Crimping tools
  • Can be processed manually
  • Gas-tight crimp connections
  • Ergonomic design
Filters
  • Category
    Select a value Reset filter
    • Tools
      68
  • Conductor cross-section
    Select a value Reset filter
    • 0.09 ... 0.56 mm²
      2
    • 0.09 ... 0.82 mm²
      2
    • 0.14 ... 1.5 mm²
      1
    • 0.14 ... 2.5 mm²
      1
    • 0.14 ... 4 mm²
      3
    • 0.5 ... 2.5 mm²
      1
    • 0.5 ... 4 mm²
      1
    • 0.5 ... 6 mm²
      1
    • 0.75 ... 1 mm²
      1
    • 1.5 ... 2.5 mm²
      2
    • 1.5 ... 4 mm²
      2
    • 10 mm²
      3
    • 10 ... 240 mm²
      2
    • 10 ... 70 mm²
      2
    • 120 mm²
      1
    • 150 mm²
      1
    • 16 mm²
      2
    • 16 ... 25 mm²
      1
    • 185 mm²
      1
    • 240 mm²
      1
    • 25 mm²
      2
    • 35 mm²
      2
    • 4 ... 10 mm²
      3
    • 50 mm²
      2
    • 70 mm²
      2
    • 95 mm²
      1
  • Series
    Select a value Reset filter
    • HARTING UIC
      1
    • Han P®
      1
  • Type of tool
    Select a value Reset filter
    • Battery crimping tool set
      1
    • Battery hydraulic tool
      2
    • Check gauge
      1
    • Crimp die
      19
    • Crimping tool
      2
    • Hand crimping tool
      22
    • Hand hydraulic crimping tool
      2
    • Locator
      17
    • Pneumatic crimping tool
      1
    • Service crimping tool
      1
  • Description of the tool
    Select a value Reset filter
    • 09 93 000 5576 + 09 93 000 5476
      1
    • 4 indent crimp in acc. to MIL 22 520/2-01
      2
    • Angled
      2
    • Crimp die acc. to DIN 46235 with pressing width 10 ... 14 mm
      2
    • Crimp die acc. to DIN 46235 with pressing width 9 mm
      2
    • Crimp die included
      1
    • HARTING UIC 558: 0.75 ... 1 mm²
      1
    • Han D®
      3
    • Han D®, Han E®, DIN 41626, Ferrule, F-SMA, -ST
      1
    • Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224)
      3
    • Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227)
      1
    • Han E®
      4
    • Han E®: 0.14 ... 4 mm²
      1
    • Han E®: 0.5 ... 2.5 mm²
      1
    • Han E®: 0.5 ... 4 mm²
      2
    • Han-Yellock®
      3
    • Han-Yellock®: 0.14 ... 4 mm²
      1
    • Han-Yellock®: 0.5 ... 2.5 mm²
      1
    • Han-Yellock®: 0.5 ... 4 mm²
      1
    • Han® C
      2
    • Han® C: 1.5 ... 4 mm²
      3
    • Han® C: 4 ... 10 mm²
      3
    • Han® HsB: 1.5 ... 4 mm²
      1
    • Han® HsB: 4 ... 10 mm²
      1
    • Han® P
      1
    • Pressing force 120 kN
      2
    • Pressing force 60 kN
      2
    • Relay contacts
      1
    • SC, F-SMA F-ST
      2
    • Spare part
      7
    • acc. to DIN 41626
      2
    • for 120 kN tool
      11
    • for 500 bandoliered D-Sub high density contacts
      1
    • for 500 bandoliered standard contacts
      1
    • for 60 kN tool
      6
    • for D-Sub
      1
    • for FO connector (glass fibre)
      1
    • for FO connector (plastic fibre)
      1
    • for Han-Fast® Lock single contact
      4
    • for coaxial contact
      2
    • for crimp barrel and crimp flange
      1
    • for crimping tool 09 99 000 0888
      3
    • for following 1 mm POF contacts
      1
    • for optional testing
      1
    • for outer ferrule
      1
    • for part number 09 99 000 0377
      2
    • for part number 09 99 000 0509
      1
    • for part number 09 99 000 0990
      4
    • for power contacts
      1
    • for signal contacts
      1
    • for single D-Sub standard contacts
      2
    • for single stamped D-Sub contact
      1
    • for turned male and female contact
      2
    • for wire end ferrules
      2
    • incl. locator
      3
68 products (of 68)
1/3
Compare
0
Sort by
Filters
0

Topics & Trends