Close
Tools
Subcategories
Cutting / stripping insulation

Cutting / stripping insulation
Crimping

Crimping
Press in

Press in
Dis-/assemble

Dis-/assemble
Measure

Measure
Cutting / stripping insulation

Cutting / stripping insulation
Crimping

Crimping
Press in

Press in
Dis-/assemble

Dis-/assemble
Measure

Measure
Filters
  • Type of tool
    Select a value Reset filter
    • 8-indent crimping tool
      1
    • Adapter
      1
    • Adjustment gauge
      2
    • Assembly tool
      28
    • Base plate
      1
    • Battery crimping tool set
      1
    • Battery hydraulic punch driver
      1
    • Battery hydraulic tool
      2
    • Bench press
      2
    • Bit ¼in as a spare part for guiding pins and bushes
      1
    • Bottom tool
      14
    • Bottom tool carrier
      2
    • Cable cutter
      1
    • Cable test adapter
      1
    • Cabling tool for termination
      7
    • Centering plate female
      2
    • Check gauge
      2
    • Crimp die
      22
    • Crimping insert
      39
    • Crimping machine BK
      1
    • Crimping machine TC-C01
      3
    • Crimping machine TK-M
      1
    • Crimping tool
      3
    • Dynamometric screwdriver
      7
    • Foot switch
      1
    • Guide frame
      1
    • Han® VDE Screw Driver Set
      1
    • Hand crimping tool
      40
    • Hand hydraulic crimping tool
      2
    • Hexagonal driver
      6
    • Hexagonal head screwdriver
      1
    • Hexagonal scewdriver
      1
    • Hydraulic hand punch driver
      1
    • Insert
      15
    • Insert blocks
      7
    • Insert top tool
      2
    • Insertion / removal tools
      5
    • Interchangeable blades
      1
    • Interchangeable unit
      6
    • Locator
      38
    • One click cleaner
      2
    • PCB
      4
    • Pliers
      2
    • Pneumatic crimping tool
      2
    • Pneumatic press
      1
    • Polishing paper
      3
    • Polishing tool
      6
    • Polishing tool HP duplex
      1
    • Press-out tool
      4
    • Punching units
      21
    • Quick change tool
      7
    • Removal tool
      47
    • Replacement-tip
      4
    • Screw driver
      2
    • Screw driver set Slimline
      1
    • Service case
      1
    • Service crimping tool
      1
    • Slider
      2
    • Spacer block
      6
    • Spare blade cassette
      1
    • Spare part
      1
    • Spare part box
      1
    • Stripping blade set
      3
    • Stripping tool
      3
    • Support block
      1
    • Table fixing
      1
    • Tool insert
      3
    • Tool-kit
      2
    • Top tool
      67
    • Top tool carrier
      2
    • Torque set
      4
    • Torque tool
      1
    • Wire cutter
      1
    • Wire fixing rubber
      1
  • Description of the tool
    Select a value Reset filter
    • 10 poles
      3
    • 14 poles
      3
    • 16 poles
      2
    • 20 poles
      2
    • 26 poles
      3
    • 34 poles
      2
    • 4 indent crimp in acc. to MIL 22 520/2-01
      2
    • 40 A contact
      2
    • 40 poles
      2
    • 50 poles
      2
    • 64 poles
      3
    • Adapter 3/8in
      3
    • Angled
      2
    • BC / har-bus® 64
      3
    • Bit ¼in
      2
    • Bottom shield
      3
    • Crimp die acc. to DIN 46235 with pressing width 10 ... 14 mm
      2
    • Crimp die acc. to DIN 46235 with pressing width 9 mm
      2
    • D-Sub
      3
    • DIN 41612
      8
    • FC 1
      3
    • FC 2
      4
    • FC 3
      4
    • HARTING PushPull (V4) Power
      2
    • Han D®
      9
    • Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224)
      3
    • Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227)
      2
    • Han E®
      10
    • Han E®: 0.14 ... 4 mm²
      3
    • Han E®: 0.5 ... 4 mm²
      2
    • Han-Modular®
      4
    • Han-Yellock®
      7
    • Han-Yellock®: 0.14 ... 4 mm²
      2
    • Han® C
      8
    • Han® C: 1.5 ... 4 mm²
      5
    • Han® C: 4 ... 10 mm²
      3
    • Han® F+B
      3
    • Han® P
      2
    • Insertion tool for single male press-in contacts
      2
    • Metal
      2
    • Modular insert
      10
    • Narrow
