Close
Crimping tools
  • Can be processed manually
  • Gas-tight crimp connections
  • Ergonomic design
Filters
  • Field of application
    Select a value Reset filter
    • Recommended for field use
      4
    • Recommended for production lines
      6
    • Recommended for stationary use in production lines
      2
    • for individual, turned male and female contacts
      2
    • up to 1,000 crimping operations per year
      3
    • up to 10,000 crimping operations per year
      2
    • up to 3,000 crimping operations per year
      1
  • Wrench size
    Select a value Reset filter
    • 3
      1
    • 3.8
      1
    • 4.3
      1
    • 4.95
      2
    • 5
      1
    • 5.5
      1
    • 6
      1
    • 6.5
      3
    • 7
      2
    • 7.5
      2
    • 8
      2
    • 8.5
      2
    • 9
      2
    • 9.5
      2
    • 10
      2
    • 10.5
      1
    • 11
      1
    • 11.5
      1
    • 12
      1
    • 12.5
      1
    • 13
      1
    • 13.5
      1
    • 14
      1
    • 14.5
      1
    • 15
      1
    • 15.5
      1
    • 16
      1
    • 16.5
      1
    • 17
      1
    • 17.5
      1
    • 18
      1
  • Category
    Select a value Reset filter
    • Tools
      159
  • Identification
    Select a value Reset filter
    • Power
      2
  • Details
    Select a value Reset filter
    • Adjustment of the crimping depth: see table in the data sheet
      4
    • Head openable
      1
    • Not to be used for 0.6 mm contacts.
      1
    • Please order crimp dies separately.
      2
    • Please order locator separately.
      1
    • for crimping of the strain relief
      2
  • Type of tool
    Select a value Reset filter
    • 8-indent crimping tool
      1
    • Adjustment gauge
      2
    • Battery crimping tool set
      1
    • Battery hydraulic tool
      2
    • Check gauge
      2
    • Crimp die
      22
    • Crimping insert
      39
    • Crimping tool
      3
    • Foot switch
      1
    • Hand crimping tool
      41
    • Hand hydraulic crimping tool
      2
    • Locator
      38
    • Pneumatic crimping tool
      2
    • Service case
      1
    • Service crimping tool
      1
    • Table fixing
      1
Show all filters
159 products (of 159)
1/6
New products - ascending
Han CRIMP TOOL WITH LOCATOR
Service crimping tool
Han CRIMP TOOL WITH LOCATOR
Article. No: 09 99 000 0021
Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 2.5 mm², Han-Yellock®: 0.5 ... 2.5 mm²
Conductor cross-section: 0.14 ... 2.5 mm²
Add to Wishlist
Han Hand Crimp Tool
Hand crimping tool
Han Hand Crimp Tool
Article. No: 09 99 000 0110
Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han-Yellock®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²
Conductor cross-section: 0.14 ... 4 mm²
Add to Wishlist
Double-Indent Crimping Tool
Crimping tool
Double-Indent Crimping Tool
Article. No: 09 99 000 0888
Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227), Han E®: 0.14 ... 4 mm², Han-Yellock®: 0.14 ... 4 mm², Han® C: 1.5 ... 4 mm²
Add to Wishlist
Crimping Tool Han C 4/6/10 mm2
Hand crimping tool
Crimping Tool Han C 4/6/10 mm2
Article. No: 09 99 000 0377
Han® C: 4 ... 10 mm²
Conductor cross-section: 4 ... 10 mm²
Add to Wishlist
DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.
Hand crimping tool
DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.
