    • Only measuring device
      1
    • POF cable 2.2 mm diameter
      1
    • Punching pressure: 60 kN
      2
    • SC
      1
    • SC POF
      1
    • Small cross-section
      1
    • Staf®
      1
    • Suitable for D-Sub
      1
    • Suitable for D-Sub and SEK
      2
    • Suitable for SEK DIP
      1
    • Suitable for SEK LP, 2 rows
      1
    • Suitable for SEK LP, 4 rows
      1
    • Suitable for SEK female
      1
    • Suitable for har-flex® female
      1
    • The standard set
      1
    • Tightening torque: 0.5 ... 1.2 Nm
      1
    • Tightening torque: 0.5 Nm
      1
    • Tightening torque: 1 ... 5 Nm
      1
    • Tightening torque: 5 ... 14 Nm
      1
    • To produce panel cut outs for connectors
      2
    • To tighten the har-port fixing nut
      1
    • Top part
      1
    • Variable length of blade
      1
    • With grip
      3
    • With measuring device
      1
    • har-bus® HM
      1
    • for 7/8"
      1
    • for D-Sub hoods (50 contacts)
      1
    • for D-Sub hoods (9-37 contacts)
      1
    • for GI 1 μ-grain size
      1
    • for GI 9 μ-grain size
      1
    • for HARTING RJ Industrial® Gigalink Cat. 6A connectors
      1
    • for HARTING RJ Industrial® Gigalink connectors
      1
    • for HARTING RJ Industrial® PN Compact connector set
      1
    • for HARTING ix Industrial® and HARTING Mini PushPull ix Industrial® to assemble the single wire to the IDC and the cable strain relief crimping
      1
    • for HARTING ix Industrial® to assemble the single wire to the IDC and the cable strain relief crimping
      2
    • for HARTING screw contacts and fixing screws
      1
    • for Han® ES insert
      1
    • for High Current axial screw contact
      1
    • for InduCom hoods with hexagonal screws
      1
    • for M12 Power
      1
    • for M12 Slim Design
      1
    • for M12-L
      1
    • for M12-S
      1
    • for M8
      2
    • for POF grain size 1000
      1
    • for har-bus® HM coding keys
      1
    • for an easy insertion of male and female contacts into the insulation body
      1
    • for angled variant
      1
    • for assembly of D-Sub hoods
      2
    • for axial screw
      1
    • for breaking out the coding area
      1
    • for contacts BC / har-bus® 64
      1
    • for contacts FC 1, FC 2 and FC 3
      1
    • for flange
      3
    • for guiding pins and bushes
      1
    • for ix Industrial® assembly tool
      2
    • for part number 09 99 000 0615
      1
    • for part number 09 99 000 0847
      1
    • for power contact
      1
    • for preLink® termination block
      1
    • for single D-Sub high density contacts
      1
    • for single D-Sub standard contacts
      1
    • for single modules
      1
    • for straight variant
      1
    • for termination of insulation displacement connectors
      1
    • incl. 1/4" Bit
      1
    • incl. reversing blade (AF 2.0 + AF 2.5 + PH2)
      1
    • incl. reversing blade (AF 4.0 + AF 5.0)
      1
Show all filters
102 products (of 102)
1/4
New products - ascending
DSUB INSERTION-REMOVAL-TOOL
Insertion / removal tools
DSUB INSERTION-REMOVAL-TOOL
Article. No: 09 99 000 0171
for single D-Sub standard contacts
Add to Wishlist
Insertion Tool, Han
Insertion tool for crimp contacts
Insertion Tool, Han
Article. No: 09 99 000 0059
Add to Wishlist
D SUB HD INSERTION EXTRACTION TOOL
Insertion / removal tools
D SUB HD INSERTION EXTRACTION TOOL
Article. No: 09 99 000 0513
for single D-Sub high density contacts
Add to Wishlist
Mounting tool Han D/E/Yellock
Insertion tool for crimp contacts
Mounting tool Han D/E/Yellock
Article. No: 09 99 000 0847
Small cross-section, Variable length of blade, Han D®, Han E®, Han-Yellock®
Add to Wishlist
DIN-TOOL MONTAGE CRIMP FC
Assembly tool
DIN-TOOL MONTAGE CRIMP FC
Article. No: 09 99 000 0088
DIN 41612, for contacts FC 1, FC 2 and FC 3
Add to Wishlist
Hexagonal Screw Driver SW 2
Hexagonal scewdriver
Hexagonal Screw Driver SW 2
Article. No: 09 99 000 0313
for axial screw, With grip, 40 A contact (A/F 2)
Add to Wishlist
preLink Assembly tool
Assembly tool
preLink Assembly tool