      2
    • Only for short posts and PCB thickness < 1.6 mm and without guide frame
      3
    • Pressing force 120 kN
      2
    • Pressing force 60 kN
      2
    • Punching pressure: 60 kN
      2
    • Relay contacts
      2
    • SC, F-SMA F-ST
      2
    • Spare part
      16
    • Suitable for D-Sub and SEK
      2
    • To produce panel cut outs for connectors
      2
    • With grip
      2
    • With upper shield
      8
    • har-bus® 64
      3
    • acc. to DIN 41626
      2
    • acc. to DIN 46228
      2
    • for 120 kN tool
      11
    • for 250 bandoliered contacts
      3
    • for 3U
      2
    • for 60 kN tool
      6
    • for D-Sub crimp contact
      2
    • for D-Sub mixed
      3
    • for HARTING ix Industrial® to assemble the single wire to the IDC and the cable strain relief crimping
      2
    • for Han-Fast® Lock single contact
      4
    • for Han-Yellock® modules and frames
      2
    • for M23 signal contacts
      2
    • for M8
      2
    • for SEK male low-profile connectors
      14
    • for SEK standard connectors
      10
    • for har-bus 64® female connectors
      4
    • for har-bus® HM Power
      2
    • for angled female connectors
      13
    • for angled male connectors
      2
    • for angled shielded female connectors
      12
    • for assembly of D-Sub hoods
      2
    • for axial screw
      7
    • for contacts FC 1, FC 2 and FC 3
      3
    • for crimping tool 09 99 000 0888
      3
    • for discrete wire termination
      8
    • for flange
      3
    • for hydraulic punch drivers
      21
    • for individual DIN 41612 contacts
      6
    • for individual contacts
      4
    • for ix Industrial® assembly tool
      3
    • for part number 09 99 000 0509
      4
    • for part number 09 99 000 0647
      35
    • for part number 09 99 000 0990
      5
    • for single D-Sub standard contacts
      3
    • for straight male connectors
      31
    • for type A
      8
    • for type AB
      21
    • for type B
      22
    • for type C
      6
    • for type D
      7
    • for type E
      7
    • for use with female connectors
      11
    • for use with male connectors
      9
    • for wire end ferrules
      4
    • incl. insert
      4
    • incl. locator
      4
  • Field of application
    Select a value Reset filter
    • Recommended for field use
      4
    • Recommended for production lines
      6
    • Recommended for stationary use in production lines
      20
    • for individual, turned male and female contacts
      9
    • for more than 25,000 crimping operations per year
      15
    • for stamped contacts on reel (250 ... 10.000)
      8
    • up to 1,000 crimping operations per year
      3
    • up to 10,000 crimping operations per year
      2
    • up to 25,000 crimping operations per year
      3
    • up to 3,000 crimping operations per year
      1
Show all filters
490 products (of 490)
1/17
New products - ascending
CONTACT LUBRICANT (40ml)
Contact lubricant DvDA
CONTACT LUBRICANT (40ml)
Article. No: 09 99 000 0829
for Han® contacts
Vaporizer (40 ml), Handling instruction
Add to Wishlist
Removal Tool Han D
Removal tool
Removal Tool Han D
Article. No: 09 99 000 0012
Han D®
Add to Wishlist
Removal Tool Han E
Removal tool
Removal Tool Han E
Article. No: 09 99 000 0319
Han E®
Add to Wishlist
Removal Tool, Han D, Mini
Removal tool
Removal Tool, Han D, Mini
Article. No: 09 99 000 0052
Han D®, Service
Add to Wishlist
REPLACEMENT TIP. REMOVAL TOOL
Replacement-tip
REPLACEMENT TIP. REMOVAL TOOL
Article. No: 09 99 000 0004
for part number 09 99 000 0012
Add to Wishlist
DIN41612 REMOVAL TOOL
Removal tool
DIN41612 REMOVAL TOOL
Article. No: 09 99 000 0087
for contacts FC 1, FC 2 and FC 3
Add to Wishlist
Han CRIMP TOOL WITH LOCATOR
Service crimping tool
Han CRIMP TOOL WITH LOCATOR
Article. No: 09 99 000 0021
Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 2.5 mm², Han-Yellock®: 0.5 ... 2.5 mm²
Conductor cross-section: 0.14 ... 2.5 mm²
Add to Wishlist
DSUB INSERTION-REMOVAL-TOOL
Insertion / removal tools
DSUB INSERTION-REMOVAL-TOOL