Article. No: 09 99 000 0501
for turned male and female contacts, 4 indent crimp in acc. to MIL 22 520/2-01
Conductor cross-section: 0.09 ... 0.82 mm²
Add to Wishlist
Locator D-Sub turned standard contacts
Locator
Locator D-Sub turned standard contacts
Article. No: 09 99 000 0531
for single D-Sub standard contacts
Add to Wishlist
basic hand crimp tool BC/FC/har-bus64
Hand crimping tool
basic hand crimp tool BC/FC/har-bus64
Article. No: 09 99 000 0620
for individual DIN 41612 contacts, BC / FC / har-bus® 64
Add to Wishlist
crimp set FC 3
Crimping insert
crimp set FC 3
Article. No: 09 99 000 0623
for individual contacts, FC 3
Conductor cross-section: 0.5 ... 1.5 mm² for FC 3 contacts
Add to Wishlist
SUB-D CRIMP TOOL SINGLE CONTACT
Hand crimping tool
SUB-D CRIMP TOOL SINGLE CONTACT
Article. No: 09 99 000 0175
for single stamped D-Sub contact
Conductor cross-section: 0.09 ... 0.56 mm²
Add to Wishlist
Crimp set BC/FC1/har-bus 64
Crimping insert
Crimp set BC/FC1/har-bus 64
Article. No: 09 99 000 0621
for individual contacts, BC / FC 1 / har-bus® 64
Conductor cross-section: 0.09 ... 0.5 mm² for BC contacts 0.09 ... 0.25 mm² for FC 1 contacts
Add to Wishlist
crimp set FC 2
Crimping insert
crimp set FC 2
Article. No: 09 99 000 0622
for individual contacts, FC 2
Conductor cross-section: 0.14 ... 0.56 mm² for FC 2 contacts
Add to Wishlist
Go / no-go gauge for 09990000888
Check gauge
Go / no-go gauge for 09990000888
Article. No: 09 99 000 0889
for crimping tool 09 99 000 0888, for optional testing
Add to Wishlist
DIN-Tool Positionierer FC
Locator
DIN-Tool Positionierer FC
Article. No: 09 99 000 0631
FC, for part number 09 99 000 0620
Add to Wishlist
D SUB HD SERVICE CRIMP TOOL
Hand crimping tool
D SUB HD SERVICE CRIMP TOOL
Article. No: 09 99 000 0596
Add to Wishlist
Crimptool Opening
Hand crimping tool
Crimptool Opening
Article. No: 09 99 000 0647
for crimp barrel and crimp flange
Add to Wishlist
Crimp die 16mm² for 60 kN tool
Crimp die
Crimp die 16mm² for 60 kN tool
Article. No: 09 99 000 0853
for 60 kN tool
Conductor cross-section: 16 mm²
Add to Wishlist
Crimp die 10mm² for 60 kN tool
Crimp die
Crimp die 10mm² for 60 kN tool
Article. No: 09 99 000 0852
for 60 kN tool
Conductor cross-section: 10 mm²
Add to Wishlist
Locator Set Han D/E/C, for Crimping tool
Locator
Locator Set Han D/E/C, for Crimping tool
Article. No: 09 99 000 0376
Spare part, Han D®, Han E®, Han® C
Add to Wishlist
Crimp die 25mm² for 60 kN tool
Crimp die
Crimp die 25mm² for 60 kN tool
Article. No: 09 99 000 0854
for 60 kN tool
Conductor cross-section: 25 mm²
Add to Wishlist
Crimp die 35mm² for 60 kN tool
Crimp die
Crimp die 35mm² for 60 kN tool
Article. No: 09 99 000 0855
for 60 kN tool
Conductor cross-section: 35 mm²
Add to Wishlist
Hand hydraulic crimping tool 60 kN
Hand hydraulic crimping tool
Hand hydraulic crimping tool 60 kN
Article. No: 09 99 000 0851
Pressing force 60 kN, Crimp die acc. to DIN 46235 with pressing width 9 mm
Conductor cross-section: 10 ... 70 mm²
Add to Wishlist
Locator f. crimping-tool 09990000888
Locator
Locator f. crimping-tool 09990000888
Article. No: 09 99 000 0887
Spare part, for crimping tool 09 99 000 0888
Add to Wishlist
DSUB HAND CRIMP TOOL POWER CONTACT
Hand crimping tool
DSUB HAND CRIMP TOOL POWER CONTACT
Article. No: 09 99 000 0509
for power contacts
Conductor cross-section: 0.5 ... 6 mm²
Add to Wishlist
DIN-Tool Positionierer BC
Locator
DIN-Tool Positionierer BC
Article. No: 09 99 000 0630
BC / har-bus® 64, for part number 09 99 000 0620
Add to Wishlist
Locator D-Sub für. 0501 (Gigabit Modul )
Locator
Locator D-Sub für. 0501 (Gigabit Modul )
Article. No: 09 99 000 0897
for single D-Sub standard contacts, 09 93 000 5576 + 09 93 000 5476
Add to Wishlist
DSUB HAND TOOLS
Hand crimping tool
DSUB HAND TOOLS
Article. No: 09 99 000 0169
for 500 bandoliered standard contacts
Conductor cross-section: 0.09 ... 0.56 mm²
Add to Wishlist
Han Yellock Locator for 0021 tool
Locator
Han Yellock Locator for 0021 tool
Article. No: 09 99 000 0343
Han-Yellock®
Add to Wishlist
Crimp die 50mm² for 60 kN tool
Crimp die
Crimp die 50mm² for 60 kN tool
Article. No: 09 99 000 0856
for 60 kN tool
Conductor cross-section: 50 mm²
Add to Wishlist
Battery Crimping Tool Set
Battery crimping tool set
Battery Crimping Tool Set
Article. No: 09 99 000 0990
Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²
Conductor cross-section: 0.14 ... 4 mm²
Add to Wishlist
CRIMPING TOOL
Hand crimping tool
CRIMPING TOOL
Article. No: 09 99 000 0120
for 250 bandoliered contacts, FC 3
Conductor cross-section: 0.5 ... 1.5 mm²
Add to Wishlist
1 2 3 more 6
Compare
0
Sort by
Filters
0

Topics & Trends

HARTING Newsletter