Article. No: 20 82 000 9901
for preLink® termination block
Add to Wishlist
Removal Tool f. Han ES
Assembly tool
Removal Tool f. Han ES
Article. No: 09 99 000 0367
for Han® ES insert
Add to Wishlist
hexagonal wrench adapter SW2
Hexagonal driver for axial screw
hexagonal wrench adapter SW2
Article. No: 09 99 000 0369
Bit ¼", 40 A contact (A/F 2)
Add to Wishlist
DIN-Tool Montage Crimp BC
Assembly tool
DIN-Tool Montage Crimp BC
Article. No: 09 99 000 0100
DIN 41612, for contacts BC / har-bus® 64
Add to Wishlist
Single Bit guiding pins/bushes
Bit ¼" as a spare part for guiding pins and bushes
Single Bit guiding pins/bushes
Article. No: 09 99 000 0841
Add to Wishlist
M12 dynamometric screwdriver SW15
Dynamometric screwdriver
M12 dynamometric screwdriver SW15
Article. No: 09 99 000 0646
for M12 Slim Design
Wrench size: 15
Add to Wishlist
Hexagonal screwdriver SW4 - for 100A mod
Hexagonal driver for axial screw
Hexagonal screwdriver SW4 - for 100A mod
Article. No: 09 99 000 0363
With grip, A/F 4 (e. g. Han® 100 A Axial module)
Add to Wishlist
Hexagonal Wrench Adapter SW2,5
Hexagonal driver for axial screw
Hexagonal Wrench Adapter SW2,5
Article. No: 09 99 000 0375
Bit ¼", 70 A contact (A/F 2.5)
Add to Wishlist
Torque Set Power Contacts SW2,5/2/PH2
Torque set
Torque Set Power Contacts SW2,5/2/PH2
Article. No: 09 99 000 0834
for power contact, incl. reversing blade (A/F 2.0 + A/F 2.5 + PH2), + different bits, + adapter blade, Tightening torque: 1 ... 5 Nm
Add to Wishlist
POLISH PAPER FOR POF GRAIN SIZE 1
Polishing paper
POLISH PAPER FOR POF GRAIN SIZE 1
Article. No: 20 80 001 9911
for POF grain size 1000
Add to Wishlist
Ball end hexagonal screwdriver SW2.5x100
Hexagonal head screwdriver
Ball end hexagonal screwdriver SW2.5x100
Article. No: 61 03 600 0021
for InduCom hoods with hexagonal screws
Add to Wishlist
Torque driver set for guide pins/bushing
Torque set
Torque driver set for guide pins/bushing
Article. No: 09 99 000 0840
for guiding pins and bushes, Tightening torque: 0.5 Nm, incl. 1/4" Bit
Add to Wishlist
M12-TORQUE KEY SW17 (0,6Nm)
Dynamometric screwdriver
M12-TORQUE KEY SW17 (0,6Nm)
Article. No: 09 99 000 0384
for M12-L
Wrench size: 17
Add to Wishlist
Hexagonal screwdriver SW5-for 200A+350A
Hexagonal driver for axial screw
Hexagonal screwdriver SW5-for 200A+350A
Article. No: 09 99 000 0364
With grip, A/F 5 (e. g. Han® 200 A Axial module)
Add to Wishlist
hexagonal wrench adapter SW4
Hexagonal driver for axial screw
hexagonal wrench adapter SW4
Article. No: 09 99 000 0370
Adapter 3/8", A/F 4 (e. g. Han® 100 A Axial module)
Add to Wishlist
Screwdriver Set Han VDE
Han® VDE Screw Driver Set
Screwdriver Set Han VDE
Article. No: 09 99 000 0836
The standard set
Add to Wishlist
hexagonal wrench adapter SW5
Hexagonal driver for axial screw
hexagonal wrench adapter SW5
Article. No: 09 99 000 0371
Adapter 3/8", A/F 5 (e. g. Han® 200 A Axial module)
Add to Wishlist
POLISH TOOL FOR 2.2MM POF CABLE
Polishing tool
POLISH TOOL FOR 2.2MM POF CABLE
Article. No: 20 99 000 1093
POF cable 2.2 mm diameter
Add to Wishlist
Torque Set HC SW 4/5
Torque set
Torque Set HC SW 4/5
Article. No: 09 99 000 0833
for High Current axial screw contact, incl. reversing blade (A/F 4.0 + A/F 5.0), Tightening torque: 5 ... 14 Nm
Add to Wishlist
M12-Torque key SW13 (0,6Nm)
Dynamometric screwdriver
M12-Torque key SW13 (0,6Nm)
Article. No: 09 99 000 0382
for M12-S
Wrench size: 13
Add to Wishlist
Han 3A Punching unit
Punching units for hydraulic punch drivers
Han 3A Punching unit
Article. No: 09 99 000 0907
03 A
Add to Wishlist
SEK BENCH-PRESS
Bench press
SEK BENCH-PRESS
Article. No: 09 99 000 0114
for termination of insulation displacement connectors, Suitable for D-Sub and SEK
Add to Wishlist
Han 6B / Han-Eco 6B Punching unit
Punching units for hydraulic punch drivers
Han 6B / Han-Eco 6B Punching unit
Article. No: 09 99 000 0902
06 B
Add to Wishlist
Screw Driver Set Slimline
Screw driver set Slimline
Screw Driver Set Slimline
Article. No: 09 99 000 0844
Insolated blade for slim assembly
Add to Wishlist
1 2 3 4
Compare
0
Sort by
Filters
0

Topics & Trends

HARTING Newsletter