Article. No: 09 99 000 0171
for single D-Sub standard contacts
Add to Wishlist
Removal Tool Han C 1,5-6 mm²
Removal tool
Removal Tool Han C 1,5-6 mm²
Article. No: 09 99 000 0305
Han® C
Conductor cross-section: 1.5 ... 6 mm²
Add to Wishlist
Han Hand Crimp Tool
Hand crimping tool
Han Hand Crimp Tool
Article. No: 09 99 000 0110
Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han-Yellock®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²
Conductor cross-section: 0.14 ... 4 mm²
Add to Wishlist
Insertion Tool, Han
Assembly tool
Insertion Tool, Han
Article. No: 09 99 000 0059
for crimp contacts
Add to Wishlist
Insertion/Removal Tool D-Sub
Insertion / removal tools
Insertion/Removal Tool D-Sub
Article. No: 09 99 000 0368
Han-Modular®, for D-Sub crimp contact
Add to Wishlist
DIN-Tool Demontage Crimp BC
Removal tool
DIN-Tool Demontage Crimp BC
Article. No: 09 99 000 0101
for contacts BC / har-bus® 64
Add to Wishlist
INSERT BLOCK TYPE R
Insert blocks
INSERT BLOCK TYPE R
Article. No: 09 99 000 0277
for use with male connectors, Type R
Add to Wishlist
D SUB HD INSERTION EXTRACTION TOOL
Insertion / removal tools
D SUB HD INSERTION EXTRACTION TOOL
Article. No: 09 99 000 0513
for single D-Sub high density contacts
Add to Wishlist
Double-Indent Crimping Tool
Crimping tool
Double-Indent Crimping Tool
Article. No: 09 99 000 0888
Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227), Han E®: 0.14 ... 4 mm², Han-Yellock®: 0.14 ... 4 mm², Han® C: 1.5 ... 4 mm²
Add to Wishlist
Mounting tool Han D/E/Yellock
Assembly tool
Mounting tool Han D/E/Yellock
Article. No: 09 99 000 0847
for crimp contacts, Small cross-section, Variable length of blade, Han D®, Han E®, Han-Yellock®
Add to Wishlist
Crimping Tool Han C 4/6/10 mm2
Hand crimping tool
Crimping Tool Han C 4/6/10 mm2
Article. No: 09 99 000 0377
Han® C: 4 ... 10 mm²
Conductor cross-section: 4 ... 10 mm²
Add to Wishlist
Removal Tool Han C 10mm²
Removal tool
Removal Tool Han C 10mm²
Article. No: 09 99 000 0381
Han® C
Conductor cross-section: 10 mm²
Add to Wishlist
Removal tool Han-Modular plastic frame
Removal tool
Removal tool Han-Modular plastic frame
Article. No: 09 99 000 0331
for all Han-Modular® modules in plastic frames
Add to Wishlist
DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.
Hand crimping tool
DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.
Article. No: 09 99 000 0501
for turned male and female contacts, 4 indent crimp in acc. to MIL 22 520/2-01
Conductor cross-section: 0.09 ... 0.82 mm²
Add to Wishlist
D SUB MIXED INSERTION EXTRACTION TOOL SI
Insertion / removal tools
D SUB MIXED INSERTION EXTRACTION TOOL SI
Article. No: 09 99 000 0511
for D-Sub mixed
Add to Wishlist
Locator D-Sub turned standard contacts
Locator
Locator D-Sub turned standard contacts
Article. No: 09 99 000 0531
for single D-Sub standard contacts
Add to Wishlist
basic hand crimp tool BC/FC/har-bus64
Hand crimping tool
basic hand crimp tool BC/FC/har-bus64
Article. No: 09 99 000 0620
for individual DIN 41612 contacts, BC / FC / har-bus® 64
Add to Wishlist
DIN-TOOL MONTAGE CRIMP FC
Assembly tool
DIN-TOOL MONTAGE CRIMP FC
Article. No: 09 99 000 0088
DIN 41612, for contacts FC 1, FC 2 and FC 3
Add to Wishlist
crimp set FC 3
Crimping insert
crimp set FC 3
Article. No: 09 99 000 0623
for individual contacts, FC 3
Conductor cross-section: 0.5 ... 1.5 mm² for FC 3 contacts
Add to Wishlist
Hexagonal Screw Driver SW 2
Hexagonal scewdriver
Hexagonal Screw Driver SW 2
Article. No: 09 99 000 0313
for axial screw, With grip, 40 A contact
Wrench size: 2
Add to Wishlist
preLink Assembly tool
Assembly tool
preLink Assembly tool
Article. No: 20 82 000 9901
for preLink® termination block
Add to Wishlist
SUB-D CRIMP TOOL SINGLE CONTACT
Hand crimping tool
SUB-D CRIMP TOOL SINGLE CONTACT
Article. No: 09 99 000 0175
for single stamped D-Sub contact
Conductor cross-section: 0.09 ... 0.56 mm²
Add to Wishlist
Removal Tool f. Han ES
Assembly tool
Removal Tool f. Han ES
Article. No: 09 99 000 0367
for Han® ES insert
Add to Wishlist
1 2 3 more 17
Compare
0
Sort by
Filters
0

Topics & Trends

HARTING Newsletter