Properties Overview
Inserts
Screw termination
Female
Polyamide (PA)
RAL 9005 (jet black)
Rated current: 10 A
Size: 1 A
Contacts: 2
Conductor cross-section: 0.75 ... 1.5 mm²
Copper alloy
Silver plated
Snap-in latches
Product Details
Identification
- Category Inserts
- Series Han® 1A
Version
- Termination method Screw termination
- Gender Female
- Size 1 A
- Number of contacts 2
- PE contact Yes
- Locking type Snap-in latches
- Details Order separately the single wire seal or the hoods/housings for an IP65 performance.
-
Details
A Han® 1A configuration that only consists of inserts (with or without strain relief, 09 10 000 5300) is an unenclosed connector according to IEC 61984. In this case protection against electric shock must be provided by the installation methods of the user.Contact inserts must not be coupled or decoupled under electrical load.Contact inserts must not be powered-up in the un-mated condition.Contact inserts with screw termination technology (2+PE and 3+PE) only differ in the number of contacts. If both variants are used in one application, the user must prevent incorrect mating! Safety instructions according to VDE 0100-410, Chapter 414.4.3 and EN 60204-1, Chapter 13.4.5 d) must be observed.
Technical characteristics
- Conductor cross-section 0.75 ... 1.5 mm²
- Rated current 10 A
- Rated voltage conductor-earth 230 V
- Rated voltage conductor-conductor 400 V
- Rated impulse voltage 4 kV
- Pollution degree 3
- Rated current acc. to UL 10 A AWG 16
- Rated voltage acc. to UL 250 V
- Insulation resistance >108 Ω
- Tightening torque 0.25 Nm
- Limiting temperature -30 ... +90 °C
- Mating cycles ≥ 100
- Degree of protection acc. to IEC 60529 IP20
Material properties
- Material (insert) Polyamide (PA)
- Colour (insert) RAL 9005 (jet black)
- Material (contacts) Copper alloy
- Surface (contacts) Silver plated
- Material (seal) NBR
- Colour (seal) Black
- Material flammability class acc. to UL 94 V-0
- RoHS compliant with exemption
- RoHS exemptions 6(c): Copper alloy containing up to 4 % lead by weight
- ELV status compliant with exemption
- China RoHS 50
- REACH Annex XVII substances Not contained
- REACH ANNEX XIV substances Not contained
- REACH SVHC substances Yes
- REACH SVHC substances Lead
- ECHA SCIP number 5dbb3851-b94e-4e88-97a1-571845975242
- California Proposition 65 substances Yes
- California Proposition 65 substances Lead
- Fire protection on railway vehicles EN 45545-2 (2020-08)
-
Requirement set with Hazard Levels
R22 (HL 1-3)R23 (HL 1-3)
Specifications and approvals
Commercial data
- Packaging size 1
- Net weight 13 g
- Country of origin Germany
- European customs tariff number 85366990
- GTIN 5713140185692
- ETIM EC000438
- eCl@ss 27440205 Contact insert for industrial connectors
Downloads
Download Package
Knowledge
Videos
0
Compare
